Testpassport 642-655 题库(一部分)

WAASSE642-655 试题库由资深IT认证讲师和 WAASSE 产品专家结合 PROMETRIC 或 VUE 的真实考试环境最新原题倾心打造.最新 642-655题库
认证编号: WAASFE-Wide Area Application Services for Field Engineers（642-655）
Q&A: 71 Q&A
更新: 2009-08-18
(1-10题)1. One of your customers is using firewalls. What need to be permitted to pass through firewalls in order
to allow WAE autodiscovery?
A. TCP port 139
B. TCP options
C. TCP port 445
D. TCP SYN-ACK with data
Answer: B
2. When a Cisco WAE that was optimizing connections fails, which two symptoms will appear in a TCP
trace? (Choose two.)
A. The receiving node receives TCP segments with invalid sequence numbers and resets the connection.
B. All optimized TCP connections are taken over by the receiving node.
C. The secondary WAE takes over the connection and the receiving node sees nothing.
D. All optimized TCP connections handled by that WAE are reset.
Answer: AD
3. After configuring a Cisco WAAS deployment using WCCPv2, you find that you can successfully ping a
data center server from a workstation in the branch office. However, when you attempt to start one of the
optimized applications, the application cannot communicate with the server. What is the most likely
cause?
A. There is insufficient disk space on either the edge or core WAE.
B. You configured half-duplex mode on the WAE interfaces.
C. You configured autonegotiate duplex mode on the WAE interfaces.
D. You deployed the WAE on the same subnet as the users or servers.
Answer: D
4. In order to enable load balancing across WAE interfaces, which WAE deployment model should be
used to configure PortChannels on the core WAE appliances?
A. on-router, two-arm
B. off-router, one-arm
C. off-router, two-arm
D. on-router, one-arm
Answer: B
5. What is the primary issue with port 8443 traffic not being optimized according to the following Central
Manger Connection Statistics screen?
<e ip="5.jpg"></e>
A. The proper classifier is not being applied.
B. The pod7-BR-WAE is overloaded.
C. The connections are not staying open.
D. There is no acceleration policy matching the traffic.
Answer: D
6. When implementing Windows authentication for WAE management, what is the maximum allowable
time skew between each WAE and the Windows domain controller?
A. 1 second
B. 5 seconds
C. 120 seconds
D. 300 seconds
Answer: D
7. What does the address 10.10.10.10:1 represent while managing a virtual blade through a Virtual
Network Computing client?
A. The virtual blade IP address and the CPU that is being used for virtualization.
B. The Central Manager's IP address and the number of the virtual blade.
C. The IP address of the physical interface the virtual interface is bound to on the WAE and the virtual
blade number.
D. The IP address of the core WAE and the CPU used by the virtualization instance.
Answer: C
8. Based on the following exhibit. Which two are the possible reasons the CORE1 WAE might be
displayed as "Offline"? (Choose two.)
<e ip="8.jpg"></e>
A. The WAE is powered off.
B. The WAE is configured in the same VLAN as the server nodes.
C. The Central Manager service is disabled.
D. The HTTPS service is disabled.
Answer: AC
9. Your customer plans to implement Cisco WAAS using four WAE appliances in a load-balanced
configuration. Which feature must be supported on the switches to which the WAE appliances are
attached?
A. redirect exclusion
B. Layer 2 redirection
C. WCCPv2
D. WCCPv2 or PBR
Answer: C
10. In order to enable virtualization on a WAVE, which two steps should be taken? (Choose two.)
A. Enable the virtual blade.
B. Reload the WAE.
C. Install the transport license.
D. Install the virtual-blade license.
Answer: AD