CETK serial test issues and IRDA settings

1.Serial communicaion test can't run, it's because we need full modem COM port to run the test.

2. command line with run serial communication test case with pserial.dll

Option -p Followed by the Port name COMx: to specify the COM port to run against.
Option -g Followed by the Serial Device name.
Option -s Indicating that the device is a slave.
Option -m Indicating that the device is a master.
Option -b Indicating that it is a Blue Tooth Device.
Option -e to run Perf Tests.
Option -t to run Stress Tests.

3.Graphic device performance test can't run, it's resolved by adding feature "Filter and Translation", I think maybe it's Drect Draw contributes to the problem, because "Filter and Translation" depends on "Direct Draw".

4. Sample of IRDA registry setting:

IF SYSGEN_IRDA
[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
; Need to have IrDA stack bind to the miniport.
"Bind"=multi_sz:"Irsir1"

[HKEY_LOCAL_MACHINE\Comm\Irsir]
"DisplayName"="Serial (COM) IrDA Driver"
"Group"="NDIS"
"ImagePath"="irsir.dll"

[HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
"Route"=multi_sz:"Irsir1"

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
; BusNumber and BusType required for NDIS.
"BusNumber"=dword:0
"BusType"=dword:0
; Serial port.
"Port"=dword:2
; 0 = Use external dongle, 1 = Use internal IR
"IntIR"=dword:1
; 0 = Internal transceiver, 1 = Extended Systems JetEye dongle
"TransceiverType"=dword:0
"DisablePowerManagement"=dword:1

ENDIF