Hyper-V 配置虚拟网络
2009-12-23 15:31
369 查看
Virtual network types
You can create virtual networks on the server running Hyper-V to define various networking topologies for virtual machines and the virtualization server. Using Virtual Network Manager (accessed from Hyper-V Manager), you have three different types of virtual networks to choose from. External virtual networks. Use this type when you want to allow virtual machines to communicate with externally located servers and the management operating system (sometimes referred to as the parent partition). This type also allows virtual machines on the same physical server to communicate with each other. Internal virtual networks. Use this type when you want to allow communication between virtual machines on the same physical server and virtual machines and the management operating system. An internal virtual network is a virtual network that is not bound to a physical network adapter. It is commonly used to build a test environment where you need to connect to the virtual machines from the management operating system. Private virtual networks. Use this type when you want to allow communication only between virtual machines on the same physical server. A private virtual network is a virtual network without a virtual network adapter in the management operating system. Private virtual networks are commonly used when you want to isolate virtual machines from network traffic in the management operating system and in the external networks.
To allow Hyper-V to use a VLAN Open Hyper-V Manager.
From the Actions menu, click Virtual Network Manager.
Select the virtual network you want to edit, and, in the right pane, check to select Enable virtual LAN identification.
Enter a number for the VLAN ID. All traffic for the management operating system that goes through the network adapter will be tagged with the VLAN ID you set.
To allow a virtual machine to use a VLAN Open Hyper-V Manager.
In the results pane, under Virtual Machines, select the virtual machine that you want to configure to use a VLAN.
In the Action pane, under the virtual machine name, click Settings.
Under Hardware, select the virtual network adapter connected to the external virtual network.
In the right pane, select Enable virtual LAN identification, and then enter the VLAN ID you plan to use.
If you need the virtual machine to communicate using additional VLANs, connect additional network adapters to the appropriate virtual network and assign the VLAN ID. Make sure to configure the IP addresses correctly and that the traffic you want to move across the VLAN is also using the correct IP address.
注意, 如果没有连接到server, 那么在actions menu中是看不到virtual network manager的.
摘自: http://technet.microsoft.com/en-us/library/cc816585(WS.10).aspx
You can create virtual networks on the server running Hyper-V to define various networking topologies for virtual machines and the virtualization server. Using Virtual Network Manager (accessed from Hyper-V Manager), you have three different types of virtual networks to choose from. External virtual networks. Use this type when you want to allow virtual machines to communicate with externally located servers and the management operating system (sometimes referred to as the parent partition). This type also allows virtual machines on the same physical server to communicate with each other. Internal virtual networks. Use this type when you want to allow communication between virtual machines on the same physical server and virtual machines and the management operating system. An internal virtual network is a virtual network that is not bound to a physical network adapter. It is commonly used to build a test environment where you need to connect to the virtual machines from the management operating system. Private virtual networks. Use this type when you want to allow communication only between virtual machines on the same physical server. A private virtual network is a virtual network without a virtual network adapter in the management operating system. Private virtual networks are commonly used when you want to isolate virtual machines from network traffic in the management operating system and in the external networks.
To allow Hyper-V to use a VLAN Open Hyper-V Manager.
From the Actions menu, click Virtual Network Manager.
Select the virtual network you want to edit, and, in the right pane, check to select Enable virtual LAN identification.
Enter a number for the VLAN ID. All traffic for the management operating system that goes through the network adapter will be tagged with the VLAN ID you set.
To allow a virtual machine to use a VLAN Open Hyper-V Manager.
In the results pane, under Virtual Machines, select the virtual machine that you want to configure to use a VLAN.
In the Action pane, under the virtual machine name, click Settings.
Under Hardware, select the virtual network adapter connected to the external virtual network.
In the right pane, select Enable virtual LAN identification, and then enter the VLAN ID you plan to use.
If you need the virtual machine to communicate using additional VLANs, connect additional network adapters to the appropriate virtual network and assign the VLAN ID. Make sure to configure the IP addresses correctly and that the traffic you want to move across the VLAN is also using the correct IP address.
注意, 如果没有连接到server, 那么在actions menu中是看不到virtual network manager的.
摘自: http://technet.microsoft.com/en-us/library/cc816585(WS.10).aspx
相关文章推荐
- server 2008 Hyper-V:虚拟网络配置详解
- Hyper-V应用指南之3-理解并配置Hyper-V虚拟网络[转]
- 图解如何在Windows 8中配置Hyper-v虚拟网络
- hyper-v虚拟网络配置
- 图说:Windows 8 配置Hyper-v虚拟网络
- 虚拟化部署之Hyper-V虚拟网络配置
- win10自带Hyper-v配置虚拟网络
- vmvare 虚拟网络配置
- Hyper-V组件架构——虚拟网络
- hyper-v Centos安装后网络配置及Nginx安装详细过程
- Hyper-v linux 配置网络
- 网络安全系列之四十五 在IIS6中配置虚拟目录
- vmware在桥接模式下配置centos7网络,并使用xshell连接虚拟主机(学习过程篇)
- 配置远程服务器,使hyper-v能够连接网络
- Windows 2008 Hyper-v虚拟机网络配置
- 【php基础班】第16天 网络概述、PHP工作原理、Apache语法检查、Apache配置、虚拟主机
- Windows Azure 配置多个站点的虚拟网络连接
- Hyper - V (二) Hyper - V 配置及网络
- Hyper-V虚拟机ContOS 7 网络配置