SUN OS 5.10(solairs 10) 环境下搭建 vsftp 服务
2010-12-14 11:08
323 查看
SUN OS 5.10 + VSFTPD
操作系统:sun os 5.10 for x86
1.安装VSFTPD-2.3.0
# gzip –d vsftpd-2.3.0.tar.gz
# tar xvf vsftpd-2.3.0.tar
# cd vsftpd-2.3.0
# make install
# mv vsftpd.conf /etc/
# mkdir /usr/share/empty
2. 建立vsftp用户和目录
# cd
# mkdir FTPDIR
# groupadd gvsftp1
# useradd -d /FTPDIR -g gvsftp1 -s /bin/false ftpmagr1 //实际使用的USER
# chown ftpmagr1:gvsftp1 /FTPDIR
# useradd -d /dev/null -g gvsftp1 -s /bin/false ftpuser1 //要用来影射的USER
# passwd ftpuser1
# 123
# 123
3. 分别对每个用户进行控制
用户配置:
# vi /etc/vsftpd.chroot_list
ftpmagr1
# vi /etc/vsftpd.user_list
ftpuser1
# mkdir /etc/vsftpd
# vi /etc/vsftpd/ftpuser1
anon_world_readable_only=NO
write_enable=YES
anon_upload_enable=YES
anon_mkdir_write_enable=YES
anon_max_rate=102400
4.配置 vsftpd.conf
========================== vsftpd.conf============================
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=NO
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=NO
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=NO
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=nobody
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to Qiuzhiqing PROFTPD service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
user_config_dir=/etc/vsftpd
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=NO
hide_ids=YES
userlist_enable=YES
userlist_deny=NO
userlist_file=/etc/vsftpd.user_list
guest_enable=YES
guest_username=ftpmagr1
max_clients=50
max_per_ip=2
pasv_min_port=55000
pasv_max_port=55100
listen=YES
listen_address=10.70.191.217
========================== vsftpd.conf============================
5. 建立VSFTPD的启动脚本
# vi /etc/rc3.d/S83vsftpd
================================= S83vsftpd ============================
#!/sbin/sh
#
# Copyright (c) 2010 by Qiuzq
# All rights reserved.
#
# mail: qzq_hello@163.com
#ident "@(#)vsftpd 1.0 2010/12/12"
case "$1" in
start)
/usr/local/sbin/vsftpd &
;;
stop)
pkill vsftpd
;;
*)
echo "Usage: $0 { start | stop }"
exit 1
;;
esac
exit 0
================================= S83vsftpd ============================
6. 更改用户权限设置
# chmod 744 /etc/rc3.d/S83vsftpd
# chown root:sys /etc/rc3.d/S83vsftpd
本文出自 “unix网络编程” 博客,请务必保留此出处http://qiuzq.blog.51cto.com/1184000/454952
操作系统:sun os 5.10 for x86
1.安装VSFTPD-2.3.0
# gzip –d vsftpd-2.3.0.tar.gz
# tar xvf vsftpd-2.3.0.tar
# cd vsftpd-2.3.0
# make install
# mv vsftpd.conf /etc/
# mkdir /usr/share/empty
2. 建立vsftp用户和目录
# cd
# mkdir FTPDIR
# groupadd gvsftp1
# useradd -d /FTPDIR -g gvsftp1 -s /bin/false ftpmagr1 //实际使用的USER
# chown ftpmagr1:gvsftp1 /FTPDIR
# useradd -d /dev/null -g gvsftp1 -s /bin/false ftpuser1 //要用来影射的USER
# passwd ftpuser1
# 123
# 123
3. 分别对每个用户进行控制
用户配置:
# vi /etc/vsftpd.chroot_list
ftpmagr1
# vi /etc/vsftpd.user_list
ftpuser1
# mkdir /etc/vsftpd
# vi /etc/vsftpd/ftpuser1
anon_world_readable_only=NO
write_enable=YES
anon_upload_enable=YES
anon_mkdir_write_enable=YES
anon_max_rate=102400
4.配置 vsftpd.conf
========================== vsftpd.conf============================
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=NO
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=NO
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=NO
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=nobody
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to Qiuzhiqing PROFTPD service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
user_config_dir=/etc/vsftpd
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=NO
hide_ids=YES
userlist_enable=YES
userlist_deny=NO
userlist_file=/etc/vsftpd.user_list
guest_enable=YES
guest_username=ftpmagr1
max_clients=50
max_per_ip=2
pasv_min_port=55000
pasv_max_port=55100
listen=YES
listen_address=10.70.191.217
========================== vsftpd.conf============================
5. 建立VSFTPD的启动脚本
# vi /etc/rc3.d/S83vsftpd
================================= S83vsftpd ============================
#!/sbin/sh
#
# Copyright (c) 2010 by Qiuzq
# All rights reserved.
#
# mail: qzq_hello@163.com
#ident "@(#)vsftpd 1.0 2010/12/12"
case "$1" in
start)
/usr/local/sbin/vsftpd &
;;
stop)
pkill vsftpd
;;
*)
echo "Usage: $0 { start | stop }"
exit 1
;;
esac
exit 0
================================= S83vsftpd ============================
6. 更改用户权限设置
# chmod 744 /etc/rc3.d/S83vsftpd
# chown root:sys /etc/rc3.d/S83vsftpd
本文出自 “unix网络编程” 博客,请务必保留此出处http://qiuzq.blog.51cto.com/1184000/454952
相关文章推荐
- 基于CentOS与VmwareStation10搭建Oracle11G RAC 64集群环境:2.搭建环境-2.10.配置用户NTF服务
- hadoop的windows远程linux服务进行本地开发环境搭建
- 基于CentOS与VmwareStation10搭建Oracle11G RAC 64集群环境:4.安装Oracle RAC FAQ-4.2.Oracleasm Createdisk ASM磁盘失败:Instantiating disk: failed
- LNMP环境搭建之Nginx服务启动失败
- 【CentOS7】服务环境搭建
- 基于CentOS与VmwareStation10搭建Oracle11G RAC 64集群环境:3.安装Oracle RAC-3.2.安装 cvuqdisk 软件包
- Linux服务器应用实战——服务环境快速搭建
- Linux下搭建vsftp服务器、java、mysql、activemq、zookeeper、nginx、redis环境
- 如何在 Windows 10 中搭建 Node.js 环境?
- CentOS下Nginx+fastcgi+python3搭建web.py服务环境
- 搭建FTP服务 搭建Http静态服务器环境
- ubuntu java开发环境搭建 公司技术spring微服务 angular2
- Redis探索之旅(4)- 在Linux环境下搭建单实例Redis服务实例
- Java环境搭建MyEclipse10+jdk1.8
- Android实战(三)------Myeclipse10搭建android运行环境图文详细步骤--------ADT插件在线安装
- window 10 64bit 安装nodejs v7.0.5 + npm v4.1.2 + Express 4.x及搭建web开发环境
- 基于CentOS与VmwareStation10搭建Oracle11G RAC 64集群环境:4.安装Oracle RAC FAQ-4.3.Oracle 集群节点间连通失败
- 从0开始搭建阿里云(腾讯云)ubuntu16.04 nodejs + nginx + mysql + pm2 服务(四、pm2环境搭建)
- win10+vs2015 openGL freeglut+glew环境搭建
- spark学习10(win下利用Intellij IDEA搭建spark开发环境)