企业IT如何应对“随需应变”的挑战
2010-08-04 11:43
761 查看
现在把我做过的东西转到51cto上,这个便是我在baidu空间上2008年02月26日 星期二 15:13发布的,现在想把这个作为我工作上经验的总结,baidu的作为生活上的点滴记录。。。。不说了,上文章。 今天中午吃完饭就开始弄这个Oracle,上次安装完以后总觉得有隐患,在用SQL develop连接Oracle10g的时候经常提示网卡异常的问题。回忆一下,我想是和我上次安装时候有网卡的选项没通过检验的问题,但是忘记是什么错误,于是趁着系统重做的机会,我又安装一次Oracle10g,错误是Oracle需要设置“Microsoft LoopBack Adapter 配置为系统的主网络适配器”的问题,于是我就手工加了一个,具体方法拿出来和大家分享一下:
控制面板――添加硬件――选择“是的,我已经连接了此硬件”――最后一项“添加新的硬件设备”――“安装我手动从类表选择的硬件”――“网络适配器”――选择厂商为Microsoft的Mircosoft Loopback Adapter――继续下一步然后完成
这时出现一个假的本地连接,不停的在获取IP,其实没用,只是能让racle通过检验(具体为什么我也在找,可是没有满意回答的话贴出来),设置一个固定的ip,哈哈,去监测吧,保证通过!!
/** 这是我的xp的系统,不同的会有区别,但是大同小异,领会精神嘛!!
下面英文的是微软官方的XP下安装Microsoft Loopback adapter的文档,请大家参阅。
引自:http://support.microsoft.com/default.aspx?scid=kb;en-us;839013*\
How to install the Microsoft Loopback adapter in Windows XP
SUMMARYThe Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information. You can also install the Loopback adapter during the unattended installation process.
Back to the top
Manual installation To manually install the Microsoft Loopback adapter in Windows XP, follow these steps: 1. Click Start, and then click Control Panel. 2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane. 3. Double-click Printers and Other Hardware, and then click Next. 4. Under See Also in the left pane, click Add Hardware,and then click Next. 5. Click Yes, I have already connected the hardware, and then click Next. 6. At the bottom of the list, click Add a new hardware device, and then click Next. 7. Click Install the hardware that I manually select from a list, and then click Next. 8. Click Network adapters, and then click Next. 9. In the Manufacturer box, click Microsoft. 10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next. 11. Click Finish. After the adapter is installed successfully, you can manually configure its options, as with any other adapter. If the TCP/IP properties are configured to use DHCP, the adapter will eventually use an autonet address (169.254.x.x/16) because the adapter is not actually connected to any physical media.
Note By default, TCP/IP properties are configured to use DHCP.
本文出自 “小乌龟” 博客,请务必保留此出处http://tinytortoise.blog.51cto.com/72584/108049
控制面板――添加硬件――选择“是的,我已经连接了此硬件”――最后一项“添加新的硬件设备”――“安装我手动从类表选择的硬件”――“网络适配器”――选择厂商为Microsoft的Mircosoft Loopback Adapter――继续下一步然后完成
这时出现一个假的本地连接,不停的在获取IP,其实没用,只是能让racle通过检验(具体为什么我也在找,可是没有满意回答的话贴出来),设置一个固定的ip,哈哈,去监测吧,保证通过!!
/** 这是我的xp的系统,不同的会有区别,但是大同小异,领会精神嘛!!
下面英文的是微软官方的XP下安装Microsoft Loopback adapter的文档,请大家参阅。
引自:http://support.microsoft.com/default.aspx?scid=kb;en-us;839013*\
How to install the Microsoft Loopback adapter in Windows XP
SUMMARYThe Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information. You can also install the Loopback adapter during the unattended installation process.
Back to the top
Manual installation To manually install the Microsoft Loopback adapter in Windows XP, follow these steps: 1. Click Start, and then click Control Panel. 2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane. 3. Double-click Printers and Other Hardware, and then click Next. 4. Under See Also in the left pane, click Add Hardware,and then click Next. 5. Click Yes, I have already connected the hardware, and then click Next. 6. At the bottom of the list, click Add a new hardware device, and then click Next. 7. Click Install the hardware that I manually select from a list, and then click Next. 8. Click Network adapters, and then click Next. 9. In the Manufacturer box, click Microsoft. 10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next. 11. Click Finish. After the adapter is installed successfully, you can manually configure its options, as with any other adapter. If the TCP/IP properties are configured to use DHCP, the adapter will eventually use an autonet address (169.254.x.x/16) because the adapter is not actually connected to any physical media.
Note By default, TCP/IP properties are configured to use DHCP.
本文出自 “小乌龟” 博客,请务必保留此出处http://tinytortoise.blog.51cto.com/72584/108049
相关文章推荐
- SaaS风暴:中国软件企业如何应对挑战?
- 按需扩展的云架构助企业应对IT挑战
- 企业IT边缘化趋势恶化 CIO如何应对
- O2O资本寒冬:互联网企业如何应对一系列高难度挑战
- 【免费公开课】IT企业面试bar越来越高怎么办?如何应对?
- 云计算时代 如何应对企业IT困境
- 公司兼并重组 CIO如何应对IT整合挑战(转)
- 传统企业如何应对互联网挑战
- 企业IT运维人员在变革的云环境下该如何生存?
- IT人如何快速成为心仪企业所需人才?
- 中国如何应对大数据时代的挑战
- 创业者应该如何应对企业低谷期
- 互联网+时代 CIO如何实现企业IT价值转型
- 天下数据详谈企业如何实现优质IT环境
- 传统企业IT架构如何能更好的支撑企业互联网业务的转型
- 企业战略发展:IT战略规划如何做更加务实
- 看IT巨头们如何应对金融危机
- 搭建随需应变的企业信息管理平台——蓝点发布通用管理系统V10版
- Server系列16:浅谈如何利用SBE应对企业灾难恢复
- 如何解决企业IT架构难题