outlook 2007无法连接exchange server时的解决方法
2009-11-25 14:33
567 查看
/* from: http://support.microsoft.com/kb/913843 */'
When you try to connect Microsoft Office Outlook 2007 to Microsoft Exchange Server, you may experience any one of the following symptoms:
If your Outlook profile has been automatically configured, you may receive the following error message:
The action cannot be completed. The connection to the Microsoft Exchange Server is unavailable. Your network adapter does not have a default gateway.
If your Outlook profile has been manually configured, you may receive the following error message:
Your Microsoft Exchange Server is unavailable
For example, this error may occur when you have an existing profile that was previously connected to the Exchange Server, and then you lose the setting for your default gateway. In this scenario, if you click Check Name to verify your settings in the E-mail Accounts dialog box, you may receive the following error message:
Outlook cannot log on. Verify that you are connected to the network and are using the proper server and mailbox name. The connection to the Microsoft Exchange Server is unavailable. Your network adapter does not have a default gateway.
When you try to connect Outlook 2007 to Microsoft Exchange Server 2003 by using RPC over HTTPS, you may receive the following error message:
Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The attempt to log on to Microsoft Exchange has failed.
这些问题是由于:This problem may occur if the Outlook 2007 client computer does not have a default gateway configured. 。看字面是因为outlook没有设置默认的网关。
解决方法:
If you cannot configure a default gateway for your network settings, you can work around this problem by adding a DWORD value that is named DefConnectOpts to the following registry subkey:
HKEY_CURRENT_USER/Software/Microsoft/Office/12.0/Outlook/RPC
To add this DWORD value, follow these steps.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate and then click the following subkey:
HKEY_CURRENT_USER/Software/Microsoft/Office/12.0/Outlook/RPC (没有的话,可以自己建一个)
On the Edit menu, point to New, and then click DWORD Value.
Type DefConnectOpts, and then press ENTER.
Right-click DefConnectOpts, and then click Modify.
In the Value data box, type 0, and then click OK.
Exit Registry Editor.
OK,问题解决
When you try to connect Microsoft Office Outlook 2007 to Microsoft Exchange Server, you may experience any one of the following symptoms:
If your Outlook profile has been automatically configured, you may receive the following error message:
The action cannot be completed. The connection to the Microsoft Exchange Server is unavailable. Your network adapter does not have a default gateway.
If your Outlook profile has been manually configured, you may receive the following error message:
Your Microsoft Exchange Server is unavailable
For example, this error may occur when you have an existing profile that was previously connected to the Exchange Server, and then you lose the setting for your default gateway. In this scenario, if you click Check Name to verify your settings in the E-mail Accounts dialog box, you may receive the following error message:
Outlook cannot log on. Verify that you are connected to the network and are using the proper server and mailbox name. The connection to the Microsoft Exchange Server is unavailable. Your network adapter does not have a default gateway.
When you try to connect Outlook 2007 to Microsoft Exchange Server 2003 by using RPC over HTTPS, you may receive the following error message:
Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The attempt to log on to Microsoft Exchange has failed.
这些问题是由于:This problem may occur if the Outlook 2007 client computer does not have a default gateway configured. 。看字面是因为outlook没有设置默认的网关。
解决方法:
If you cannot configure a default gateway for your network settings, you can work around this problem by adding a DWORD value that is named DefConnectOpts to the following registry subkey:
HKEY_CURRENT_USER/Software/Microsoft/Office/12.0/Outlook/RPC
To add this DWORD value, follow these steps.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate and then click the following subkey:
HKEY_CURRENT_USER/Software/Microsoft/Office/12.0/Outlook/RPC (没有的话,可以自己建一个)
On the Edit menu, point to New, and then click DWORD Value.
Type DefConnectOpts, and then press ENTER.
Right-click DefConnectOpts, and then click Modify.
In the Value data box, type 0, and then click OK.
Exit Registry Editor.
OK,问题解决
相关文章推荐
- outlook 2007无法连接exchange server时的解决方法
- 启动 Outlook 2007 时收到错误消息:“无法启动Outlook,无法打开Outlook窗口”解决方法
- outlook pop3连接exchange 2007 无法发信的解决办法
- 卸载Office 2007 Beta2后,Outlook 2003无法启动的解决方法
- 卸载Office 2007 Beta2后,Outlook 2003无法启动的解决方法
- Outlook 2003不能连接Exchange 2007的解决方法
- 解决outlook报错“与Exchange Server的连接不可用,Outlook必须联机或连接才可完成操作”方法汇总
- 关于OUTLOOK 2007邮件无法打印的问题解决方法
- mysql无法远程连接的解决方法
- file_get_contents无法请求https连接的解决方法
- 关于Win7 64位下:Navicat无法连接64位Oracle 11gR2:Cannot load OCI DLL解决方法
- win8无法连接至无线网络的尝试性解决方法
- PostgreSQL使用IP无法连接的解决方法
- Exchange server 2007环境下,outlook2007同步脱机地址簿时出现“0x80190194”错误的分析与解决方法
- SQL server 2008无法连接Local服务器的解决方法
- 远程桌面无法连接解决方法
- “Win7右下角显示无法连接,但可以上网”的解决方法
- SQL2008无法连接到.\SQLEXPRESS,用户'sa'登录失败(错误18456)图文解决方法
- WCF 客户端与服务器时间不同步无法连接的解决方法
- 2个Android蓝牙无法连接的原因和解决方法