sql server 2000 单主键高效分页存储过程
2009-09-29 11:18
477 查看
http://www.cnblogs.com/nzperfect/archive/2009/06/14/1503237.html
Create PROC P_viewPage
/**//*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), --表名
@FieldList VARCHAR(2000), --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100), --单一主键或唯一值键
@Where VARCHAR(2000), --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000), --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, --记录总数 0:会返回总记录
@PageSize INT, --每页输出的记录数
@PageIndex INT, --当前页数
@TotalCount INT OUTPUT , --记返回总记录
@TotalPageCount INT OUTPUT --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 or CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' or ISNULL(@FieldList,'') = ''
or ISNULL(@PrimaryKey,'') = ''
or @SortType < 1 or @SortType >3
or @RecorderCount < 0 or @PageSize < 0 or @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' Where '
END
ELSE
BEGIN
SET @new_where1 = ' Where ' + @where
SET @new_where2 = ' Where ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' or @SortType = 1 or @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' orDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' orDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' orDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' orDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' orDER BY ' + @Order
END
IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' orDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' orDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'Select @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM (Select * FROM ' + @TableName + @new_where1+') AS T'
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
Select @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 or @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'Select * FROM (Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1 +') AS TMP ' + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(Select MAX(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(Select MIN(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2 --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(Select MIN(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(Select MAX(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3 --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' Select TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' Select TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
PRINT(@SQL)
EXEC(@Sql)
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
sql测试:
--测试数据
--select count(*) from T_TEST
Create TABLE T_TEST(ID INT IDENTITY(1,1) PRIMARY KEY,CLASS_A VARCHAR(50),CLASS_B VARCHAR(50),ADD_DT DATETIME)
DECLARE @I INT
Select @I = 1
WHILE @I < = 999998
BEGIN
Insert INTO T_TEST(CLASS_A,CLASS_B,ADD_DT)
Select CASE @I%2 WHEN 0 THEN 'CLASS_A' + CAST(@I AS VARCHAR) ELSE CAST(@I AS VARCHAR) END,
CASE @I%5 WHEN 0 THEN 'CLASS_B' + CAST(@I AS VARCHAR) ELSE CAST(@I AS VARCHAR) END, GETDATE()
Select @I = @I + 1
END
Create INDEX _INDEX ON T_TEST(add_dt,id)
使用： 以多列排序为例
第一页查询，
第一页取出总记录和总页数，以后就不要从数据库里取了
DECLARE @T1 DATETIME,@T2 DATETIME
DECLARE @A INT,@B INT
Select @T1 = GETDATE()
EXEC P_viewPage 'T_TEST','ID,ADD_DT','id','','add_dt asc,id asc',3,0,10,1,@A out,@B out
Select @T2 = GETDATE()
Select CAST(DATEDIFF(ms,@T1,@T2) AS VARCHAR)+'ms'
Select @A,@B
其它页(如第1161页)：
DECLARE @T1 DATETIME,@T2 DATETIME
DECLARE @A INT,@B INT
Select @T1 = GETDATE()
EXEC P_viewPage 'T_TEST','ID,ADD_DT','id','','add_dt asc,id asc',3,999998,10,1161,null,null
Select @T2 = GETDATE()
Select CAST(DATEDIFF(ms,@T1,@T2) AS VARCHAR)+'ms'
--Select @A,@B
asp调用简单例子:
<% Option Explicit%>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312" />
<style>
body{
font-family: "宋体";
font-size: 9pt;
text-decoration: none;
line-height: 150%;
margin: 0px;
background-color: #A8C2F9;
}
a:link { color: #000000; text-decoration: none}
a:visited { color: #000000; text-decoration: none}
a:hover { color: #3333ff; text-decoration: none}
</style>
</head>
<body>
<%
Dim strDbConn , Conn
strDBConn = "Provider=SQLOLEDB.1;Password=xxxxxxxxxx;Persist Security Info=True; " & _
"User ID=sa;Initial Catalog=DB_xxx;Data Source=RDG_NZ"
Set Conn = Server.CreateObject("ADODB.Connection")
Dim startime
startime=timer()
Function PageView(pagecount,pagesize,page,recordercount)
'pagecount 总页数
'pagesize 每页显示数量
'page 当前是第几页
'recordercount 总记录数量
'get方式传值： pagecount:总页数 recordercount:总记录数量
pagecount = Clng(pagecount)
pagesize = Clng(pagesize)
page = Clng(page)
recordercount = Clng(recordercount)
Dim query, a, x, temp ,action
action = "http://" & Request.ServerVariables("HTTP_HOST") _
& Request.ServerVariables("SCRIPT_NAME")
query = Split(Request.ServerVariables("QUERY_STRING"), "&")
For Each x In query
a = Split(x, "=")
If StrComp(a(0), "page", vbTextCompare) <> 0 and _
StrComp(a(0), "pagecount", vbTextCompare) <> 0 _
and StrComp(a(0), "recordercount", vbTextCompare) <> 0 Then
temp = temp & a(0) & "=" & a(1) & "&"
End If
Next
PageView = "<form method=get onsubmit=""document.location = '" _
& action & "?" & temp & "Page='+this.page.value;return false;"">"
If page<=1 then
PageView = PageView & "[首页] [上一页] "
Else
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=1>首页</a>] "
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=" & (Page-1) & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">上一页</a>] "
End If
If page>=pagecount then
PageView = PageView & "[下一页] [尾页] "
Else
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=" & (Page+1) & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">下一页</a>] "
PageView = PageView & "[<a href=" & action & "?" & temp & "Page="& pagecount & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">尾页</a>] "
End If
PageView = PageView & "[页次:<font color=red>" & page & "</font>/" & pageCount
PageView = PageView & "] [共" & recordercount & "条 <font color=red>"& pagesize & _
"</font>条/页]"
PageView = PageView & " 转到" & "<input name=page size=4 value=" & page & _
">" & "页<input type=submit value=go></form>"
End Function
Dim TableName '表名
Dim FieldList '显示列名，如果是全部字段则为*
Dim PrimaryKey '单一主键或唯一值键
Dim Where '查询条件 不含'where'字符，如id>10 and len(userid)>9
Dim order '排 序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
'注意当Dim SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
Dim SortType '排序规则 1:正序asc 2:倒序desc 3:多列排序方法
Dim RecorderCount '记录总数 0:会返回总记录
Dim PageSize '每页输出的记录数
Dim PageIndex '当前页数
Dim TotalCount '记返回总记录
Dim TotalPageCount '记返回总页数
TableName = "T_TEST"
FieldList = "*"
PrimaryKey = "id"
Where = "id>"& request("id")
order = "id asc"
SortType = "1"
If Request("recordercount")="" Then
RecorderCount = "0"
Else
RecorderCount = Request("recordercount")
End If
PageSize = "10"
If Request("page")="" Then
PageIndex = "1"
Else
PageIndex = Request("page")
End If
TotalCount = RecorderCount
If Request("pagecount")="" Then
TotalPageCount = "1"
Else
TotalPageCount = Request("pagecount")
End If
Dim Cmd ,rs
Set Cmd = Server.CreateObject("ADODB.Command")
Set Rs = Server.CreateObject("ADODB.Recordset")
Conn.Open strDBConn
With Cmd
.CommandText = "P_viewPage"
.CommandType = 4
.CommandTimeout = 0
.ActiveConnection = Conn
.Parameters.Append .CreateParameter("@TableName",200,1,200,TableName)
.Parameters.Append .CreateParameter("@FieldList",200,1,2000,FieldList)
.Parameters.Append .CreateParameter("@PrimaryKey",200,1,100,PrimaryKey)
.Parameters.Append .CreateParameter("@Where",200,1,2000,Where)
.Parameters.Append .CreateParameter("@Order",200,1,1000,Order)
.Parameters.Append .CreateParameter("@SortType",3,1,,SortType)
.Parameters.Append .CreateParameter("@RecorderCount",3,1,,RecorderCount)
.Parameters.Append .CreateParameter("@PageSize",3,1,,PageSize)
.Parameters.Append .CreateParameter("@PageIndex",3,1,,PageIndex)
.Parameters.Append .CreateParameter("@TotalCount",3,3,,TotalCount)
.Parameters.Append .CreateParameter("@TotalPageCount",3,3,,TotalPageCount)
Set rs = .Execute
If Not rs.Eof Then
while not rs.Eof
Rem 输出你的记录集内容
Response.Write rs(0) & " || " & rs(1) & "<br>"
rs.MoveNext
wend
End If
rs.Close
TotalCount = .Parameters("@TotalCount")
TotalPageCount = .Parameters("@TotalPageCount")
End With
Set Rs = Nothing
Set Cmd = Nothing
Conn.Close
Set Conn = Nothing
Response.write PageView(TotalPageCount,pagesize,PageIndex,TotalCount)
Dim endtime
endtime=timer()
%>
<br>页面执行时间：<%=FormatNumber((endtime-startime)*1000,3)%>毫秒
</body>
</html>
Create PROC P_viewPage
/**//*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), --表名
@FieldList VARCHAR(2000), --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100), --单一主键或唯一值键
@Where VARCHAR(2000), --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000), --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, --记录总数 0:会返回总记录
@PageSize INT, --每页输出的记录数
@PageIndex INT, --当前页数
@TotalCount INT OUTPUT , --记返回总记录
@TotalPageCount INT OUTPUT --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 or CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' or ISNULL(@FieldList,'') = ''
or ISNULL(@PrimaryKey,'') = ''
or @SortType < 1 or @SortType >3
or @RecorderCount < 0 or @PageSize < 0 or @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' Where '
END
ELSE
BEGIN
SET @new_where1 = ' Where ' + @where
SET @new_where2 = ' Where ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' or @SortType = 1 or @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' orDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' orDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' orDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' orDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' orDER BY ' + @Order
END
IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' orDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' orDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'Select @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM (Select * FROM ' + @TableName + @new_where1+') AS T'
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
Select @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 or @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'Select * FROM (Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1 +') AS TMP ' + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(Select MAX(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(Select MIN(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2 --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(Select MIN(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'Select TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(Select MAX(' + @PrimaryKey + ') FROM (Select TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3 --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' Select TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'Select TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' Select TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
PRINT(@SQL)
EXEC(@Sql)
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
sql测试:
--测试数据
--select count(*) from T_TEST
Create TABLE T_TEST(ID INT IDENTITY(1,1) PRIMARY KEY,CLASS_A VARCHAR(50),CLASS_B VARCHAR(50),ADD_DT DATETIME)
DECLARE @I INT
Select @I = 1
WHILE @I < = 999998
BEGIN
Insert INTO T_TEST(CLASS_A,CLASS_B,ADD_DT)
Select CASE @I%2 WHEN 0 THEN 'CLASS_A' + CAST(@I AS VARCHAR) ELSE CAST(@I AS VARCHAR) END,
CASE @I%5 WHEN 0 THEN 'CLASS_B' + CAST(@I AS VARCHAR) ELSE CAST(@I AS VARCHAR) END, GETDATE()
Select @I = @I + 1
END
Create INDEX _INDEX ON T_TEST(add_dt,id)
使用： 以多列排序为例
第一页查询，
第一页取出总记录和总页数，以后就不要从数据库里取了
DECLARE @T1 DATETIME,@T2 DATETIME
DECLARE @A INT,@B INT
Select @T1 = GETDATE()
EXEC P_viewPage 'T_TEST','ID,ADD_DT','id','','add_dt asc,id asc',3,0,10,1,@A out,@B out
Select @T2 = GETDATE()
Select CAST(DATEDIFF(ms,@T1,@T2) AS VARCHAR)+'ms'
Select @A,@B
其它页(如第1161页)：
DECLARE @T1 DATETIME,@T2 DATETIME
DECLARE @A INT,@B INT
Select @T1 = GETDATE()
EXEC P_viewPage 'T_TEST','ID,ADD_DT','id','','add_dt asc,id asc',3,999998,10,1161,null,null
Select @T2 = GETDATE()
Select CAST(DATEDIFF(ms,@T1,@T2) AS VARCHAR)+'ms'
--Select @A,@B
asp调用简单例子:
<% Option Explicit%>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312" />
<style>
body{
font-family: "宋体";
font-size: 9pt;
text-decoration: none;
line-height: 150%;
margin: 0px;
background-color: #A8C2F9;
}
a:link { color: #000000; text-decoration: none}
a:visited { color: #000000; text-decoration: none}
a:hover { color: #3333ff; text-decoration: none}
</style>
</head>
<body>
<%
Dim strDbConn , Conn
strDBConn = "Provider=SQLOLEDB.1;Password=xxxxxxxxxx;Persist Security Info=True; " & _
"User ID=sa;Initial Catalog=DB_xxx;Data Source=RDG_NZ"
Set Conn = Server.CreateObject("ADODB.Connection")
Dim startime
startime=timer()
Function PageView(pagecount,pagesize,page,recordercount)
'pagecount 总页数
'pagesize 每页显示数量
'page 当前是第几页
'recordercount 总记录数量
'get方式传值： pagecount:总页数 recordercount:总记录数量
pagecount = Clng(pagecount)
pagesize = Clng(pagesize)
page = Clng(page)
recordercount = Clng(recordercount)
Dim query, a, x, temp ,action
action = "http://" & Request.ServerVariables("HTTP_HOST") _
& Request.ServerVariables("SCRIPT_NAME")
query = Split(Request.ServerVariables("QUERY_STRING"), "&")
For Each x In query
a = Split(x, "=")
If StrComp(a(0), "page", vbTextCompare) <> 0 and _
StrComp(a(0), "pagecount", vbTextCompare) <> 0 _
and StrComp(a(0), "recordercount", vbTextCompare) <> 0 Then
temp = temp & a(0) & "=" & a(1) & "&"
End If
Next
PageView = "<form method=get onsubmit=""document.location = '" _
& action & "?" & temp & "Page='+this.page.value;return false;"">"
If page<=1 then
PageView = PageView & "[首页] [上一页] "
Else
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=1>首页</a>] "
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=" & (Page-1) & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">上一页</a>] "
End If
If page>=pagecount then
PageView = PageView & "[下一页] [尾页] "
Else
PageView = PageView & "[<a href=" & action & "?" & temp & "Page=" & (Page+1) & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">下一页</a>] "
PageView = PageView & "[<a href=" & action & "?" & temp & "Page="& pagecount & _
"&pagecount="& pagecount &"&recordercount="& recordercount &">尾页</a>] "
End If
PageView = PageView & "[页次:<font color=red>" & page & "</font>/" & pageCount
PageView = PageView & "] [共" & recordercount & "条 <font color=red>"& pagesize & _
"</font>条/页]"
PageView = PageView & " 转到" & "<input name=page size=4 value=" & page & _
">" & "页<input type=submit value=go></form>"
End Function
Dim TableName '表名
Dim FieldList '显示列名，如果是全部字段则为*
Dim PrimaryKey '单一主键或唯一值键
Dim Where '查询条件 不含'where'字符，如id>10 and len(userid)>9
Dim order '排 序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
'注意当Dim SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
Dim SortType '排序规则 1:正序asc 2:倒序desc 3:多列排序方法
Dim RecorderCount '记录总数 0:会返回总记录
Dim PageSize '每页输出的记录数
Dim PageIndex '当前页数
Dim TotalCount '记返回总记录
Dim TotalPageCount '记返回总页数
TableName = "T_TEST"
FieldList = "*"
PrimaryKey = "id"
Where = "id>"& request("id")
order = "id asc"
SortType = "1"
If Request("recordercount")="" Then
RecorderCount = "0"
Else
RecorderCount = Request("recordercount")
End If
PageSize = "10"
If Request("page")="" Then
PageIndex = "1"
Else
PageIndex = Request("page")
End If
TotalCount = RecorderCount
If Request("pagecount")="" Then
TotalPageCount = "1"
Else
TotalPageCount = Request("pagecount")
End If
Dim Cmd ,rs
Set Cmd = Server.CreateObject("ADODB.Command")
Set Rs = Server.CreateObject("ADODB.Recordset")
Conn.Open strDBConn
With Cmd
.CommandText = "P_viewPage"
.CommandType = 4
.CommandTimeout = 0
.ActiveConnection = Conn
.Parameters.Append .CreateParameter("@TableName",200,1,200,TableName)
.Parameters.Append .CreateParameter("@FieldList",200,1,2000,FieldList)
.Parameters.Append .CreateParameter("@PrimaryKey",200,1,100,PrimaryKey)
.Parameters.Append .CreateParameter("@Where",200,1,2000,Where)
.Parameters.Append .CreateParameter("@Order",200,1,1000,Order)
.Parameters.Append .CreateParameter("@SortType",3,1,,SortType)
.Parameters.Append .CreateParameter("@RecorderCount",3,1,,RecorderCount)
.Parameters.Append .CreateParameter("@PageSize",3,1,,PageSize)
.Parameters.Append .CreateParameter("@PageIndex",3,1,,PageIndex)
.Parameters.Append .CreateParameter("@TotalCount",3,3,,TotalCount)
.Parameters.Append .CreateParameter("@TotalPageCount",3,3,,TotalPageCount)
Set rs = .Execute
If Not rs.Eof Then
while not rs.Eof
Rem 输出你的记录集内容
Response.Write rs(0) & " || " & rs(1) & "<br>"
rs.MoveNext
wend
End If
rs.Close
TotalCount = .Parameters("@TotalCount")
TotalPageCount = .Parameters("@TotalPageCount")
End With
Set Rs = Nothing
Set Cmd = Nothing
Conn.Close
Set Conn = Nothing
Response.write PageView(TotalPageCount,pagesize,PageIndex,TotalCount)
Dim endtime
endtime=timer()
%>
<br>页面执行时间：<%=FormatNumber((endtime-startime)*1000,3)%>毫秒
</body>
</html>
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- sql server 2000 单主键高效分页存储过程 (支持多字段排序)
- sql server 单主键高效分页存储过程 (支持多字段排序)
- sql server 2005分页存储过程和sql server 2000分页存储过程
- SQL SERVER 2005 通用高效分页存储过程
- 【转】两个sql server 2000的通用分页存储过程
- 两个sql server 2000的通用分页存储过程
- 【转】一个sql server 2000的分页存储过程
- 两个Sql Server 2000的通用分页存储过程
- 又一个sql server 2000的分页存储过程
- sql server 2005分页存储过程和sql server 2000分页存储过程
- SQL Server 2000通用分页查询存储过程(可指定返回字段,查询条件)
- SQL Server 存储过程分页大全(2005,2000)
- 自己改写的一个Sql Server 2000的分页存储过程
- sql server 2005分页存储过程和sql server 2000分页存储过程
- Sql Server 存储过程分页大全(2005,2000)
- SQL Server 存储过程的经典分页
- SQL Server 存储过程的分页
- SQL Server 存储过程的经典分页
- oracle高效分页存储过程（百万数据级）
- 基于SQL SERVER 分页的存储过程