Linux下增加磁盘设备的处理记录
2009-10-31 23:22
295 查看
--首先看看有哪些磁盘
[root@localhost ~]# fdisk -l
--要处理的是sdj,使用fdisk分区
[root@localhost ~]# fdisk /dev/sdj
The number of cylinders for this disk is set to 13054.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help):n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-13054, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-13054, default 13054):
Using default value 13054
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Command (m for help):q
--这之间使用了n创建分区,p是主分区,最重要的是w,写入磁盘,不写的话,前面工作白费
--下面是使用ext3格式格式化sdj1
[root@localhost ~]# mkfs.ext3 /dev/sdj1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
13107200 inodes, 26214055 blocks
1310702 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
800 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
--格式化完毕,查看一下列表
[root@localhost ~]#fdisk -l
Disk /dev/sdj: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdj1 1 13054 104856223+ 83 Linux
--终于有磁盘了
--创建挂载点
[root@localhost ~]# mkdir /hdsdj
--挂载磁盘上去
[root@localhost ~]# mount /dev/sdj1 /hdsdj
--验证下效果
[root@localhost ~]# cd /
[root@localhost /]# ls
bin boot dev etc hdsdj hdsdn hdsdo home lib lib64 lost+found media misc mnt opt proc root sbin selinux srv sys tmp usr var
--重启后就消失,写入磁盘记录
[root@localhost /]# vi /etc/fstab
--重启验证一下
[root@localhost /]#reboot
[root@localhost ~]# fdisk -l
--要处理的是sdj,使用fdisk分区
[root@localhost ~]# fdisk /dev/sdj
The number of cylinders for this disk is set to 13054.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help):n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-13054, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-13054, default 13054):
Using default value 13054
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Command (m for help):q
--这之间使用了n创建分区,p是主分区,最重要的是w,写入磁盘,不写的话,前面工作白费
--下面是使用ext3格式格式化sdj1
[root@localhost ~]# mkfs.ext3 /dev/sdj1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
13107200 inodes, 26214055 blocks
1310702 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
800 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
--格式化完毕,查看一下列表
[root@localhost ~]#fdisk -l
Disk /dev/sdj: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdj1 1 13054 104856223+ 83 Linux
--终于有磁盘了
--创建挂载点
[root@localhost ~]# mkdir /hdsdj
--挂载磁盘上去
[root@localhost ~]# mount /dev/sdj1 /hdsdj
--验证下效果
[root@localhost ~]# cd /
[root@localhost /]# ls
bin boot dev etc hdsdj hdsdn hdsdo home lib lib64 lost+found media misc mnt opt proc root sbin selinux srv sys tmp usr var
--重启后就消失,写入磁盘记录
[root@localhost /]# vi /etc/fstab
--重启验证一下
[root@localhost /]#reboot
相关文章推荐
- Linux 系统磁盘满处理方法
- 增加VMware下LINUX的虚拟机磁盘空间
- Linux 下的 hid dev 设备编程处理
- Linux学习(十四)磁盘格式化、磁盘挂载、手动增加swap空间
- linux学习第十五篇:磁盘格式化,磁盘挂载,手动增加swap空间
- linux磁盘、分区、设备简单介绍
- Linux磁盘空间短时间被未知资源大量占用情况处理
- Linux磁盘设备名变了
- Linux中VMware虚拟机增加磁盘空间的扩容操作
- 虚拟机 vmware 增加磁盘 (linux)
- Linux下磁盘设备文件(sda,sdb,sdc….)变化的问题
- 删除文件后,磁盘空间没有释放的处理记录
- MYSQL共享磁盘集群之LINUX下共享磁盘的处理
- Linux设备驱动编程中断处理
- linux故障处理:磁盘资源耗尽故障
- LINUX+10.2.0.3 RAC删除、增加节点所遇问题记录
- 已知 apache 服务的访问日志按天记录在服务器本地目录/app/logs 下,由于磁盘空间紧张,现在要求只能保留最近 7 天的访问日志!请问如何解决? 请给出解决办法或配置或处理命令。(提示:可以
- 如何解决 Linux 虚拟机磁盘设备名不一致的问题
- Linux 挂载iscsi存储磁盘设备
- 【Linux操作系统分析】设备驱动处理流程