华为AR28-11路由器配置

公司使用华为AR28-11路由器，宽带接入。
现使用2M光纤接入，
地址：124.117.254.* 255.255.255.252.
公司电脑使用192.168.1.0 255.255.255.0 网段地址

参考配置
#
version 5.20, Release 1205P02, Basic
#
sysname H3C
#
domain default enable system
#
vlan 1
#
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
acl number 2000
rule 0 permit
#
interface Aux0
async mode flow
link-protocol ppp
#
interface Ethernet0/0
nat outbound 2000
duplex full
speed 100
ip address 218.22.3.126 255.255.255.252
#
interface Ethernet0/1
port link-mode route
duplex full
speed 100
ip address 192.168.0.1 255.255.255.0
#
interface NULL0
#
ip route-static 0.0.0.0 0.0.0.0 218.22.3.125
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
#
Return

当前路由器提示视图 配置 简单说明
[H3M] acl number 2000
[H3M-acl-basic-2000] rule 0 permit 配置允许进行NAT转换的内网地址段,校园网就一个网段，这里是采用全部允许。你可以只允许某个或某段IP上网
[H3M-Ethernet0/0] interface Ethernet0/0 进入WAN接口，即连接移动专线
[H3M-Ethernet0/0] DESC link-xjmc 备注说明本端口用来连接移动专线
[H3M-Ethernet0/0] nat outbound 2000 在出接口上进行NAT转换
[H3M-Ethernet0/0]duplex full
[H3M-Ethernet0/0]speed 100

设备端口为路由模式、双工模式、速率
[H3M] ip address 218.22. 3.126 255.255.255.252 校园网端地址，为、30位地址。想想移动端地址为多少？如果判断学校与移动端网络是否正常？
[H3M-Ethernet0/1] interface Ethernet0/0 进入LAN接口，即局域网接口，用来连接局域网交换机
[H3M-Ethernet0/1] duplex full
[H3M-Ethernet0/1] speed 100
设备端口为路由模式、双工模式、速率
[H3M-Ethernet0/1] ip address 192.168.0.1 255.255.255.0
内网接口IP，即内网网关
[H3M] ip route-static 0.0.0.0 0.0.0.0 218.22..125
设置默认路由，所有内网上网路由均指向了路由器的下一步：移动端地址