C# 海康DVR客户端开发系列（2）—— 封装API
2009-10-24 11:55
801 查看
前言
从上篇文章（10月4日）到本篇文章截止到今天（10月22日）一直在做这个SDK翻译工作，耗时2周半，代码超过1万行，约有三分之二的行数是注释。由于工作忙也只能一天抽出那么半个小时一个小时来整理，所以对关注此系列文章的朋友说句：“抱歉，让大家久等了”。
临时决定本系列使用WPF来做例子(买了一本WPF没读 - - #，所以......)，藉此学习下WPF，也进一步熟悉.Net Framework 3.5，落伍的“老兵”奋起追击下相对于“老兵”而言的新技术 :)
其实这篇文章在10月22日就写好了，但是想和视频预览文章一起发布，比较麻烦的是我这边朋友的DVR一直不稳定，一直拖延到今天还是不行，所以还是把本文先发了。因此寻求能提供DVR设备的厂家或者提供DVR远程访问地址的朋友，以支持此系列能顺利的完成，在这里先谢谢了！我的联系方式：13811821337、over140@gmail.com
提醒
欢迎转载，但请保留博客园(www.cnblogs.com)、农民伯伯(over140.cnblogs.com)的出处，谢谢合作:)
系列
1. C# 海康DVR客户端开发系列（1）——准备
2. C# 海康DVR客户端开发系列（2）—— 封装API
更新
本文会随着后续实践文章有相应的改动，请及时更新！
2010-12-21 HCNetSDK2010-12-21.rar
主要更新了SerialDataCallBack委托的pRecvDataBuffer参数数据类型，由string改为byte[]，这里感谢badnewfish实践后指出，欢迎大家积极反馈！
2009-10-31 HCNetSDK2009-10-31.rar
主要更新了大部分结构体中byte[]初始大小指定，加上了[MarshalAs(UnmanagedType.ByValArray, SizeConst = HCNetSDK.SERIALNO_LEN)]类似的标记。
2009-10-24 HCNetSDK.cs
正文
一、代码截图
VS
二、 部分代码
由于代码过长（超过1W行），这里就不贴全部了，大家直接在更新下面下载最新的SDK即可。
/// 设置码流速度
/// </summary>
public const int NET_DVR_SETSPEED = 24;
/// <summary>
/// 保持与设备的心跳(如果回调阻塞，建议2秒发送一次)
/// </summary>
public const int NET_DVR_KEEPALIVE = 25;
//远程按键定义如下：
/* key value send to CONFIG program */
public const int KEY_CODE_1 = 1;
public const int KEY_CODE_2 = 2;
public const int KEY_CODE_3 = 3;
public const int KEY_CODE_4 = 4;
public const int KEY_CODE_5 = 5;
public const int KEY_CODE_6 = 6;
public const int KEY_CODE_7 = 7;
public const int KEY_CODE_8 = 8;
public const int KEY_CODE_9 = 9;
public const int KEY_CODE_0 = 10;
public const int KEY_CODE_POWER = 11;
public const int KEY_CODE_MENU = 12;
public const int KEY_CODE_ENTER = 13;
public const int KEY_CODE_CANCEL = 14;
public const int KEY_CODE_UP = 15;
public const int KEY_CODE_DOWN = 16;
public const int KEY_CODE_LEFT = 17;
public const int KEY_CODE_RIGHT = 18;
public const int KEY_CODE_EDIT = 19;
public const int KEY_CODE_ADD = 20;
public const int KEY_CODE_MINUS = 21;
public const int KEY_CODE_PLAY = 22;
public const int KEY_CODE_REC = 23;
public const int KEY_CODE_PAN = 24;
public const int KEY_CODE_M = 25;
public const int KEY_CODE_A = 26;
public const int KEY_CODE_F1 = 27;
public const int KEY_CODE_F2 = 28;
/* for PTZ control */
public const int KEY_PTZ_UP_START = KEY_CODE_UP;
public const int KEY_PTZ_UP_STOP = 32;
public const int KEY_PTZ_DOWN_START = KEY_CODE_DOWN;
public const int KEY_PTZ_DOWN_STOP = 33;
public const int KEY_PTZ_LEFT_START = KEY_CODE_LEFT;
public const int KEY_PTZ_LEFT_STOP = 34;
public const int KEY_PTZ_RIGHT_START = KEY_CODE_RIGHT;
public const int KEY_PTZ_RIGHT_STOP = 35;
/// <summary>
/// 光圈+
/// </summary>
public const int KEY_PTZ_AP1_START = KEY_CODE_EDIT; /* 光圈+ */
public const int KEY_PTZ_AP1_STOP = 36;
/// <summary>
/// 光圈-
/// </summary>
public const int KEY_PTZ_AP2_START = KEY_CODE_PAN; /* 光圈- */
public const int KEY_PTZ_AP2_STOP = 37;
/// <summary>
/// 聚焦+
/// </summary>
public const int KEY_PTZ_FOCUS1_START = KEY_CODE_A; /* 聚焦+ */
public const int KEY_PTZ_FOCUS1_STOP = 38;
/// <summary>
/// 聚焦-
/// </summary>
public const int KEY_PTZ_FOCUS2_START = KEY_CODE_M;/* 聚焦- */
public const int KEY_PTZ_FOCUS2_STOP = 39;
/// <summary>
/// 变倍+
/// </summary>
public const int KEY_PTZ_B1_START = 40; /* 变倍+ */
public const int KEY_PTZ_B1_STOP = 41;
/// <summary>
/// 变倍-
/// </summary>
public const int KEY_PTZ_B2_START = 42; /* 变倍- */
public const int KEY_PTZ_B2_STOP = 43;
//9000新增
public const int KEY_CODE_11 = 44;
public const int KEY_CODE_12 = 45;
public const int KEY_CODE_13 = 46;
public const int KEY_CODE_14 = 47;
public const int KEY_CODE_15 = 48;
public const int KEY_CODE_16 = 49;
/// <summary>
/// 获取网络应用参数 EMAIL
/// </summary>
public const int NET_DVR_GET_EMAILCFG = 228;//
/// <summary>
/// 设置网络应用参数 EMAIL
/// </summary>
public const int NET_DVR_SET_EMAILCFG = 229; //
//对应NET_DVR_EMAILCFG结构
//
public const int NET_DVR_GET_ALLHDCFG = 300; //
#region DS9000新增命令(_V30)
//设备编码类型配置(NET_DVR_COMPRESSION_AUDIO结构)
/// <summary>
/// 获取设备语音对讲编码参数
/// </summary>
public const int NET_DVR_GET_COMPRESSCFG_AUD = 1058; //
/// <summary>
/// 设置设备语音对讲编码参数
/// </summary>
public const int NET_DVR_SET_COMPRESSCFG_AUD = 1059; //
#endregion
/// <summary>
/// 预览异常
/// </summary>
public const int NET_DVR_REALPLAYEXCEPTION = 111;//
/// <summary>
/// 预览时连接断开
/// </summary>
public const int NET_DVR_REALPLAYNETCLOSE = 112;//
/// <summary>
/// 预览5s没有收到数据
/// </summary>
public const int NET_DVR_REALPLAY5SNODATA = 113; //
/// <summary>
/// 预览重连
/// </summary>
public const int NET_DVR_REALPLAYRECONNECT = 114; //
/// <summary>
/// 回放数据播放完毕
/// </summary>
public const int NET_DVR_PLAYBACKOVER = 101;//
/// <summary>
/// 回放异常
/// </summary>
public const int NET_DVR_PLAYBACKEXCEPTION = 102;//
/// <summary>
/// 回放时候连接断开
/// </summary>
public const int NET_DVR_PLAYBACKNETCLOSE = 103;//
/// <summary>
/// 回放5s没有收到数据
/// </summary>
public const int NET_DVR_PLAYBACK5SNODATA = 104;
#region DS-6001D/F
/// <summary>
/// DS-6001D Decoder
/// NET_DVR_DECODERINFO, *LPNET_DVR_DECODERINFO;
/// </summary>
public struct NET_DVR_DECODERINFO
{
/// <summary>
/// 解码设备连接的服务器IP
/// public byte byEncoderIP[16];
/// </summary>
public byte[] byEncoderIP;
/// <summary>
/// 解码设备连接的服务器的用户名
/// public byte byEncoderUser[16];
/// </summary>
public byte[] byEncoderUser;
/// <summary>
/// 解码设备连接的服务器的密码
/// public byte byEncoderPasswd[16];
/// </summary>
public byte[] byEncoderPasswd;
/// <summary>
/// 解码设备连接服务器的连接模式
/// </summary>
public byte bySendMode;
/// <summary>
/// 解码设备连接的服务器的通道号
/// </summary>
public byte byEncoderChannel;
/// <summary>
/// 解码设备连接的服务器的端口号
/// </summary>
public ushort wEncoderPort;
/// <summary>
/// 保留
/// public byte reservedData[4];
/// </summary>
public byte[] reservedData;
}
/// <summary>
/// NET_DVR_DECODERSTATE, *LPNET_DVR_DECODERSTATE;
/// </summary>
public struct NET_DVR_DECODERSTATE
{
/// <summary>
/// 解码设备连接的服务器IP
/// public byte byEncoderIP[16];
/// </summary>
public byte[] byEncoderIP;
/// <summary>
/// 解码设备连接的服务器的用户名
/// public byte byEncoderUser[16];
/// </summary>
public byte[] byEncoderUser;
/// <summary>
/// 解码设备连接的服务器的密码
/// public byte byEncoderPasswd[16];
/// </summary>
public byte[] byEncoderPasswd;
/// <summary>
/// 解码设备连接的服务器的通道号
/// </summary>
public byte byEncoderChannel;
/// <summary>
/// 解码设备连接的服务器的连接模式
/// </summary>
public byte bySendMode;
/// <summary>
/// 解码设备连接的服务器的端口号
/// </summary>
public ushort wEncoderPort;
/// <summary>
/// 解码设备连接服务器的状态
/// </summary>
public uint dwConnectState;
/// <summary>
/// 保留
/// public byte reservedData[4];
/// </summary>
public byte[] reservedData;
}
#region 解码设备控制码定义
public const int NET_DEC_STARTDEC = 1;
public const int NET_DEC_STOPDEC = 2;
public const int NET_DEC_STOPCYCLE = 3;
public const int NET_DEC_CONTINUECYCLE = 4;
#endregion
#endregion
/// <summary>
/// Email
/// NET_DVR_EMAILPARA, *LPNET_DVR_EMAILPARA;
/// </summary>
public struct NET_DVR_EMAILPARA
{
/// <summary>
/// 邮件账号
/// public byte sUsername[64];
/// </summary>
public string sUsername;
/// <summary>
/// 邮件密码
/// public byte sPassword[64];
/// </summary>
public string sPassword;
/// <summary>
/// public byte sSmtpServer[64];
/// </summary>
public string sSmtpServer;
/// <summary>
/// public byte sPop3Server[64];
/// </summary>
public string sPop3Server;
/// <summary>
/// 邮件地址
/// public byte sMailAddr[64];
/// </summary>
public string sMailAddr;
/// <summary>
/// 上传报警/异常等的email
/// public byte sEventMailAddr1[64];
/// </summary>
public byte[] sEventMailAddr1;
/// <summary>
/// public byte sEventMailAddr2[64];
/// </summary>
public byte[] sEventMailAddr2;
/// <summary>
/// public byte res[16];
/// </summary>
public byte[] res;
}
/// <summary>
/// NET_DVR_NETCFG_OTHER, *LPNET_DVR_NETCFG_OTHER;
/// </summary>
public struct NET_DVR_NETCFG_OTHER
{
public uint dwSize;
/// <summary>
/// char sFirstDNSIP[16];
/// </summary>
public string sFirstDNSIP;
/// <summary>
/// char sSecondDNSIP[16];
/// </summary>
public string sSecondDNSIP;
/// <summary>
/// char sRes[32];
/// </summary>
public string sRes;
}
/// <summary>
/// 连接的通道配置 2007-11-05
/// NET_DVR_MATRIX_DECCHANINFO, *LPNET_DVR_MATRIX_DECCHANINFO;
/// </summary>
public struct NET_DVR_MATRIX_DECCHANINFO
{
/// <summary>
/// 是否启用 0－否 1－启用
/// </summary>
public uint dwEnable;
/// <summary>
/// 轮循解码通道信息
/// </summary>
public NET_DVR_MATRIX_DECINFO struDecChanInfo;
}
/// <summary>
/// 压缩参数?
/// NET_DVR_COMPRESSIONCFG_NEW, *LPNET_DVR_COMPRESSIONCFG_NEW;
/// </summary>
public struct NET_DVR_COMPRESSIONCFG_NEW
{
public uint dwSize;
/// <summary>
/// 定时录像
/// </summary>
public NET_DVR_COMPRESSION_INFO_EX struLowCompression;
/// <summary>
/// 事件触发录像
/// </summary>
public NET_DVR_COMPRESSION_INFO_EX struEventCompression;
}
/// <summary>
/// 抓图模式
/// </summary>
public enum CAPTURE_MODE
{
/// <summary>
/// BMP模式
/// </summary>
BMP_MODE = 0, //
/// <summary>
/// JPEG模式
/// </summary>
JPEG_MODE = 1 //
}
/// <summary>
/// 实时声音模式
/// </summary>
public enum REALSOUND_MODE
{
/// <summary>
/// 独占模式
/// </summary>
MONOPOLIZE_MODE = 1,
/// <summary>
/// 共享模式
/// </summary>
SHARE_MODE = 2
}
/// <summary>
/// 录象文件参数(带卡号)
/// NET_DVR_FINDDATA_CARD, *LPNET_DVR_FINDDATA_CARD;
/// </summary>
public struct NET_DVR_FINDDATA_CARD
{
/// <summary>
/// 文件名
/// char sFileName[100];
/// </summary>
public string sFileName;
/// <summary>
/// 文件的开始时间
/// </summary>
public NET_DVR_TIME struStartTime;
/// <summary>
/// 文件的结束时间
/// </summary>
public NET_DVR_TIME struStopTime;
/// <summary>
/// 文件的大小
/// </summary>
public uint dwFileSize;
/// <summary>
/// 卡号?
/// char sCardNum[32];
/// </summary>
public char sCardNum;
}
/// <summary>
/// 设置重新连接间隔
/// NET_DVR_API BOOL __stdcall NET_DVR_SetReconnect(DWORD dwInterval = 30000, BOOL bEnableRecon = TRUE);
/// </summary>
/// <param name="dwInterval"></param>
/// <param name="bEnableRecon"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SetReconnect(uint dwInterval, bool bEnableRecon);
/// <summary>
/// 通过IPSever获取设备动态IP地址[Ex]
/// NET_DVR_API BOOL __stdcall NET_DVR_GetDVRIPByResolveSvr_EX(char *sServerIP, WORD wServerPort, unsigned char *sDVRName, WORD wDVRNameLen, BYTE *sDVRSerialNumber, WORD wDVRSerialLen, char* sGetIP, DWORD *dwPort);
/// </summary>
/// <param name="sServerIP"></param>
/// <param name="wServerPort"></param>
/// <param name="sDVRName"></param>
/// <param name="wDVRNameLen"></param>
/// <param name="sDVRSerialNumber"></param>
/// <param name="wDVRSerialLen"></param>
/// <param name="sGetIP"></param>
/// <param name="dwPort"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetDVRIPByResolveSvr_EX(string sServerIP, ushort wServerPort, string sDVRName, ushort wDVRNameLen, string sDVRSerialNumber, ushort wDVRSerialLen, StringBuilder sGetIP, ref uint dwPort);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZControlWithSpeed_EX(LONG lRealHandle, DWORD dwPTZCommand, DWORD dwStop, DWORD dwSpeed);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZCommand"></param>
/// <param name="dwStop"></param>
/// <param name="dwSpeed"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZControlWithSpeed_EX(int lRealHandle, uint dwPTZCommand, uint dwStop, uint dwSpeed);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack(LONG lRealHandle,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack(int lRealHandle, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack_Other(LONG lUserID,LONG lChannel,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack_Other(int lUserID, int lChannel, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack_EX(LONG lRealHandle,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack_EX(int lRealHandle, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API LONG __stdcall NET_DVR_FindNextFile_Card(LONG lFindHandle, LPNET_DVR_FINDDATA_CARD lpFindData);
/// </summary>
/// <param name="lFindHandle"></param>
/// <param name="lpFindData"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_FindNextFile_Card(int lFindHandle, NET_DVR_FINDDATA_CARD lpFindData);
/// <summary>
/// NET_DVR_API LONG __stdcall NET_DVR_FindFile_Card(LONG lUserID, LONG lChannel, DWORD dwFileType, LPNET_DVR_TIME lpStartTime, LPNET_DVR_TIME lpStopTime);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwFileType"></param>
/// <param name="lpStartTime"></param>
/// <param name="lpStopTime"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_FindFile_Card(int lUserID, int lChannel, uint dwFileType, NET_DVR_TIME lpStartTime, NET_DVR_TIME lpStopTime);
/// <summary>
/// NET_DVR_API int __stdcall NET_DVR_GetPlayBackPos(LONG lPlayHandle);
/// </summary>
/// <param name="lPlayHandle"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_GetPlayBackPos(int lPlayHandle);
//解码设备DS-6001D/DS-6001F
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_StartDecode(LONG lUserID, LONG lChannel, LPNET_DVR_DECODERINFO lpDecoderinfo);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="lpDecoderinfo"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_StartDecode(int lUserID, int lChannel, NET_DVR_DECODERINFO lpDecoderinfo);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_StopDecode(LONG lUserID, LONG lChannel);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_StopDecode(int lUserID, int lChannel);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_GetDecoderState(LONG lUserID, LONG lChannel, LPNET_DVR_DECODERSTATE lpDecoderState);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="lpDecoderState"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetDecoderState(int lUserID, int lChannel, NET_DVR_DECODERSTATE lpDecoderState);
/// <summary>
/// 保存参数
/// NET_DVR_API BOOL __stdcall NET_DVR_SaveConfig(LONG lUserID);
/// </summary>
/// <param name="lUserID"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SaveConfig(int lUserID);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_SetVideoEffect(LONG lUserID, LONG lChannel, DWORD dwBrightValue, DWORD dwContrastValue, DWORD dwSaturationValue, DWORD dwHueValue);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwBrightValue"></param>
/// <param name="dwContrastValue"></param>
/// <param name="dwSaturationValue"></param>
/// <param name="dwHueValue"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SetVideoEffect(int lUserID, int lChannel, uint dwBrightValue, uint dwContrastValue, uint dwSaturationValue, uint dwHueValue);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_GetVideoEffect(LONG lUserID, LONG lChannel, DWORD *pBrightValue, DWORD *pContrastValue, DWORD *pSaturationValue, DWORD *pHueValue);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="pBrightValue"></param>
/// <param name="pContrastValue"></param>
/// <param name="pSaturationValue"></param>
/// <param name="pHueValue"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetVideoEffect(int lUserID, int lChannel, out uint pBrightValue, out uint pContrastValue, out uint pSaturationValue, out uint pHueValue); 三、下章预告
实现最基本的连接服务器并预览图像的功能。
结束语
首先我必须强调本章的翻译是一个体力活！本章可能会再随后的文章不断的更新，主要是数据类型对应可能有问题，这里也是凭经验来进行对应了，也欢迎有朋友尽早的向我提交勘误，我好及时的更新文章。
从上篇文章（10月4日）到本篇文章截止到今天（10月22日）一直在做这个SDK翻译工作，耗时2周半，代码超过1万行，约有三分之二的行数是注释。由于工作忙也只能一天抽出那么半个小时一个小时来整理，所以对关注此系列文章的朋友说句：“抱歉，让大家久等了”。
临时决定本系列使用WPF来做例子(买了一本WPF没读 - - #，所以......)，藉此学习下WPF，也进一步熟悉.Net Framework 3.5，落伍的“老兵”奋起追击下相对于“老兵”而言的新技术 :)
其实这篇文章在10月22日就写好了，但是想和视频预览文章一起发布，比较麻烦的是我这边朋友的DVR一直不稳定，一直拖延到今天还是不行，所以还是把本文先发了。因此寻求能提供DVR设备的厂家或者提供DVR远程访问地址的朋友，以支持此系列能顺利的完成，在这里先谢谢了！我的联系方式：13811821337、over140@gmail.com
提醒
欢迎转载，但请保留博客园(www.cnblogs.com)、农民伯伯(over140.cnblogs.com)的出处，谢谢合作:)
系列
1. C# 海康DVR客户端开发系列（1）——准备
2. C# 海康DVR客户端开发系列（2）—— 封装API
更新
本文会随着后续实践文章有相应的改动，请及时更新！
2010-12-21 HCNetSDK2010-12-21.rar
主要更新了SerialDataCallBack委托的pRecvDataBuffer参数数据类型，由string改为byte[]，这里感谢badnewfish实践后指出，欢迎大家积极反馈！
2009-10-31 HCNetSDK2009-10-31.rar
主要更新了大部分结构体中byte[]初始大小指定，加上了[MarshalAs(UnmanagedType.ByValArray, SizeConst = HCNetSDK.SERIALNO_LEN)]类似的标记。
2009-10-24 HCNetSDK.cs
正文
一、代码截图
VS
二、 部分代码
由于代码过长（超过1W行），这里就不贴全部了，大家直接在更新下面下载最新的SDK即可。
/// 设置码流速度
/// </summary>
public const int NET_DVR_SETSPEED = 24;
/// <summary>
/// 保持与设备的心跳(如果回调阻塞，建议2秒发送一次)
/// </summary>
public const int NET_DVR_KEEPALIVE = 25;
//远程按键定义如下：
/* key value send to CONFIG program */
public const int KEY_CODE_1 = 1;
public const int KEY_CODE_2 = 2;
public const int KEY_CODE_3 = 3;
public const int KEY_CODE_4 = 4;
public const int KEY_CODE_5 = 5;
public const int KEY_CODE_6 = 6;
public const int KEY_CODE_7 = 7;
public const int KEY_CODE_8 = 8;
public const int KEY_CODE_9 = 9;
public const int KEY_CODE_0 = 10;
public const int KEY_CODE_POWER = 11;
public const int KEY_CODE_MENU = 12;
public const int KEY_CODE_ENTER = 13;
public const int KEY_CODE_CANCEL = 14;
public const int KEY_CODE_UP = 15;
public const int KEY_CODE_DOWN = 16;
public const int KEY_CODE_LEFT = 17;
public const int KEY_CODE_RIGHT = 18;
public const int KEY_CODE_EDIT = 19;
public const int KEY_CODE_ADD = 20;
public const int KEY_CODE_MINUS = 21;
public const int KEY_CODE_PLAY = 22;
public const int KEY_CODE_REC = 23;
public const int KEY_CODE_PAN = 24;
public const int KEY_CODE_M = 25;
public const int KEY_CODE_A = 26;
public const int KEY_CODE_F1 = 27;
public const int KEY_CODE_F2 = 28;
/* for PTZ control */
public const int KEY_PTZ_UP_START = KEY_CODE_UP;
public const int KEY_PTZ_UP_STOP = 32;
public const int KEY_PTZ_DOWN_START = KEY_CODE_DOWN;
public const int KEY_PTZ_DOWN_STOP = 33;
public const int KEY_PTZ_LEFT_START = KEY_CODE_LEFT;
public const int KEY_PTZ_LEFT_STOP = 34;
public const int KEY_PTZ_RIGHT_START = KEY_CODE_RIGHT;
public const int KEY_PTZ_RIGHT_STOP = 35;
/// <summary>
/// 光圈+
/// </summary>
public const int KEY_PTZ_AP1_START = KEY_CODE_EDIT; /* 光圈+ */
public const int KEY_PTZ_AP1_STOP = 36;
/// <summary>
/// 光圈-
/// </summary>
public const int KEY_PTZ_AP2_START = KEY_CODE_PAN; /* 光圈- */
public const int KEY_PTZ_AP2_STOP = 37;
/// <summary>
/// 聚焦+
/// </summary>
public const int KEY_PTZ_FOCUS1_START = KEY_CODE_A; /* 聚焦+ */
public const int KEY_PTZ_FOCUS1_STOP = 38;
/// <summary>
/// 聚焦-
/// </summary>
public const int KEY_PTZ_FOCUS2_START = KEY_CODE_M;/* 聚焦- */
public const int KEY_PTZ_FOCUS2_STOP = 39;
/// <summary>
/// 变倍+
/// </summary>
public const int KEY_PTZ_B1_START = 40; /* 变倍+ */
public const int KEY_PTZ_B1_STOP = 41;
/// <summary>
/// 变倍-
/// </summary>
public const int KEY_PTZ_B2_START = 42; /* 变倍- */
public const int KEY_PTZ_B2_STOP = 43;
//9000新增
public const int KEY_CODE_11 = 44;
public const int KEY_CODE_12 = 45;
public const int KEY_CODE_13 = 46;
public const int KEY_CODE_14 = 47;
public const int KEY_CODE_15 = 48;
public const int KEY_CODE_16 = 49;
/// <summary>
/// 获取网络应用参数 EMAIL
/// </summary>
public const int NET_DVR_GET_EMAILCFG = 228;//
/// <summary>
/// 设置网络应用参数 EMAIL
/// </summary>
public const int NET_DVR_SET_EMAILCFG = 229; //
//对应NET_DVR_EMAILCFG结构
//
public const int NET_DVR_GET_ALLHDCFG = 300; //
#region DS9000新增命令(_V30)
//设备编码类型配置(NET_DVR_COMPRESSION_AUDIO结构)
/// <summary>
/// 获取设备语音对讲编码参数
/// </summary>
public const int NET_DVR_GET_COMPRESSCFG_AUD = 1058; //
/// <summary>
/// 设置设备语音对讲编码参数
/// </summary>
public const int NET_DVR_SET_COMPRESSCFG_AUD = 1059; //
#endregion
/// <summary>
/// 预览异常
/// </summary>
public const int NET_DVR_REALPLAYEXCEPTION = 111;//
/// <summary>
/// 预览时连接断开
/// </summary>
public const int NET_DVR_REALPLAYNETCLOSE = 112;//
/// <summary>
/// 预览5s没有收到数据
/// </summary>
public const int NET_DVR_REALPLAY5SNODATA = 113; //
/// <summary>
/// 预览重连
/// </summary>
public const int NET_DVR_REALPLAYRECONNECT = 114; //
/// <summary>
/// 回放数据播放完毕
/// </summary>
public const int NET_DVR_PLAYBACKOVER = 101;//
/// <summary>
/// 回放异常
/// </summary>
public const int NET_DVR_PLAYBACKEXCEPTION = 102;//
/// <summary>
/// 回放时候连接断开
/// </summary>
public const int NET_DVR_PLAYBACKNETCLOSE = 103;//
/// <summary>
/// 回放5s没有收到数据
/// </summary>
public const int NET_DVR_PLAYBACK5SNODATA = 104;
#region DS-6001D/F
/// <summary>
/// DS-6001D Decoder
/// NET_DVR_DECODERINFO, *LPNET_DVR_DECODERINFO;
/// </summary>
public struct NET_DVR_DECODERINFO
{
/// <summary>
/// 解码设备连接的服务器IP
/// public byte byEncoderIP[16];
/// </summary>
public byte[] byEncoderIP;
/// <summary>
/// 解码设备连接的服务器的用户名
/// public byte byEncoderUser[16];
/// </summary>
public byte[] byEncoderUser;
/// <summary>
/// 解码设备连接的服务器的密码
/// public byte byEncoderPasswd[16];
/// </summary>
public byte[] byEncoderPasswd;
/// <summary>
/// 解码设备连接服务器的连接模式
/// </summary>
public byte bySendMode;
/// <summary>
/// 解码设备连接的服务器的通道号
/// </summary>
public byte byEncoderChannel;
/// <summary>
/// 解码设备连接的服务器的端口号
/// </summary>
public ushort wEncoderPort;
/// <summary>
/// 保留
/// public byte reservedData[4];
/// </summary>
public byte[] reservedData;
}
/// <summary>
/// NET_DVR_DECODERSTATE, *LPNET_DVR_DECODERSTATE;
/// </summary>
public struct NET_DVR_DECODERSTATE
{
/// <summary>
/// 解码设备连接的服务器IP
/// public byte byEncoderIP[16];
/// </summary>
public byte[] byEncoderIP;
/// <summary>
/// 解码设备连接的服务器的用户名
/// public byte byEncoderUser[16];
/// </summary>
public byte[] byEncoderUser;
/// <summary>
/// 解码设备连接的服务器的密码
/// public byte byEncoderPasswd[16];
/// </summary>
public byte[] byEncoderPasswd;
/// <summary>
/// 解码设备连接的服务器的通道号
/// </summary>
public byte byEncoderChannel;
/// <summary>
/// 解码设备连接的服务器的连接模式
/// </summary>
public byte bySendMode;
/// <summary>
/// 解码设备连接的服务器的端口号
/// </summary>
public ushort wEncoderPort;
/// <summary>
/// 解码设备连接服务器的状态
/// </summary>
public uint dwConnectState;
/// <summary>
/// 保留
/// public byte reservedData[4];
/// </summary>
public byte[] reservedData;
}
#region 解码设备控制码定义
public const int NET_DEC_STARTDEC = 1;
public const int NET_DEC_STOPDEC = 2;
public const int NET_DEC_STOPCYCLE = 3;
public const int NET_DEC_CONTINUECYCLE = 4;
#endregion
#endregion
/// <summary>
/// NET_DVR_EMAILPARA, *LPNET_DVR_EMAILPARA;
/// </summary>
public struct NET_DVR_EMAILPARA
{
/// <summary>
/// 邮件账号
/// public byte sUsername[64];
/// </summary>
public string sUsername;
/// <summary>
/// 邮件密码
/// public byte sPassword[64];
/// </summary>
public string sPassword;
/// <summary>
/// public byte sSmtpServer[64];
/// </summary>
public string sSmtpServer;
/// <summary>
/// public byte sPop3Server[64];
/// </summary>
public string sPop3Server;
/// <summary>
/// 邮件地址
/// public byte sMailAddr[64];
/// </summary>
public string sMailAddr;
/// <summary>
/// 上传报警/异常等的email
/// public byte sEventMailAddr1[64];
/// </summary>
public byte[] sEventMailAddr1;
/// <summary>
/// public byte sEventMailAddr2[64];
/// </summary>
public byte[] sEventMailAddr2;
/// <summary>
/// public byte res[16];
/// </summary>
public byte[] res;
}
/// <summary>
/// NET_DVR_NETCFG_OTHER, *LPNET_DVR_NETCFG_OTHER;
/// </summary>
public struct NET_DVR_NETCFG_OTHER
{
public uint dwSize;
/// <summary>
/// char sFirstDNSIP[16];
/// </summary>
public string sFirstDNSIP;
/// <summary>
/// char sSecondDNSIP[16];
/// </summary>
public string sSecondDNSIP;
/// <summary>
/// char sRes[32];
/// </summary>
public string sRes;
}
/// <summary>
/// 连接的通道配置 2007-11-05
/// NET_DVR_MATRIX_DECCHANINFO, *LPNET_DVR_MATRIX_DECCHANINFO;
/// </summary>
public struct NET_DVR_MATRIX_DECCHANINFO
{
/// <summary>
/// 是否启用 0－否 1－启用
/// </summary>
public uint dwEnable;
/// <summary>
/// 轮循解码通道信息
/// </summary>
public NET_DVR_MATRIX_DECINFO struDecChanInfo;
}
/// <summary>
/// 压缩参数?
/// NET_DVR_COMPRESSIONCFG_NEW, *LPNET_DVR_COMPRESSIONCFG_NEW;
/// </summary>
public struct NET_DVR_COMPRESSIONCFG_NEW
{
public uint dwSize;
/// <summary>
/// 定时录像
/// </summary>
public NET_DVR_COMPRESSION_INFO_EX struLowCompression;
/// <summary>
/// 事件触发录像
/// </summary>
public NET_DVR_COMPRESSION_INFO_EX struEventCompression;
}
/// <summary>
/// 抓图模式
/// </summary>
public enum CAPTURE_MODE
{
/// <summary>
/// BMP模式
/// </summary>
BMP_MODE = 0, //
/// <summary>
/// JPEG模式
/// </summary>
JPEG_MODE = 1 //
}
/// <summary>
/// 实时声音模式
/// </summary>
public enum REALSOUND_MODE
{
/// <summary>
/// 独占模式
/// </summary>
MONOPOLIZE_MODE = 1,
/// <summary>
/// 共享模式
/// </summary>
SHARE_MODE = 2
}
/// <summary>
/// 录象文件参数(带卡号)
/// NET_DVR_FINDDATA_CARD, *LPNET_DVR_FINDDATA_CARD;
/// </summary>
public struct NET_DVR_FINDDATA_CARD
{
/// <summary>
/// 文件名
/// char sFileName[100];
/// </summary>
public string sFileName;
/// <summary>
/// 文件的开始时间
/// </summary>
public NET_DVR_TIME struStartTime;
/// <summary>
/// 文件的结束时间
/// </summary>
public NET_DVR_TIME struStopTime;
/// <summary>
/// 文件的大小
/// </summary>
public uint dwFileSize;
/// <summary>
/// 卡号?
/// char sCardNum[32];
/// </summary>
public char sCardNum;
}
/// <summary>
/// 设置重新连接间隔
/// NET_DVR_API BOOL __stdcall NET_DVR_SetReconnect(DWORD dwInterval = 30000, BOOL bEnableRecon = TRUE);
/// </summary>
/// <param name="dwInterval"></param>
/// <param name="bEnableRecon"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SetReconnect(uint dwInterval, bool bEnableRecon);
/// <summary>
/// 通过IPSever获取设备动态IP地址[Ex]
/// NET_DVR_API BOOL __stdcall NET_DVR_GetDVRIPByResolveSvr_EX(char *sServerIP, WORD wServerPort, unsigned char *sDVRName, WORD wDVRNameLen, BYTE *sDVRSerialNumber, WORD wDVRSerialLen, char* sGetIP, DWORD *dwPort);
/// </summary>
/// <param name="sServerIP"></param>
/// <param name="wServerPort"></param>
/// <param name="sDVRName"></param>
/// <param name="wDVRNameLen"></param>
/// <param name="sDVRSerialNumber"></param>
/// <param name="wDVRSerialLen"></param>
/// <param name="sGetIP"></param>
/// <param name="dwPort"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetDVRIPByResolveSvr_EX(string sServerIP, ushort wServerPort, string sDVRName, ushort wDVRNameLen, string sDVRSerialNumber, ushort wDVRSerialLen, StringBuilder sGetIP, ref uint dwPort);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZControlWithSpeed_EX(LONG lRealHandle, DWORD dwPTZCommand, DWORD dwStop, DWORD dwSpeed);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZCommand"></param>
/// <param name="dwStop"></param>
/// <param name="dwSpeed"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZControlWithSpeed_EX(int lRealHandle, uint dwPTZCommand, uint dwStop, uint dwSpeed);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack(LONG lRealHandle,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack(int lRealHandle, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack_Other(LONG lUserID,LONG lChannel,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack_Other(int lUserID, int lChannel, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_PTZMltTrack_EX(LONG lRealHandle,DWORD dwPTZTrackCmd, DWORD dwTrackIndex);
/// </summary>
/// <param name="lRealHandle"></param>
/// <param name="dwPTZTrackCmd"></param>
/// <param name="dwTrackIndex"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_PTZMltTrack_EX(int lRealHandle, uint dwPTZTrackCmd, uint dwTrackIndex);
/// <summary>
/// NET_DVR_API LONG __stdcall NET_DVR_FindNextFile_Card(LONG lFindHandle, LPNET_DVR_FINDDATA_CARD lpFindData);
/// </summary>
/// <param name="lFindHandle"></param>
/// <param name="lpFindData"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_FindNextFile_Card(int lFindHandle, NET_DVR_FINDDATA_CARD lpFindData);
/// <summary>
/// NET_DVR_API LONG __stdcall NET_DVR_FindFile_Card(LONG lUserID, LONG lChannel, DWORD dwFileType, LPNET_DVR_TIME lpStartTime, LPNET_DVR_TIME lpStopTime);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwFileType"></param>
/// <param name="lpStartTime"></param>
/// <param name="lpStopTime"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_FindFile_Card(int lUserID, int lChannel, uint dwFileType, NET_DVR_TIME lpStartTime, NET_DVR_TIME lpStopTime);
/// <summary>
/// NET_DVR_API int __stdcall NET_DVR_GetPlayBackPos(LONG lPlayHandle);
/// </summary>
/// <param name="lPlayHandle"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern int NET_DVR_GetPlayBackPos(int lPlayHandle);
//解码设备DS-6001D/DS-6001F
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_StartDecode(LONG lUserID, LONG lChannel, LPNET_DVR_DECODERINFO lpDecoderinfo);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="lpDecoderinfo"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_StartDecode(int lUserID, int lChannel, NET_DVR_DECODERINFO lpDecoderinfo);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_StopDecode(LONG lUserID, LONG lChannel);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_StopDecode(int lUserID, int lChannel);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_GetDecoderState(LONG lUserID, LONG lChannel, LPNET_DVR_DECODERSTATE lpDecoderState);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="lpDecoderState"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetDecoderState(int lUserID, int lChannel, NET_DVR_DECODERSTATE lpDecoderState);
/// <summary>
/// 保存参数
/// NET_DVR_API BOOL __stdcall NET_DVR_SaveConfig(LONG lUserID);
/// </summary>
/// <param name="lUserID"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SaveConfig(int lUserID);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_SetVideoEffect(LONG lUserID, LONG lChannel, DWORD dwBrightValue, DWORD dwContrastValue, DWORD dwSaturationValue, DWORD dwHueValue);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="dwBrightValue"></param>
/// <param name="dwContrastValue"></param>
/// <param name="dwSaturationValue"></param>
/// <param name="dwHueValue"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_SetVideoEffect(int lUserID, int lChannel, uint dwBrightValue, uint dwContrastValue, uint dwSaturationValue, uint dwHueValue);
/// <summary>
/// NET_DVR_API BOOL __stdcall NET_DVR_GetVideoEffect(LONG lUserID, LONG lChannel, DWORD *pBrightValue, DWORD *pContrastValue, DWORD *pSaturationValue, DWORD *pHueValue);
/// </summary>
/// <param name="lUserID"></param>
/// <param name="lChannel"></param>
/// <param name="pBrightValue"></param>
/// <param name="pContrastValue"></param>
/// <param name="pSaturationValue"></param>
/// <param name="pHueValue"></param>
/// <returns></returns>
[DllImport("HCNetSDK.dll")]
public static extern bool NET_DVR_GetVideoEffect(int lUserID, int lChannel, out uint pBrightValue, out uint pContrastValue, out uint pSaturationValue, out uint pHueValue); 三、下章预告
实现最基本的连接服务器并预览图像的功能。
结束语
首先我必须强调本章的翻译是一个体力活！本章可能会再随后的文章不断的更新，主要是数据类型对应可能有问题，这里也是凭经验来进行对应了，也欢迎有朋友尽早的向我提交勘误，我好及时的更新文章。
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- C# 海康DVR客户端开发系列（2）—— 封装API (3)
- C# 海康DVR客户端开发系列（2）—— 封装API (1)
- C# 海康DVR客户端开发系列（2）—— 封装API (2)
- C# 海康DVR客户端开发系列（1）—— 准备
- C# 海康DVR客户端开发系列（1）—— 准备
- C# 海康DVR客户端开发系列（3）—— 连接DVR和图像预览
- C# 海康DVR客户端开发系列（3）—— 连接DVR和图像预览
- C#封装的海康DVR客户端SDK
- RabbitMQ系列教程之七：RabbitMQ的 C# 客户端 API 的简介
- C# 视频监控系列（11）：H264播放器——封装API[HikPlayM4.dll](4)
- 【SignalR学习系列】8. SignalR Hubs Api 详解（.Net C# 客户端）
- 【SignalR学习系列】8. SignalR Hubs Api 详解（.Net C# 客户端）
- 使用C#开发HTTP服务器系列之构建RESTful API
- C# 视频监控系列（11）：H264播放器——封装API[HikPlayM4.dll] (5)
- C#封装的海康DVR客户端SDK
- C#开发微信门户及应用(32)--微信支付接入和API封装使用
- 【SignalR学习系列】8. SignalR Hubs Api 详解（.Net C# 客户端）
- Python量化交易平台开发教程系列2-类CTP交易API的Python封装设计
- C#开发微信门户及应用(32)--微信支付接入和API封装使用
- RabbitMQ系列教程之七：RabbitMQ的 C# 客户端 API 的简介