Jrebel3.1.2a+eclipse3.6使用配置
2010-11-09 15:33
204 查看
我的确很懒,8月中旬就配置好了,直到现在才开始写这篇文章说说配置,其实网上已经有很多人写过相同主题的东东了。但是这是我自己的配置,自己记一笔,以后万一机器重装系统什么的,也可以按图索骥来一遍,很快的配置完成。
第一步:
将附件中3.1.2a解压到本地。然后将附件中jrebel.jar文件拷贝到解压路径覆盖原先的jrebel.jar.
第二步:
安装eclipse的jrebel插件。插件路径为:http://www.zeroturnaround.com/update-site/。
安装完成后在window-->preferences中的jrebel中进行设置,如下图:
第三步:
Windows--> show view--> other--> server--> servers.双击你的Server配置项
点击“ Open launch configuration”。如下图:
在VM arguments选框中加入参数:
-noverify -javaagent:D:\jrebel-3.1.2a\jrebel.jar
-Drebel.dirs=E:\workspace\fileManager1\WebRoot\WEB-INF\classes
-Drebel.spring_plugin=true
-Drebel.struts2-plugin=true
如下图:
然后点“OK”后,选取某个项目,启动server,如下图:
之后在console控制台中,看见下列文字,则表明jrebel配置成功.
#############################################################
JRebel 3.1.2a (201008121555)
with Enterprise Add-On! (see http://jrebel.com/enterprise) (c) Copyright ZeroTurnaround OU, Estonia, Tartu.
Over the last 1 days JRebel prevented
at least 0 redeploys/restarts saving you about 0 hours.
This product is licensed to www.cfsoft.com
for up to 9999 developer seats on site.
The following plugins are disabled at the moment:
* EclipseLink Plugin (set -Drebel.eclipselink_plugin=true to enable)
Reloads EntityManagerFactory when configuration changes
* Log4j plugin (set -Drebel.log4j-plugin=true to enable)
Reloads full configuration of log4j
* Stripes plugin 1.0.11 (set -Drebel.stripes_plugin=true to enable)
Adds reloading of Stripes ActionBeans.
* TopLink Plugin (set -Drebel.toplink_plugin=true to enable)
Reloads EntityManagerFactory when configuration changes
* TopLink Spring Plugin (set -Drebel.toplink_spring_plugin=true to enable)
Reloads SeesionFactory when configuration changes
* WebObjects Plugin (set -Drebel.webobjects_plugin=true to enable)
WebObjects JRebel Plugin
#############################################################
JRebel: Directory 'E:\workspace\fileManager1\WebRoot\WEB-INF\classes' will be monitored for class changes.
本文附件下载:
jrebel.jar (2.2 MB)
jrebel-3.1.2a-nosetup.zip (9.2 MB)
已有 0 人发表留言,猛击->>这里<<-参与讨论
JavaEye推荐
—软件人才免语言低担保 赴美带薪读研!—
第一步:
将附件中3.1.2a解压到本地。然后将附件中jrebel.jar文件拷贝到解压路径覆盖原先的jrebel.jar.
第二步:
安装eclipse的jrebel插件。插件路径为:http://www.zeroturnaround.com/update-site/。
安装完成后在window-->preferences中的jrebel中进行设置,如下图:
第三步:
Windows--> show view--> other--> server--> servers.双击你的Server配置项
点击“ Open launch configuration”。如下图:
在VM arguments选框中加入参数:
-noverify -javaagent:D:\jrebel-3.1.2a\jrebel.jar
-Drebel.dirs=E:\workspace\fileManager1\WebRoot\WEB-INF\classes
-Drebel.spring_plugin=true
-Drebel.struts2-plugin=true
如下图:
然后点“OK”后,选取某个项目,启动server,如下图:
之后在console控制台中,看见下列文字,则表明jrebel配置成功.
#############################################################
JRebel 3.1.2a (201008121555)
with Enterprise Add-On! (see http://jrebel.com/enterprise) (c) Copyright ZeroTurnaround OU, Estonia, Tartu.
Over the last 1 days JRebel prevented
at least 0 redeploys/restarts saving you about 0 hours.
This product is licensed to www.cfsoft.com
for up to 9999 developer seats on site.
The following plugins are disabled at the moment:
* EclipseLink Plugin (set -Drebel.eclipselink_plugin=true to enable)
Reloads EntityManagerFactory when configuration changes
* Log4j plugin (set -Drebel.log4j-plugin=true to enable)
Reloads full configuration of log4j
* Stripes plugin 1.0.11 (set -Drebel.stripes_plugin=true to enable)
Adds reloading of Stripes ActionBeans.
* TopLink Plugin (set -Drebel.toplink_plugin=true to enable)
Reloads EntityManagerFactory when configuration changes
* TopLink Spring Plugin (set -Drebel.toplink_spring_plugin=true to enable)
Reloads SeesionFactory when configuration changes
* WebObjects Plugin (set -Drebel.webobjects_plugin=true to enable)
WebObjects JRebel Plugin
#############################################################
JRebel: Directory 'E:\workspace\fileManager1\WebRoot\WEB-INF\classes' will be monitored for class changes.
本文附件下载:
jrebel.jar (2.2 MB)
jrebel-3.1.2a-nosetup.zip (9.2 MB)
已有 0 人发表留言,猛击->>这里<<-参与讨论
JavaEye推荐
—软件人才免语言低担保 赴美带薪读研!—
相关文章推荐
- 热部署插件JRebel在Eclipse和Intellij IDEA中的安装与配置(非破解,官方正版永久使用)
- Jrebel 的配置及使用(实现WEB应用的热部署)
- jrebel使用配置
- Jrebel 的配置及使用
- Jrebel 的配置及使用(实现WEB应用的热部署)
- Myeclipse2015 Jrebel插件的安装、配置、使用(新建.java文件、给类添加新方法、新属性、修改代码等,不用重启tomcat即可更新)
- Jrebel 的配置及使用(实现WEB应用的热部署)
- spring boot 使用jrebel配置热部署
- 使用ControllerClassNameHandlerMapping+MultiActionController实现零配置
- Mac 系统 使用SourceTree拉取Gitlab项目配置
- Hibernate使用中间表完成单向多对多关联关系的配置和级联操作示例
- RocketMQ延时消息的使用和延时级别的配置
- 配置openldap使用SSL连接
- supervisord简介,配置及使用
- springboot项目 打成war包 使用自定义tomcat配置
- CI中配置类使用
- TDDL+DIAMOND的配置及使用(三):TDDL
- tomcat配置jndi+spring使用jndi数据源
- C++中通过MFC对ini初始化,配置文件的读写使用