您的位置:首页 > 其它

TD-SCDMA系统中的1A-7c事件简介

2010-06-01 16:08 393 查看
事件1A:一个主导频进入报告范围3东oitre432K:JFD()$#_*本文来自移动通信网www.mscbsc.com,版权所有
事件1B:一个主导频信道离开报告范围cvmmvckjlK:JFD()$#本文来自移动通信网www.mscbsc.com,版权所有
事件1C:一个不在Active set 里的主导频信道的导频信号强度超过一个在Active set里的主导频信道的导频信号强度erpoej礙:JFD()本文来自移动通信网www.mscbsc.com,版权所有
事件1D:最好小区发生变化(_@s4faK:JFD()本文来自移动通信网www.mscbsc.com,版权所有
事件1E:一个主导频信道的导频信号强度超过绝对门限值?34321%$#K:JFD()$#_本文来自移动通信网www.mscbsc.com,版权所有
事件1F:一个主导频信道的导频信号强度低于绝对门限值异频测量事件用2X来标识。
事件1G:同频测量。
Event 2a: Change of best frequency. 最优频率的改变 2a事件是指异频测量
2B事件:当前使用使用频率质量低于绝对门限,非使用频率质量高于另一绝对门限。(我)$#@3221aK:JFD()$#_*(本文来自移动通信网www.mscbsc.com,版权所有
2C事件:非使用频率质量高于一个绝对门限 。ouierK:JFD本文来自移动通信网www.mscbsc.com,版权所有
2D事件:当前使用频率质量低于某一绝对门限,用于启动压缩模式。
Event 2e: The estimated quality of a non-used frequency is below a certain thresholds13东oitre4K:JFD()$#_*本文来自移动通信网www.mscbsc.com,版权所有
2F事件:当前使用频率质量高于某一绝对门限,用于停止压缩模式。jlurewioK:JFD()$本文来自移动通信网www.mscbsc.com,版权所有
异系统测量事件用3X标识。fkjhfjoK:JFD()本文来自移动通信网www.mscbsc.com,版权所有
3A事件:当前使用频率质量低于一个绝对门限,而GSM小区质量高于另一个绝对门限 *$#(*)#K:JFD()本文来自移动通信网www.mscbsc.com,版权所有
Event 3b: The estimated quality of other system is below a certain threshold?*@#(_@s4K:JFD()$#_本文来自移动通信网www.mscbsc.com,版权所有
3C事件:GSM小区质量高于一个绝对门限
Event 3d: Change of best cell in other systemvmmvckjK:JFD()本文来自移动通信网www.mscbsc.com,版权所有
话务量测量事件用4X标识。f12zcv545%#(K:JFD()$#_*(本文来自移动通信网www.mscbsc.com,版权所有
Reporting event 4 A: Transport Channel Traffic Volume becomes larger than an absolute threshold
Reporting event 4 B: Transport Channel Traffic Volume becomes smaller than an absolute threshold
质量测量用5X标识(As FDD Mode,It's Measurement of Downlink transport channel BLER)
Reporting event 5A: A predefined number of bad CRCs is exceededjouierpoeK:JFD()$#本文来自移动通信网www.mscbsc.com,版权所有
UE内部测量jhfjouK:JFD(本文来自移动通信网www.mscbsc.com,版权所有
Reporting event 6A: The UE Tx power becomes larger than an absolute threshold1f3dsaK:JFD(本文来自移动通信网www.mscbsc.com,版权所有
Reporting event 6B: The UE Tx power becomes less than an absolute threshold
Reporting event 6C: The UE Tx power reaches its minimum value34321%$#(*K:JFD()$#_本文来自移动通信网www.mscbsc.com,版权所有
Reporting event 6D: The UE Tx power reaches its maximum value?34321K:JFD()本文来自移动通信网www.mscbsc.com,版权所有
Reporting event 6E: The UE RSSI reaches the UE's dynamic receiver range@&%#*(我)$#K:JFD()$#_*本文来自移动通信网www.mscbsc.com,版权所有
6F事件:当UE的下行接收时间和上行发射时间间隔大于绝对门限
6G事件:当UE的下行接收时间和上行发射时间间隔小于绝对门限 oej道h$K:JFD()本文来自移动通信网www.mscbsc.com,版权所有
UE位置测量&#%kcvmmvcK:JFD()$#_本文来自移动通信网www.mscbsc.com,版权所有
Reporting Event 7a: The UE position changes more than an absolute threshold
Reporting Event 7b: SFN-SFN measurement changes more than an absolute threshold%#*(我)K:JFD()本文来自移动通信网www.mscbsc.com,版权所有
Reporting Event 7c: GPS time and SFN time have drifted apart more than an absolute threshold
内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理 点击这里给我发消息
标签: