mdt wds部署windows Litetouch deployment failed, Return Code = -2147467259 0x80004005解决
2011-03-18 15:57
701 查看
部署到最后居然出错,郁闷
Litetouch deployment failed, Return Code = -2147467259 0x80004005
查了半天终于又点结果 记录下来
方法一
On your Windows 7 reference PC, open the registry editor. Navigate to HKLM\system\setup. Look for a multi-string value called "CloneTag". I'm guessing it's not there.
Add a new multi-string value, name it "CloneTag". The actual value is not important. I'm not sure if case on the name is important, so I mimicked what the error suggested.
Export the HKLM\system\setup key and save to a .reg file.
Edit the .reg file, and remove all other entries except for the CloneTag value.
Run the cscript to launch the Task Sequence selector. Select your Sysprep and Capture Task Sequence. Enter your credentials, and go.
When it gets to the part where it is executing sysprep, run your .reg file to quickly import the CloneTag multi-string value. If you see it proceed to PE, then you should be in the clear.
方法二
Go to the Scripts folder in your DS box
Create a backup of the LTISysprep file somewhere on your desktop so you'll have a copy if something goes awry
Open the LTISysprep file with Notepad
Remove the oShell.RegDelete "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" line
Close and save the file
Update your Deployment Share
Proceed to capture the image by logging into the reference computer and running the LiteTouch script on your DS machine
方法三:
This failure happened due to the registry key CloneTag under HKLM\SYSTEM\Setup is deleted during the start of the sysprep. There are few ways to counter this failure:
1. Go to your sysprep and capturing task sequence, Execute Sysprep, Options tab, Add, Registry Setting. Enter SYSTEM\Setup in the key box, and enter CloneTag in the value name box and leave the value box blank. This whole step is to add the registry key back to HKLM\SYSTEM\Setup after the sysprep completed
2. (Same as the fix suggested by Jimmy Lam-My) You can also modify the script to prevent the registry key from being deleted. Go to your deploymentshare folder and look for a script named LITSysprep inside the scripts folder. Right click, edit to do modification in the script. You can either remove the oShell.RegDelete "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" or you might want to add .// infront to turn it into a comment.
摘自:尽量参考原文
http://social.technet.microsoft.com/Forums/zh-CN/mdt/thread/1a0b6555-e4b2-40de-bfaf-eb8ff7710d60
http://social.technet.microsoft.com/Forums/en/mdt/thread/553bec59-d795-4b89-8328-19a38161eff3本文出自 “曾经的过去” 博客,请务必保留此出处http://511cto.blog.51cto.com/619759/518771
Litetouch deployment failed, Return Code = -2147467259 0x80004005
查了半天终于又点结果 记录下来
方法一
On your Windows 7 reference PC, open the registry editor. Navigate to HKLM\system\setup. Look for a multi-string value called "CloneTag". I'm guessing it's not there.
Add a new multi-string value, name it "CloneTag". The actual value is not important. I'm not sure if case on the name is important, so I mimicked what the error suggested.
Export the HKLM\system\setup key and save to a .reg file.
Edit the .reg file, and remove all other entries except for the CloneTag value.
Run the cscript to launch the Task Sequence selector. Select your Sysprep and Capture Task Sequence. Enter your credentials, and go.
When it gets to the part where it is executing sysprep, run your .reg file to quickly import the CloneTag multi-string value. If you see it proceed to PE, then you should be in the clear.
方法二
Go to the Scripts folder in your DS box
Create a backup of the LTISysprep file somewhere on your desktop so you'll have a copy if something goes awry
Open the LTISysprep file with Notepad
Remove the oShell.RegDelete "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" line
Close and save the file
Update your Deployment Share
Proceed to capture the image by logging into the reference computer and running the LiteTouch script on your DS machine
方法三:
This failure happened due to the registry key CloneTag under HKLM\SYSTEM\Setup is deleted during the start of the sysprep. There are few ways to counter this failure:
1. Go to your sysprep and capturing task sequence, Execute Sysprep, Options tab, Add, Registry Setting. Enter SYSTEM\Setup in the key box, and enter CloneTag in the value name box and leave the value box blank. This whole step is to add the registry key back to HKLM\SYSTEM\Setup after the sysprep completed
2. (Same as the fix suggested by Jimmy Lam-My) You can also modify the script to prevent the registry key from being deleted. Go to your deploymentshare folder and look for a script named LITSysprep inside the scripts folder. Right click, edit to do modification in the script. You can either remove the oShell.RegDelete "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" or you might want to add .// infront to turn it into a comment.
摘自:尽量参考原文
http://social.technet.microsoft.com/Forums/zh-CN/mdt/thread/1a0b6555-e4b2-40de-bfaf-eb8ff7710d60
http://social.technet.microsoft.com/Forums/en/mdt/thread/553bec59-d795-4b89-8328-19a38161eff3本文出自 “曾经的过去” 博客,请务必保留此出处http://511cto.blog.51cto.com/619759/518771
相关文章推荐
- 解决FastCGI Error Error Number: -2147467259 (0x80004005). 和 Error Number: -1073741819 (0xc0000005).
- OSD部署故障 Code(0x00000001) 0x80004005
- Windows Server 2008R2安装WDS+MDT2012后,无法启动部署服务的解决办法
- 解决FastCGI Error Error Number: -2147467259 (0x80004005). 和 Error Number: -1073741819 (0xc0000005).
- 安装EntityFramework(EFCodeFirst)遇到的问题(0X80004005)的解决办法
- FastCGI Error Error Number: -2147467259 (0x80004005)的解决思路和办法
- 【Vegas原创】SQL:xp_sendmail:由于邮件错误0x80004005而失败解决方法
- 根据一位博友用(MDT+WDS部署windows xp)
- 用MDT 2012为企业部署windows 7(十三)--结合WDS部署部署windows 7客户端
- WDS+MDT+WAIK简单部署Win7之捕捉映像
- Decompression function (wgzMemDecompressBuffer) failed, return code=-3的解决办法
- 【Vegas原创】SQL:xp_sendmail:由于邮件错误0x80004005而失败解决方法
- 系统出现0x80004005错误代码快速解决方法
- [已解决]iOS thread exc bad access code = 1 address = 0x6
- MDT2012部署系列之11 WDS安装与配置
- 十五、MDT 2013 Update 1批量部署-利用微软WDS部署服务实现MDT部署组播(多播)
- dllregisterserver 调用失败, 错误代码为0x80004005 的解决办法
- Win7 无法访问局域网内其他电脑以及共享的文件解决办法,以下错误代码:0x80004005解决办法
- WDS+MDT+WAIK简单部署Win7之客户端配置
- MDT2010学习(八),MDT结合WDS部署Win7 x86企业版