Re-sizing Virtual Disks
2010-08-23 11:46
363 查看
Re-sizing Virtual Disks
比较全面的Virtual Disks扩展总结
There are several methods to re-sizing virtual disks listed below. If you want to shrink the disk in ESX3 then using VMmware Converter is the best way to do this, you can no longer use vmkfstools to shrink a disk in ESX3, you can also try using QpartEd to shrink a disk. With all these methods you should make a backup copy of your original vmdk file in case something goes wrong. Also make sure you shutdown the OS cleanly before restarting the VM (GpartEd will sometimes fail otherwise). Methods 1, 4 & 5 are essentially the same using Linux boot CD’s and either GpartEd or QpartEd.
You can also check out my articles I wrote on this that use the methods below:
Using VMware Converter to resize virtual disk files (Pt. 1)
Increasing virtual disk partition size using DISKPART or GpartEd (Pt. 2)
Shutdown the virtual machine you want to resize
Log into the ESX Server console via Putty
Type “vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Power on the Virtual Machine and make sure it boots properly, load Disk Management and you will see the new unallocated space
Now to join the unallocated space to the primary partition, first shutdown the Virtual Machine
Connect the Virtual Machine to the GParted ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Gnome Partition Editor will load, press Enter at the boot screen
At the Boot option screen select Manual Video Card and then select Done
Select US English at the Language screen
Select qwerty/us.map at the Keyboard screen
Select Generic VESA Compatiable at the Video Driver screen
Select 8 at the Display Depth screen
Select 1024×768 at the Resolution screen
Once the partition editor loads, click on /dev/sda1 in the partition list
Click the Resize/Move button
Click and drag the arrow to extend the size of the partition, make sure you do a resize (double arrow) and not a move (four way arrow) so you should 0 free space preceding and following and then click the Resize/Move button
Next click the Apply button and then the operation will start, you can expand Details to see the progress, once completed click the Close button
Click the power button in the bottom right corner, then select reboot
Edit the VM and remove the ISO from the CD/ROM device (change to Client)
When the server restarts it will do a Check Disk, let this complete, Windows will prompt for a reboot after you login
Reboot and load Disk Management and your Primary Partion will be the new size without any unallocated space
Download Converter and install it on the VM that you want to resize the drives, reboot after the install completes
Start Converter application, click the Import Machine button
Click Next at the Welcome screen and then Next again at the Source screen
Select ‘Physical Computer’ and click Next o Select “This Local Machine” and click Next
At the Source Data screen select your volumes and change “Maintain Size” to “Type Size in GB” and enter your new disk size and click Next
At the Destination screen click Next
Select “Import this machine to a Vmware ESX Server or VirtualCenter virtual machine” and click Next
At the Destination login screen, select your ESX/VC server and enter the login information and click Next
At the Virtual Machine Name and Folder screen enter a new name for your VM and select a folder and click Next
At the Host or Cluster screen select a host for your destination and click Next
At the Datastore screen, select a datastore and click Next
At the Networks screen, configure your NICs and click Next
At the Customization screen, click Next
Click Finish and the conversion will begin
Once the Conversion is complete, edit the new VM settings and remove any extra hardware that Converter adds (USB/serial/parallel ports, etc.)
Shutdown your original source VM and power on your new destination VM
Make sure everything is functioning properly on the new VM and you can delete the original VM
Log into the ESX Server console via Putty
Type ”vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Shutdown the second helper virtual machine
Edit the settings of the second VM and add the hard disk from the first VM
Power on the second VM and load the Disk Management snap-in and verify that the disk from the first VM has un-allocated space on it
Select Start, Run and enter diskpart.exe
The command ‘list volume’ will show you all volumes.
Select your volume based on the results of the list volume command, ie. ‘select volume 1′
Type the command ‘extend’ to extend the volume
Check the Disk Management snap-in again and the volume should be extended with a larger capacity
Shutdown the second VM and remove (not delete) the disk from it
Power on your first VM and the new space should be there and ready to use
Shutdown the virtual machine you want to resize
Log into the ESX Server console via Putty
Type “vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Power on the Virtual Machine and make sure it boots properly, load Disk Management and you will see the new unallocated space
Now to join the unallocated space to the primary partition, first shutdown the Virtual Machine
Connect the Virtual Machine to the System Rescue ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Press Enter at the boot screen
Press Enter after boot sequence is complete and then type ‘startx’
Once X-windows loads, double-click the GpartEd icon (drive icon, 3rd down on the right hand side)
Once the partition editor loads, click on /dev/sda1 in the partition list
Click the Resize/Move button
Click and drag the arrow to extend the size of the partition, make sure you do a resize (double arrow) and not a move (four way arrow) so you should 0 free space preceding and following and then click the Resize/Move button
Next click the Apply button and then the operation will start, you can expand Details to see the progress, once completed click the Close button
Click the power button in the bottom right corner, then select reboot
Edit the VM and remove the ISO from the CD/ROM device (change to Client)
When the server restarts it will do a Check Disk, let this complete, Windows will prompt for a reboot after you login
Reboot and load Disk Management and your Primary Partion will be the new size without any unallocated space
Shutdown the virtual machine you want to resize
Add a second virtual disk of the new smaller desired size to the VM you want to resize
Connect the Virtual Machine to the Knoppix Live CD ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Press Enter at the boot screen
Click on the K Menu icon and then select System and then QTPartEd
Select your original drive (usually sda) and click on the partition 1
Select Operations from the top menu and then Resize, resize the drive so it is just less then the new drives (sdb) capacity
Select File from the top menu and then Commit, click Yes at the warning window
Once complete, select Cancel if you get a unmounted hard disk window and then OK at the Progress window
Open a Konsole window and type “dd if=/dev/sda of=/dev/sdb” This copy will take a long time and will not show a status while it is running. Yyou will get an insufficient space error at the end of the copy, this is normal because the drive you’re copying from is bigger then the destination. But as long as the partition is smaller, everything will work
Shutdown the VM and edit the VM settings, remove the original C: drive and change the SCSI ID of the new drive to match the old one (usually 0:0)
Power on the VM and it will run a Chkdsk and you will be all set
Add a second virtual disk of the new smaller desired size to the VM you want to resize o Use Ghost to clone the first disks partition to your second virtual disk
Once complete make sure the second virtual disk is ‘Active’
Switch your disks by editing the virtual machine settings and switching the SCSI id’s (0:0 and 0:1)
If the virtual machine boots OK and you verify that everything works then shutdown the VM and remove the larger disk and delete it
Refer to https://vsphere-land.com/tips-tricks/re-sizing-virtual-disks
比较全面的Virtual Disks扩展总结
There are several methods to re-sizing virtual disks listed below. If you want to shrink the disk in ESX3 then using VMmware Converter is the best way to do this, you can no longer use vmkfstools to shrink a disk in ESX3, you can also try using QpartEd to shrink a disk. With all these methods you should make a backup copy of your original vmdk file in case something goes wrong. Also make sure you shutdown the OS cleanly before restarting the VM (GpartEd will sometimes fail otherwise). Methods 1, 4 & 5 are essentially the same using Linux boot CD’s and either GpartEd or QpartEd.
You can also check out my articles I wrote on this that use the methods below:
Using VMware Converter to resize virtual disk files (Pt. 1)
Increasing virtual disk partition size using DISKPART or GpartEd (Pt. 2)
Method 1 - Using vmkfstools and GParted to extend a disk
Download the GParted Live CD ISO and make it available so it can be mounted by the virtual machine’s CD-ROMShutdown the virtual machine you want to resize
Log into the ESX Server console via Putty
Type “vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Power on the Virtual Machine and make sure it boots properly, load Disk Management and you will see the new unallocated space
Now to join the unallocated space to the primary partition, first shutdown the Virtual Machine
Connect the Virtual Machine to the GParted ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Gnome Partition Editor will load, press Enter at the boot screen
At the Boot option screen select Manual Video Card and then select Done
Select US English at the Language screen
Select qwerty/us.map at the Keyboard screen
Select Generic VESA Compatiable at the Video Driver screen
Select 8 at the Display Depth screen
Select 1024×768 at the Resolution screen
Once the partition editor loads, click on /dev/sda1 in the partition list
Click the Resize/Move button
Click and drag the arrow to extend the size of the partition, make sure you do a resize (double arrow) and not a move (four way arrow) so you should 0 free space preceding and following and then click the Resize/Move button
Next click the Apply button and then the operation will start, you can expand Details to see the progress, once completed click the Close button
Click the power button in the bottom right corner, then select reboot
Edit the VM and remove the ISO from the CD/ROM device (change to Client)
When the server restarts it will do a Check Disk, let this complete, Windows will prompt for a reboot after you login
Reboot and load Disk Management and your Primary Partion will be the new size without any unallocated space
Method 2 - Using VMware Converter to shrink or extend a disk
When you use Converter to copy a VM it will transfer the data to the destination server by one of two ways. If you do not change the disk size or increase the size of your original disks then it does a block level clone of the drive. If you reduce the size of your original disks it instead does a file level clone of the drive.Download Converter and install it on the VM that you want to resize the drives, reboot after the install completes
Start Converter application, click the Import Machine button
Click Next at the Welcome screen and then Next again at the Source screen
Select ‘Physical Computer’ and click Next o Select “This Local Machine” and click Next
At the Source Data screen select your volumes and change “Maintain Size” to “Type Size in GB” and enter your new disk size and click Next
At the Destination screen click Next
Select “Import this machine to a Vmware ESX Server or VirtualCenter virtual machine” and click Next
At the Destination login screen, select your ESX/VC server and enter the login information and click Next
At the Virtual Machine Name and Folder screen enter a new name for your VM and select a folder and click Next
At the Host or Cluster screen select a host for your destination and click Next
At the Datastore screen, select a datastore and click Next
At the Networks screen, configure your NICs and click Next
At the Customization screen, click Next
Click Finish and the conversion will begin
Once the Conversion is complete, edit the new VM settings and remove any extra hardware that Converter adds (USB/serial/parallel ports, etc.)
Shutdown your original source VM and power on your new destination VM
Make sure everything is functioning properly on the new VM and you can delete the original VM
Method 3 - Using vmkfstools and another Windows virtual machine to extend a disk
Shutdown the virtual machine you want to resizeLog into the ESX Server console via Putty
Type ”vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Shutdown the second helper virtual machine
Edit the settings of the second VM and add the hard disk from the first VM
Power on the second VM and load the Disk Management snap-in and verify that the disk from the first VM has un-allocated space on it
Select Start, Run and enter diskpart.exe
The command ‘list volume’ will show you all volumes.
Select your volume based on the results of the list volume command, ie. ‘select volume 1′
Type the command ‘extend’ to extend the volume
Check the Disk Management snap-in again and the volume should be extended with a larger capacity
Shutdown the second VM and remove (not delete) the disk from it
Power on your first VM and the new space should be there and ready to use
Method 4 - Using vmkfstools and System Rescue CD to extend a disk
Download the System Rescue ISO and make it available so it can be mounted by the virtual machine’s CD-ROMShutdown the virtual machine you want to resize
Log into the ESX Server console via Putty
Type “vmkfstools -X /vmfs/volumes/<volume name>/<VM directory name>/<virtual disk file name>” ie. /vmfs/volumes/Storage1/my_vm.vmdk. New disk size can be specified in kilo, mega or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk from 20GB to 24GB you would specify either 24000m or 24g
Power on the Virtual Machine and make sure it boots properly, load Disk Management and you will see the new unallocated space
Now to join the unallocated space to the primary partition, first shutdown the Virtual Machine
Connect the Virtual Machine to the System Rescue ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Press Enter at the boot screen
Press Enter after boot sequence is complete and then type ‘startx’
Once X-windows loads, double-click the GpartEd icon (drive icon, 3rd down on the right hand side)
Once the partition editor loads, click on /dev/sda1 in the partition list
Click the Resize/Move button
Click and drag the arrow to extend the size of the partition, make sure you do a resize (double arrow) and not a move (four way arrow) so you should 0 free space preceding and following and then click the Resize/Move button
Next click the Apply button and then the operation will start, you can expand Details to see the progress, once completed click the Close button
Click the power button in the bottom right corner, then select reboot
Edit the VM and remove the ISO from the CD/ROM device (change to Client)
When the server restarts it will do a Check Disk, let this complete, Windows will prompt for a reboot after you login
Reboot and load Disk Management and your Primary Partion will be the new size without any unallocated space
Method 5 - Using Knoppix Live CD with QtPartEd to shrink a disk
Download the Knoppix Live CD ISO and make it available so it can be mounted by the virtual machine’s CD-ROMShutdown the virtual machine you want to resize
Add a second virtual disk of the new smaller desired size to the VM you want to resize
Connect the Virtual Machine to the Knoppix Live CD ISO file and make sure you enable Connected at Power On
Power on the Virtual Machine
Press ESC at the Bios screen to get to the Boot Menu
Select CD-ROM as the Boot device
Press Enter at the boot screen
Click on the K Menu icon and then select System and then QTPartEd
Select your original drive (usually sda) and click on the partition 1
Select Operations from the top menu and then Resize, resize the drive so it is just less then the new drives (sdb) capacity
Select File from the top menu and then Commit, click Yes at the warning window
Once complete, select Cancel if you get a unmounted hard disk window and then OK at the Progress window
Open a Konsole window and type “dd if=/dev/sda of=/dev/sdb” This copy will take a long time and will not show a status while it is running. Yyou will get an insufficient space error at the end of the copy, this is normal because the drive you’re copying from is bigger then the destination. But as long as the partition is smaller, everything will work
Shutdown the VM and edit the VM settings, remove the original C: drive and change the SCSI ID of the new drive to match the old one (usually 0:0)
Power on the VM and it will run a Chkdsk and you will be all set
Method 6 - Use Ghost or another 3rd party imaging product to shrink a disk
Shutdown the virtual machine you want to resizeAdd a second virtual disk of the new smaller desired size to the VM you want to resize o Use Ghost to clone the first disks partition to your second virtual disk
Once complete make sure the second virtual disk is ‘Active’
Switch your disks by editing the virtual machine settings and switching the SCSI id’s (0:0 and 0:1)
If the virtual machine boots OK and you verify that everything works then shutdown the VM and remove the larger disk and delete it
Refer to https://vsphere-land.com/tips-tricks/re-sizing-virtual-disks
相关文章推荐
- virtualbox vdi extend the disk usage
- Shrinking Virtual Disks of VMWare
- Virtual Server could not open its emulated Ethernet switch driver. To fix this problem, re-enable the Virtual Server Emulated Et
- 深入研究Windows 7中的Virtual Hard Disk (VHD) 技术
- Steps to Re-Create ASM Diskgroups
- P2V Ubuntu 10.10 to VirtualBox Disk
- The specified virtual disk needs repair.
- Virtual Disk Drivers, UAC and NT
- Virtual Disk "hard disk 3' is not accessible on the host 虚拟机不能启动的解决方法
- Virtual Server could not open its emulated Ethernet switch driver. To fix this problem, re-enable the Virtual Server Emulated Et
- Extended VM Disk In VirtualBox or VMware (虚拟机磁盘扩容)
- How do I add more disk space to a virtual guest using LVM on Red Hat Enterprise Linux?
- 使用VMware Virtual Disk Manager创建共享磁盘
- Steps to Re-Create ASM Diskgroups
- VirtualBox挂载Linux之后,启动报错:Error relaunching VirtualBox VM process: 5
- (Genymotion)Error relaunching VirtualBox VM process:5解决方法
- The parent virtual disk has been modified since the child was created
- Steps to Re-Create ASM Diskgroups
- HOWTO Create a Raw Logical Volume Manager Virtual Disk Infrastructure
- VMWare报错"指定的文件不是虚拟磁盘"或“The file specified is not a virtual disk”