基于事件的NIO多线程服务器
2009-11-13 19:49
525 查看
JDK1.4的NIO有效解决了原有流式IO存在的线程开销的问题,在NIO中使用多线程,主要目的已不是为了应对每个客户端请求而分配独立的服务线程,而是通过多线程充分使用用多个CPU的处理能力和处理中的等待时间,达到提高服务能力的目的。
线
程模型
NIO的选择
器采用了多路复用(Multiplexing)技术,可在一个选择器上处理多个套接字,通过获取读写通道来进行IO操作。由于网络带宽等原因,在通道的
读、写操作中是容易出现等待的,所以在读、写操作中引入多线程,对性能提高明显,而且可以提高客户端的感知服务质量。所以本文的模型将主要通过使用读、写
线程池来提高与客户端的数据交换能力。
同时整个服务端的流程处理,建立于事件机制上。在 [接受连接->读->业务处理->写 ->关闭连接 ]这个过程中,触发器将触发相应事件,由事件处理器对相应事件分别响应,完成服务器端的业务处理。
下面我们就来详细看一下这个模型的各个组成部分。
相关事件定义 在这个模型中,我们定义了一些基本的事件:
(1)onAccept:
当服务端收到客户端连接请求时,触发该事件。通过该事件我们可以知道有新的客户端呼入。该事件可用来控制服务端的负载。例如,服务器可设定同时只为一定数量客户端提供服务,当同时请求数超出数量时,可在响应该事件时直接抛出异常,以拒绝新的连接。
(2)onAccepted:
当客户端请求被服务器接受后触发该事件。该事件表明一个新的客户端与服务器正式建立连接。
(3)onRead:
当客户端发来数据,并已被服务器控制线程正确读取时,触发该事件。该事件通知各事件处理器可以对客户端发来的数据进行实际处理了。需要注意的是,在本模型
中,客户端的数据读取是由控制线程交由读线程完成的,事件处理器不需要在该事件中进行专门的读操作,而只需将控制线程传来的数据进行直接处理即可。
(4)onWrite:
当客户端可以开始接受服务端发送数据时触发该事件,通过该事件,我们可以向客户端发送回应数据。在本模型中,事件处理器只需要在该事件中设置 。
(5)onClosed:
当客户端与服务器断开连接时触发该事件。
(6)onError:
当客户端与服务器从连接开始到最后断开连接期间发生错误时触发该事件。通过该事件我们可以知道有什么错误发生。
事件回
调机制的实现
在这个模型中,事件采用广播方式,也就是所有在册的事件处理器都能获得事件通知。这样可以将不同性质的业务处理,分别用不同的处理器实现,使每个处理器的业务功能尽可能单一。
如下图:整个事件模型由监听器、事件适配器、事件触发器、事件处理器组成。
(事件模型)
1.监听器(Serverlistener):
这是一个事件接口,定义需监听的服务器事件,如果您需要定义更多的事件,可在这里进行扩展。
public interface Serverlistener
{
public void onError(String error);
public void onAccept() throws Exception;
public void onAccepted(Request request) throws Exception;
public void onRead(Request request) throws Exception;
public void onWrite(Request request, Response response) throws Exception;
public void onClosed(Request request) throws Exception;
}
2. 事件适配器(EventAdapter):
对Serverlistener接口实现一个适配器(EventAdapter),这样的好处是最终的事件处理器可以只处理所关心的事件。
public abstract class EventAdapter
implements Serverlistener
{
public EventAdapter() {}
public void onError(String error) {}
public void onAccept() throws Exception {}
public void onAccepted(Request request) throws Exception {}
public void onRead(Request request) throws Exception {}
public void onWrite(Request request, Response response) throws Exception {}
public void onClosed(Request request) throws Exception {}
}
3. 事件触发器(Notifier):
用于在适当的时候通过触发服务器事件,通知在册的事件处理器对事件做出响应。触发器以Singleton模式实现,统一控制整个服务器端的事件,避免造成混乱。
public class Notifier
{
private static Arraylist listeners = null;
private static Notifier instance = null;
private Notifier()
{
listeners = new Arraylist();
}
/**
* 获取事件触发器
* @return 返回事件触发器
*/
public static synchronized Notifier
getNotifier()
{
if (instance == null)
{
instance = new Notifier();
return instance;
}
else
{
return instance;
}
}
/**
* 添加事件监听器
* @param l 监听器
*/
public void addlistener(Serverlistener l)
{
synchronized (listeners)
{
if (!listeners.contains(l))
{
listeners.add(l);
}
}
}
public void fireOnAccept()
throws Exception
{
for (int i = listeners.size() - 1;
i >= 0; i--)
{
( (Serverlistener) listeners.
get(i)).onAccept();
}
}
.
// other fire method
}
4. 事件
处
理器(
Handler
):
继
承事件适配器,
对
感
兴
趣的事件
进
行响
应处
理,
实现业务处
理。以下是一个
简单
的事件
处
理器
实现
,它响
应
onRead
事件,在
终
端打印出从客
户
端
读
取的数据。
public class ServerHandler
extends EventAdapter
{
public ServerHandler() {}
public void onRead(Request request)
throws Exception
{
System.out.println("Received: " +
new String(data));
}
}
5. 事件
处
理器的注册。
为
了能
让
事件
处
理器
获
得服
务线
程的事件通知,事件
处
理器需在触
发
器中注册。
ServerHandler handler = new ServerHandler();
Notifier.addlistener(handler);
实现
NIO
多
线
程服
务
器
NIO
多
线
程服
务
器主要由主控服
务线
程、
读线
程和写
线
程
组
成。
1. 主控服
务线
程(
Server
):
主控
线
程将
创
建
读
、写
线
程池,
实现监
听、接受客
户
端
请
求,同
时
将
读
、写通道提交由相
应
的
读线
程(
Reader
)和写服
务线
程
(Writer
),由
读
写
线
程分
别
完成
对
客
户
端数据的
读
取和
对
客
户
端的回
应
操作。
public class Server implements Runnable
{
private static List wpool = new LinkedList();
private static Selector selector;
private ServerSocketChannel sschannel;
private InetSocketAddress address;
protected Notifier notifier;
private int port;
private static int MAX_THREADS = 4;
/**
* Creat the main thread
* @param port server port
* @throws java.lang.Exception
*/
public Server(int port) throws Exception
{
this.port = port;
// event dispatcher
notifier = Notifier.getNotifier();
// create the thread pool for reading and writing
for (int i = 0; i
<
MAX_THREADS
; i++)
{
Thread r
= new
Reader();
Thread w
= new
Writer();
r.start();
w.start();
}
// create nonblocking socket
selector
= Selector.open();
sschannel
= ServerSocketChannel.open();
sschannel.configureBlocking(false);
address
= new
InetSocketAddress(port);
ServerSocket ss
= sschannel.socket();
ss.bind(address);
sschannel.register(selector, SelectionKey.OP_ACCEPT);
}
public void run()
{
System.out.println("Server started
");
System.out.println("Server listening on port: " + port);
while (true)
{
try
{
int num
= 0;
num
= selector.select();
if (num
>
0)
{
Set selectedKeys = selector.selectedKeys();
Iterator it = selectedKeys.iterator();
while (it.hasNext())
{
SelectionKey key = (SelectionKey) it.next();
it.remove();
if ((key.readyOps() & SelectionKey.OP_ACCEPT) == SelectionKey.OP_ACCEPT)
{
// Accept the new connection
ServerSocketChannel ssc =
(ServerSocketChannel) key.channel();
notifier.fireOnAccept();
SocketChannel sc = ssc.accept();
sc.configureBlocking(false);
Request request = new Request(sc);
notifier.fireOnAccepted(request);
sc.register(selector, SelectionKey.OP_READ,request);
}
else if ((key.readyOps() & SelectionKey.OP_READ) == SelectionKey.OP_READ)
{
Reader.processRequest(key);
key.cancel();
}
else if ((key.readyOps() & SelectionKey.OP_WRITE) == SelectionKey.OP_WRITE)
{
Writer.processRequest(key);
key.cancel();
}
}
}
//this selector's wakeup method is invoked
else
{
//register new channel for writing to selector
addRegister();
}
}
catch (Exception e)
{
notifier.fireOnError("Error occured in Server: "
+ e.getMessage());
continue;
}
}
}
private void addRegister()
{
synchronized (wpool)
{
while (!wpool.isEmpty())
{
SelectionKey key = (SelectionKey) wpool.remove(0);
SocketChannel schannel = (SocketChannel) key.channel();
try
{
schannel.register(selector, SelectionKey.OP_WRITE, key
.attachment());
}
catch (Exception e)
{
try
{
schannel.finishConnect();
schannel.close();
schannel.socket().close();
notifier.fireOnClosed((Request) key.attachment());
}
catch (Exception e1)
{
}
notifier.fireOnError("Error occured in addRegister: "
+ e.getMessage());
}
}
}
}
public static void processWriteRequest(SelectionKey key)
{
synchronized (wpool)
{
wpool.add(wpool.size(), key);
wpool.notifyAll();
}
selector.wakeup();
}
}
2. 读线
程(
Reader
):
使用
线
程池技
术
,通
过
多个
线
程
读
取客
户
端数据,以充分利用网
络
数据
传输
的
时间
,提高
读
取效率。
public class Reader extends Thread
{
public void run()
{
while (true)
{
try
{
SelectionKey key;
synchronized (pool)
{
while (pool.isEmpty())
{
pool.wait();
}
key = (SelectionKey) pool.remove(0);
}
// 读取客户端数据,并触发onRead事件
read(key);
}
catch (Exception e)
{
continue;
}
}
}
.
}
3. 写
线
程(
Writer
):
和
读
操作一
样
,使用
线
程池,
负责
将服
务
器端的数据
发
送回客
户
端。
public final class Writer extends Thread
{
public void run()
{
while (true)
{
try
{
SelectionKey key;
synchronized (pool)
{
while (pool.isEmpty())
{
pool.wait();
}
key = (SelectionKey) pool.remove(0);
}
write(key);
}
catch (Exception e)
{
continue;
}
}
}
.
}
具体
应
用
NIO
多
线
程模型的
实现
告一段落,
现
在我
们
可以
暂
且将NIO
的各个API
和
烦琐
的
调
用方法抛于
脑
后,
专
心于我
们
的
实际应
用中。
我
们
用一个
简单
的
TimeServer
(
时间查询
服
务
器)来看看
该
模型能
带
来多
么简洁
的
开发
方式。
在
这
个
TimeServer
中,将提供两
种语
言(中文、英文)的
时间查询
服
务
。我
们
将
读
取客
户
端的
查询
命令(
GB/EN
),并回
应
相
应语
言格式的当前
时间
。在
应
答客
户
的
请
求的同
时
,服
务
器将
进
行日志
记录
。做
为
示例,
对
日志
记录
,我
们
只是
简单
地将客
户
端的
访问时间
和
IP
地址
输
出到服
务
器的
终
端上。
1. 实现时间查询
服
务
的事件
处
理器(
TimeHandler
):
public class TimeHandler extends EventAdapter
{
public TimeHandler() {}
public void onWrite(Request request, Response response) throws Exception
{
String command = new String(request.getDataInput());
String time = null;
Date date = new Date();
if (command.equals("GB"))
{
DateFormat cnDate = DateFormat.getDateTimeInstance(DateFormat.FulL,
DateFormat.FulL, Locale.CHINA);
time = cnDate.format(date);
}
else
{
DateFormat enDate = DateFormat.getDateTimeInstance(DateFormat.FulL,
DateFormat.FulL, Locale.US);
time = enDate.format(date);
}
response.send(time.getBytes());
}
}
2. 实现
日志
记录
服
务
的事件
处
理器(
LogHandler
):
public class LogHandler extends EventAdapter
{
public LogHandler() {}
public void onClosed(Request request)
throws Exception
{
String log = new Date().toString() + " from " + request.getAddress().toString();
System.out.println(log);
}
public void onError(String error)
{
System.out.println("Error: " + error);
}
}
3. 启
动
程序:
public class Start
{
public static void main(String[] args)
{
try
{
LogHandler loger = new LogHandler();
TimeHandler timer = new TimeHandler();
Notifier notifier = Notifier.getNotifier();
notifier.addlistener(loger);
notifier.addlistener(timer);
System.out.println("Server starting
");
Server server = new Server(5100);
Thread tServer = new Thread(server);
tServer.start();
}
catch (Exception e)
{
System.out.println("Server error: " + e.getMessage());
System.exit(-1);
}
}
}
小
结
通
过
例子我
们
可以看到,基于事件回
调
的NIO
多
线
程服
务
器模型,提供了清晰直
观
的
实现
方式,可
让开发
者从NIO
及多
线
程的技
术细节
中
摆
脱出来,集中精力
关
注具体的
业务实现
。
线
程模型
NIO的选择
器采用了多路复用(Multiplexing)技术,可在一个选择器上处理多个套接字,通过获取读写通道来进行IO操作。由于网络带宽等原因,在通道的
读、写操作中是容易出现等待的,所以在读、写操作中引入多线程,对性能提高明显,而且可以提高客户端的感知服务质量。所以本文的模型将主要通过使用读、写
线程池来提高与客户端的数据交换能力。
同时整个服务端的流程处理,建立于事件机制上。在 [接受连接->读->业务处理->写 ->关闭连接 ]这个过程中,触发器将触发相应事件,由事件处理器对相应事件分别响应,完成服务器端的业务处理。
下面我们就来详细看一下这个模型的各个组成部分。
相关事件定义 在这个模型中,我们定义了一些基本的事件:
(1)onAccept:
当服务端收到客户端连接请求时,触发该事件。通过该事件我们可以知道有新的客户端呼入。该事件可用来控制服务端的负载。例如,服务器可设定同时只为一定数量客户端提供服务,当同时请求数超出数量时,可在响应该事件时直接抛出异常,以拒绝新的连接。
(2)onAccepted:
当客户端请求被服务器接受后触发该事件。该事件表明一个新的客户端与服务器正式建立连接。
(3)onRead:
当客户端发来数据,并已被服务器控制线程正确读取时,触发该事件。该事件通知各事件处理器可以对客户端发来的数据进行实际处理了。需要注意的是,在本模型
中,客户端的数据读取是由控制线程交由读线程完成的,事件处理器不需要在该事件中进行专门的读操作,而只需将控制线程传来的数据进行直接处理即可。
(4)onWrite:
当客户端可以开始接受服务端发送数据时触发该事件,通过该事件,我们可以向客户端发送回应数据。在本模型中,事件处理器只需要在该事件中设置 。
(5)onClosed:
当客户端与服务器断开连接时触发该事件。
(6)onError:
当客户端与服务器从连接开始到最后断开连接期间发生错误时触发该事件。通过该事件我们可以知道有什么错误发生。
事件回
调机制的实现
在这个模型中,事件采用广播方式,也就是所有在册的事件处理器都能获得事件通知。这样可以将不同性质的业务处理,分别用不同的处理器实现,使每个处理器的业务功能尽可能单一。
如下图:整个事件模型由监听器、事件适配器、事件触发器、事件处理器组成。
(事件模型)
1.监听器(Serverlistener):
这是一个事件接口,定义需监听的服务器事件,如果您需要定义更多的事件,可在这里进行扩展。
public interface Serverlistener
{
public void onError(String error);
public void onAccept() throws Exception;
public void onAccepted(Request request) throws Exception;
public void onRead(Request request) throws Exception;
public void onWrite(Request request, Response response) throws Exception;
public void onClosed(Request request) throws Exception;
}
2. 事件适配器(EventAdapter):
对Serverlistener接口实现一个适配器(EventAdapter),这样的好处是最终的事件处理器可以只处理所关心的事件。
public abstract class EventAdapter
implements Serverlistener
{
public EventAdapter() {}
public void onError(String error) {}
public void onAccept() throws Exception {}
public void onAccepted(Request request) throws Exception {}
public void onRead(Request request) throws Exception {}
public void onWrite(Request request, Response response) throws Exception {}
public void onClosed(Request request) throws Exception {}
}
3. 事件触发器(Notifier):
用于在适当的时候通过触发服务器事件,通知在册的事件处理器对事件做出响应。触发器以Singleton模式实现,统一控制整个服务器端的事件,避免造成混乱。
public class Notifier
{
private static Arraylist listeners = null;
private static Notifier instance = null;
private Notifier()
{
listeners = new Arraylist();
}
/**
* 获取事件触发器
* @return 返回事件触发器
*/
public static synchronized Notifier
getNotifier()
{
if (instance == null)
{
instance = new Notifier();
return instance;
}
else
{
return instance;
}
}
/**
* 添加事件监听器
* @param l 监听器
*/
public void addlistener(Serverlistener l)
{
synchronized (listeners)
{
if (!listeners.contains(l))
{
listeners.add(l);
}
}
}
public void fireOnAccept()
throws Exception
{
for (int i = listeners.size() - 1;
i >= 0; i--)
{
( (Serverlistener) listeners.
get(i)).onAccept();
}
}
.
// other fire method
}
4. 事件
处
理器(
Handler
):
继
承事件适配器,
对
感
兴
趣的事件
进
行响
应处
理,
实现业务处
理。以下是一个
简单
的事件
处
理器
实现
,它响
应
onRead
事件,在
终
端打印出从客
户
端
读
取的数据。
public class ServerHandler
extends EventAdapter
{
public ServerHandler() {}
public void onRead(Request request)
throws Exception
{
System.out.println("Received: " +
new String(data));
}
}
5. 事件
处
理器的注册。
为
了能
让
事件
处
理器
获
得服
务线
程的事件通知,事件
处
理器需在触
发
器中注册。
ServerHandler handler = new ServerHandler();
Notifier.addlistener(handler);
实现
NIO
多
线
程服
务
器
NIO
多
线
程服
务
器主要由主控服
务线
程、
读线
程和写
线
程
组
成。
1. 主控服
务线
程(
Server
):
主控
线
程将
创
建
读
、写
线
程池,
实现监
听、接受客
户
端
请
求,同
时
将
读
、写通道提交由相
应
的
读线
程(
Reader
)和写服
务线
程
(Writer
),由
读
写
线
程分
别
完成
对
客
户
端数据的
读
取和
对
客
户
端的回
应
操作。
public class Server implements Runnable
{
private static List wpool = new LinkedList();
private static Selector selector;
private ServerSocketChannel sschannel;
private InetSocketAddress address;
protected Notifier notifier;
private int port;
private static int MAX_THREADS = 4;
/**
* Creat the main thread
* @param port server port
* @throws java.lang.Exception
*/
public Server(int port) throws Exception
{
this.port = port;
// event dispatcher
notifier = Notifier.getNotifier();
// create the thread pool for reading and writing
for (int i = 0; i
<
MAX_THREADS
; i++)
{
Thread r
= new
Reader();
Thread w
= new
Writer();
r.start();
w.start();
}
// create nonblocking socket
selector
= Selector.open();
sschannel
= ServerSocketChannel.open();
sschannel.configureBlocking(false);
address
= new
InetSocketAddress(port);
ServerSocket ss
= sschannel.socket();
ss.bind(address);
sschannel.register(selector, SelectionKey.OP_ACCEPT);
}
public void run()
{
System.out.println("Server started
");
System.out.println("Server listening on port: " + port);
while (true)
{
try
{
int num
= 0;
num
= selector.select();
if (num
>
0)
{
Set selectedKeys = selector.selectedKeys();
Iterator it = selectedKeys.iterator();
while (it.hasNext())
{
SelectionKey key = (SelectionKey) it.next();
it.remove();
if ((key.readyOps() & SelectionKey.OP_ACCEPT) == SelectionKey.OP_ACCEPT)
{
// Accept the new connection
ServerSocketChannel ssc =
(ServerSocketChannel) key.channel();
notifier.fireOnAccept();
SocketChannel sc = ssc.accept();
sc.configureBlocking(false);
Request request = new Request(sc);
notifier.fireOnAccepted(request);
sc.register(selector, SelectionKey.OP_READ,request);
}
else if ((key.readyOps() & SelectionKey.OP_READ) == SelectionKey.OP_READ)
{
Reader.processRequest(key);
key.cancel();
}
else if ((key.readyOps() & SelectionKey.OP_WRITE) == SelectionKey.OP_WRITE)
{
Writer.processRequest(key);
key.cancel();
}
}
}
//this selector's wakeup method is invoked
else
{
//register new channel for writing to selector
addRegister();
}
}
catch (Exception e)
{
notifier.fireOnError("Error occured in Server: "
+ e.getMessage());
continue;
}
}
}
private void addRegister()
{
synchronized (wpool)
{
while (!wpool.isEmpty())
{
SelectionKey key = (SelectionKey) wpool.remove(0);
SocketChannel schannel = (SocketChannel) key.channel();
try
{
schannel.register(selector, SelectionKey.OP_WRITE, key
.attachment());
}
catch (Exception e)
{
try
{
schannel.finishConnect();
schannel.close();
schannel.socket().close();
notifier.fireOnClosed((Request) key.attachment());
}
catch (Exception e1)
{
}
notifier.fireOnError("Error occured in addRegister: "
+ e.getMessage());
}
}
}
}
public static void processWriteRequest(SelectionKey key)
{
synchronized (wpool)
{
wpool.add(wpool.size(), key);
wpool.notifyAll();
}
selector.wakeup();
}
}
2. 读线
程(
Reader
):
使用
线
程池技
术
,通
过
多个
线
程
读
取客
户
端数据,以充分利用网
络
数据
传输
的
时间
,提高
读
取效率。
public class Reader extends Thread
{
public void run()
{
while (true)
{
try
{
SelectionKey key;
synchronized (pool)
{
while (pool.isEmpty())
{
pool.wait();
}
key = (SelectionKey) pool.remove(0);
}
// 读取客户端数据,并触发onRead事件
read(key);
}
catch (Exception e)
{
continue;
}
}
}
.
}
3. 写
线
程(
Writer
):
和
读
操作一
样
,使用
线
程池,
负责
将服
务
器端的数据
发
送回客
户
端。
public final class Writer extends Thread
{
public void run()
{
while (true)
{
try
{
SelectionKey key;
synchronized (pool)
{
while (pool.isEmpty())
{
pool.wait();
}
key = (SelectionKey) pool.remove(0);
}
write(key);
}
catch (Exception e)
{
continue;
}
}
}
.
}
具体
应
用
NIO
多
线
程模型的
实现
告一段落,
现
在我
们
可以
暂
且将NIO
的各个API
和
烦琐
的
调
用方法抛于
脑
后,
专
心于我
们
的
实际应
用中。
我
们
用一个
简单
的
TimeServer
(
时间查询
服
务
器)来看看
该
模型能
带
来多
么简洁
的
开发
方式。
在
这
个
TimeServer
中,将提供两
种语
言(中文、英文)的
时间查询
服
务
。我
们
将
读
取客
户
端的
查询
命令(
GB/EN
),并回
应
相
应语
言格式的当前
时间
。在
应
答客
户
的
请
求的同
时
,服
务
器将
进
行日志
记录
。做
为
示例,
对
日志
记录
,我
们
只是
简单
地将客
户
端的
访问时间
和
IP
地址
输
出到服
务
器的
终
端上。
1. 实现时间查询
服
务
的事件
处
理器(
TimeHandler
):
public class TimeHandler extends EventAdapter
{
public TimeHandler() {}
public void onWrite(Request request, Response response) throws Exception
{
String command = new String(request.getDataInput());
String time = null;
Date date = new Date();
if (command.equals("GB"))
{
DateFormat cnDate = DateFormat.getDateTimeInstance(DateFormat.FulL,
DateFormat.FulL, Locale.CHINA);
time = cnDate.format(date);
}
else
{
DateFormat enDate = DateFormat.getDateTimeInstance(DateFormat.FulL,
DateFormat.FulL, Locale.US);
time = enDate.format(date);
}
response.send(time.getBytes());
}
}
2. 实现
日志
记录
服
务
的事件
处
理器(
LogHandler
):
public class LogHandler extends EventAdapter
{
public LogHandler() {}
public void onClosed(Request request)
throws Exception
{
String log = new Date().toString() + " from " + request.getAddress().toString();
System.out.println(log);
}
public void onError(String error)
{
System.out.println("Error: " + error);
}
}
3. 启
动
程序:
public class Start
{
public static void main(String[] args)
{
try
{
LogHandler loger = new LogHandler();
TimeHandler timer = new TimeHandler();
Notifier notifier = Notifier.getNotifier();
notifier.addlistener(loger);
notifier.addlistener(timer);
System.out.println("Server starting
");
Server server = new Server(5100);
Thread tServer = new Thread(server);
tServer.start();
}
catch (Exception e)
{
System.out.println("Server error: " + e.getMessage());
System.exit(-1);
}
}
}
小
结
通
过
例子我
们
可以看到,基于事件回
调
的NIO
多
线
程服
务
器模型,提供了清晰直
观
的
实现
方式,可
让开发
者从NIO
及多
线
程的技
术细节
中
摆
脱出来,集中精力
关
注具体的
业务实现
。
相关文章推荐
- 基于事件的 NIO 多线程服务器
- 基于事件的 NIO 多线程服务器--转载
- 基于事件的NIO多线程服务器
- 【转】基于事件的NIO多线程服务器
- 基于事件的 NIO 多线程服务器
- 基于事件的 NIO 多线程服务器
- 基于事件的NIO多线程服务器
- 基于事件的NIO多线程服务器
- 基于事件的NIO多线程服务器(转)
- 基于事件的 NIO 多线程服务器--转载
- 基于事件的NIO多线程服务器
- Java NIO学习(三)Selector监听事件+NIO服务器实例
- 基于TCP协议的多线程服务器
- 基于非阻塞socket的多线程服务器的实现------一个服务器如何与多个客户端进行通信?
- 基于TCP的多进程和多线程服务器
- Linux C: 基于C/S的多线程网络编程 (服务器充当一个客户端的两点传输)
- 基于tcp的小型服务器(多线程多进程)
- C#基于事件驱动的多串口多线程串口通讯软件架构设计
- 基于socket的Linux上的网络聊天程序--多线程的服务器
- lesson6 基于多线程的tcp并发服务器