VM虚拟机Bridge模式VMnet0网卡无法启动问题的解决
2011-04-11 23:54
656 查看
晚上犯懒,决定坐在床上用笔记本开VM虚拟机做试验。但虚拟机在Bridge模式VMnet0网卡始终无法启动,奇怪的是同样的配置在台式机上完全正常。查看虚拟机的Message log,发现一条错误信息:
The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down
summy
The virtual machine may not be able to communicate with the host or with other machines on your network
大意就是虚拟机无法与主机网络进行联接。
网络好好的怎么会联不上呢?于是打开VMWARE的Virtual Network Editor,查看VMnet0设置中Bridge to默认联接的是笔记本有线网卡,但我现在却是通过无线上网。原来如此,设为Automatic后重启虚拟机,一切OK!
The network bridge on device VMnet0 is temporarily down because the bridged Ethernet interface is down
summy
The virtual machine may not be able to communicate with the host or with other machines on your network
大意就是虚拟机无法与主机网络进行联接。
网络好好的怎么会联不上呢?于是打开VMWARE的Virtual Network Editor,查看VMnet0设置中Bridge to默认联接的是笔记本有线网卡,但我现在却是通过无线上网。原来如此,设为Automatic后重启虚拟机,一切OK!
相关文章推荐
- vmware克隆Centos6.4虚拟机网卡无法启动问题的解决方法
- 通过进入单用户模式解决linux中的rc.local修改后无法启动的问题
- 解决tomcat在Debug模式下无法启动问题
- 解决克隆虚拟机后网卡设备无法识别启动问题的方法
- centos7将网卡加入到网桥后, Missing config file br-ex,网卡无法正常启动问题解决
- 通过进入单用户模式解决linux中的rc.local修改后无法启动的问题
- VM虚拟机网络在Bridge模式下,本机不能连接SSH问题的解决
- CentOS7 VMware虚拟机克隆 网卡无法启动问题解决
- 3.通过进入单用户模式解决linux中的rc.local修改后无法启动的问题
- centos7将网卡加入到网桥后,网卡无法正常启动问题解决
- 解决Vmware虚拟机中克隆Centos后无法启动网卡的问题
- 老男孩解决vmware克隆Centos6.4虚拟机网卡无法启动问题
- 通过进入单用户模式解决linux中的rc.local修改后无法启动的问题
- [trouble-shooting]android 无法启动X86模式虚拟机的问题解决。
- centos7将网卡加入到网桥后, Missing config file br-ex,网卡无法正常启动问题解决
- Device eth0 does not seem to be present, delaying initialization(解决克隆CentOS6.3虚拟机后网卡设备无法启动问题)
- Cisco Catalyst 交换机一直处于rommon模式无法启动IOS问题的解决
- 问题解决——VM虚拟机克隆后网卡启动不起来device eth0 does not seem to be present, delaying initialization
- 解决Linux-CentOS 7.0 VMware虚拟机没有网卡不识别问题和Vmware提示无法将网络更改为桥接模式
- 关于 RHEL 6.0有线网卡设备无法启动的问题的解决