Redhat Nginx+PHP安装配置

一、软件包

a) php-5.2.9.tar.gz b) php-5.2.9-fpm-0.5.10-unofficial.diff.gz c) nginx-0.8.52.tar.gz 二、安装步骤 a) tar zxvf php-5.2.9.tar.gz b) gzip -cd php-5.2.9-fpm-0.5.10-unofficial.diff.gz | patch -d php-5.2.9 -p1 c) cd php-5.2.9 d) ./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --enable-sockets --enable-zip e) Make f) make install g) cp php.ini-dist /usr/local/php/etc/php.ini h) useradd nginx i) cd /usr/local/php/etc j) mv php-fpm.conf php-fpm.conf.bak k) vi php-fpm.conf <?xml version="1.0" ?> <configuration> All relative paths in this config are relative to php's install prefix <section name="global_options"> Pid file <value name="pid_file">/usr/local/php/logs/php-fpm.pid</value> Error log file <value name="error_log">/usr/local/php/logs/php-fpm.log</value> Log level <value name="log_level">notice</value> When this amount of php processes exited with SIGSEGV or SIGBUS ... <value name="emergency_restart_threshold">10</value> ... in a less than this interval of time, a graceful restart will be initiated. Useful to work around accidental curruptions in accelerator's shared memory. <value name="emergency_restart_interval">1m</value> Time limit on waiting child's reaction on signals from master <value name="process_control_timeout">5s</value> Set to 'no' to debug fpm <value name="daemonize">yes</value> </section> <workers> <section name="pool"> Name of pool. Used in logs and stats. <value name="name">default</value> Address to accept fastcgi requests on. Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket' <value name="listen_address">127.0.0.1:9000</value> <value name="listen_options"> Set listen(2) backlog <value name="backlog">-1</value> Set permissions for unix socket, if one used. In Linux read/write permissions must be set in order to allow connections from web server. Many BSD-derrived systems allow connections regardless of permissions. <value name="owner"></value> <value name="group"></value> <value name="mode">0666</value> </value> Additional php.ini defines, specific to this pool of workers. <value name="php_defines"> <value name="sendmail_path">/usr/sbin/sendmail -t -i</value> <value name="display_errors">1</value> </value> Unix user of processes <value name="user">nginx</value> Unix group of processes <value name="group">nginx</value> Process manager settings <value name="pm"> Sets style of controling worker process count. Valid values are 'static' and 'apache-like' <value name="style">static</value> Sets the limit on the number of simultaneous requests that will be served. Equivalent to Apache MaxClients directive. Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi Used with any pm_style. <value name="max_children">128</value> Settings group for 'apache-like' pm style <value name="apache_like"> Sets the number of server processes created on startup. Used only when 'apache-like' pm_style is selected <value name="StartServers">20</value> Sets the desired minimum number of idle server processes. Used only when 'apache-like' pm_style is selected <value name="MinSpareServers">5</value> Sets the desired maximum number of idle server processes. Used only when 'apache-like' pm_style is selected <value name="MaxSpareServers">35</value> </value> </value> The timeout (in seconds) for serving a single request after which the worker process will be terminated Should be used when 'max_execution_time' ini option does not stop script execution for some reason '0s' means 'off' <value name="request_terminate_timeout">0s</value> The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file '0s' means 'off' <value name="request_slowlog_timeout">0s</value> The log file for slow requests <value name="slowlog">logs/slow.log</value> Set open file desc rlimit <value name="rlimit_files">65535</value> Set max core size rlimit <value name="rlimit_core">0</value> Chroot to this directory at the start, absolute path <value name="chroot"></value> Chdir to this directory at the start, absolute path <value name="chdir"></value> Redirect workers' stdout and stderr into main error log. If not set, they will be redirected to /dev/null, according to FastCGI specs <value name="catch_workers_output">yes</value> How much requests each process should execute before respawn. Useful to work around memory leaks in 3rd party libraries. For endless request processing please specify 0 Equivalent to PHP_FCGI_MAX_REQUESTS <value name="max_requests">102400</value> Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect. Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+) Makes sense only with AF_INET listening socket. <value name="allowed_clients">127.0.0.1</value> Pass environment variables like LD_LIBRARY_PATH All $VARIABLEs are taken from current environment <value name="environment"> <value name="HOSTNAME">$HOSTNAME</value> <value name="PATH">/usr/local/bin:/usr/bin:/bin</value> <value name="TMP">/tmp</value> <value name="TMPDIR">/tmp</value> <value name="TEMP">/tmp</value> <value name="OSTYPE">$OSTYPE</value> <value name="MACHTYPE">$MACHTYPE</value> <value name="MALLOC_CHECK_">2</value> </value> </section> </workers> </configuration> l) /usr/local/php/sbin/php-fpm start m) cd /var/local/software n) tar zxvf nginx-0.8.52.tar.gz o) rpm -qa |grep prce-devel p) yum -y install pcre-devel q) ./configure --user=nginx --group=nginx --prefix=/usr/local/nginx r) Make s) make install t) cd /usr/local/nginx/conf u) vi nginx.conf user nginx nginx; worker_processes 8; error_log /usr/local/nginx/logs/nginx_error.log crit; pid /usr/local/nginx/logs/nginx.pid; #Specifies the value for maximum file descriptors that can be opened by this process. worker_rlimit_nofile 65535; events { use epoll; worker_connections 65535; } http { include mime.types; default_type application/octet-stream; #charset gb2312; server_names_hash_bucket_size 128; client_header_buffer_size 32k; large_client_header_buffers 4 32k; client_max_body_size 8m; sendfile on; tcp_nopush on; keepalive_timeout 60; tcp_nodelay on; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; gzip on; gzip_min_length 1k; gzip_buffers 4 16k; gzip_http_version 1.0; gzip_comp_level 2; gzip_types text/plain application/x-javascript text/css application/xml; gzip_vary on; #limit_zone crawler $binary_remote_addr 10m; server { listen 80; server_name localhost; index index.html index.htm index.php; root /usr/local/nginx/html/; #limit_conn crawler 20; location ~ .*\.(php|php5)?$ { #fastcgi_pass unix:/tmp/php-cgi.sock; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fcgi.conf; } location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$ { expires 30d; } location ~ .*\.(js|css)?$ { expires 1h; } log_format access '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" $http_x_forwarded_for'; access_log /usr/local/nginx/logs/access.log access; } server { listen 80; server_name localhost; index index.html index.htm index.php; root /usr/local/nginx/html/; location ~ .*\.(php|php5)?$ { #fastcgi_pass unix:/tmp/php-cgi.sock; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fcgi.conf; } log_format wwwlogs '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" $http_x_forwarded_for'; access_log /usr/local/nginx/logs/wwwlogs.log wwwlogs; } server { listen 80; server_name localhost; location / { #stub_status on; access_log off; } } } v) vi fcgi.conf fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; w)vi /usr/local/nginx/html/index.php <?php echo phpinfo; ?> w) /usr/local/nginx/sbin/nginx –t x) /usr/local/nginx/sbin/nginx y) 访问http://localhost/index.php 三、附加 a) /usr/local/php/sbin/php-fpm stop/start//(停止/启动 php-fpm) b) ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'//查找nginx主进程 c) kill -HUP 24959//杀掉nginx主进程（24959根据上面的命令查出pid值） d) killall nginx//杀掉所有nginx进程 e) ps aux|grep nginx//查找所有 nginx进程