在VS2005下生成创建运行一个WinCE6.0平台(二)(转摘)
2009-08-10 02:07
411 查看
在VS2005下生成创建运行一个WinCE6.0平台(二)Create an OS design
2008-09-30 19:17
2008-09-30 19:17
Create an OS design 1. Select File | New | Project… from the Visual Studio menu. 2. Select the Platform Builder for CE 6.0 project type in the New Project dialog. 3. Select OS Design under Visual Studio installed templates. 4. Type TrainingOSDesign in the Name field. The solution name will default to TrainingOSDesign as well. 5. Click OK. Visual Studio will launch the Windows Embedded CE 6.0 OS Design Wizard. 6. Click Next. 7. In the list of available BSPs, select TrainingBSP: ARMV4I and click Next. 8. From the list of available design templates, select PDA Device and click Next. 9. From the list of available design variants, select Mobile Handheld and click Next. The Applications & Media configuration window will appear. 10. Deselect .NET Compact Framework 2.0 and ActiveSync and click Next. The Networking & Communications configuration window will appear. 11. Deselect TCP/IPv6 Support. 12. Expand the Personal Area Network (PAN) node, and deselect Bluetooth. 13. Click Next, and then Finish to complete the Windows Embedded CE 6.0 Design Wizard. 14. Click Acknowledge on the Catalog Item Notification dialog. 15. Click on the Catalog Items View tab to display the Catalog.(视图==》其它窗口) 16. Click on the Filter drop down box in the upper left hand corner. Observe the different filtering options. The filter controls the items that are displayed in the catalog. Ensure that All Catalog Items in Catalog is selected. 17. Observe the selection boxes and icons in the catalog. Selection boxes with a green check mark indicate an item that was specifically selected as a part of the OS design. Selection boxes with a green square indicate an item that was brought in to the OS design as a dependency. Selection boxes that are not marked indicate items that are not included in the OS design but are available to be added. 18. Locate a catalog item with a green square in its checkbox. 19. Right click on the catalog item and choose Reasons for Inclusion of Item. The Remove Dependent Catalog Item dialog box displays the catalog items you 20. Close the Remove Dependent Catalog Item dialog box. 21. Expand the Core OS | CEBASE | Applications – End User | Active Sync node in the catalog. 22. Right click on Active Sync system cpl(此项有两处,path1:$(_WINCEROOT)/public/DataSync/oak/ctlpanel/system;path2:$(_WINCEROOT)/public/DataSync/oak/ctlpanel) and select Display In Solution View. The view will change to the Solution Explorer tab(解决方案资源浏览器). The subproject containing the Active Sync component is displayed. This is a great way to navigate the source code that is available as part of Windows Embedded CE 6.0. 23. Select the Catalog Items View tab to display the OS design catalog. 24. Enter the text Internet Explorer 6.0 Sample into the search text box to the right of the filter button. Press Enter or click the green arrow. The path Core OS | CEBASE | Internet Client Services | Browser Application | Internet Explorer 6.0 for Windows Embedded CE – Standard Components should be expanded. 25. Select the Internet Explorer 6.0 Sample Browser catalog item. 26. Enter the text ipconfig into the Search box and press Enter. The Network Utilities (IpConfig, Ping, Route) will be highlighted.(此时提示一对话框,无碍) 27. Add the networking utilities to your design by selecting the component. 28. Enter the text wceload into the Search box and press Enter. The Cab File Installer /Uninstaller component will be highlighted. 29. Add the Cab File Installer /Uninstaller utility to your OS design. 30. Enter the text sysgen_dotnetv2_support into the Search box and press Enter. The OS Dependencies for .NET Compact Framework 2.0 component will be highlighted. 31. Add the OS Dependencies for .NET Compact Framework 2.0 to your OS design. 32. Select Build | Configuration Manager… from the Visual Studio menu to bring up the Configuration Manager dialog box. 33. Select TrainingBSP ARMV4I Release from the Active solution configuration drop down box. Close the dialog box. 34. Select the Solution Explorer view by selecting the Solution Explorer tab. 35. In the Solution Explorer window, right click on the TrainingOSDesign project and choose Properties. This will launch the Property Pages dialog for your OS design. 36. Expand the Configuration Properties tree and click on the Build Options node. 37. Ensure the following build options are set: · Enable eboot space in memory · Enable kernel debugger · Enable KITL · Enable profiling 38. Select OK 39. Select Build | Build TrainingOSDesign from the Visual Studio menu. 40. Select Target | Connectivity Options… from the Visual Studio menu. The Target Device Connectivity Options dialog will appear showing the Kernel Service Map configuration for the CE Device named connection. 41. Select Device Emulator (DMA) from the Download drop down box. 42. Select Device Emulator (DMA) from the Transport drop down box. 43. Select KdStub from the Debugger drop down box. 44. Next to the Download drop down menu click Settings. 45. Select the Display tab in the Emulator Properties dialog box. 46. Change the Screen width to 640 pixels and the Screen height to 480 pixels. 47. Select the Network tab in the Emulator Properties dialog box. 48. Check the box beside Enable NE2000… 49. Click on OK 50. Select Apply to save the new device configuration. 51. Select Close to close the dialog box. 52. Select Target | Attach Device from the Visual Studio menu. |
相关文章推荐
- 在VS2005下生成创建运行一个WinCE6.0平台(一)(转摘)
- 在VS2005下生成创建运行一个WinCE6.0平台(一)Clone the DeviceEmulator BSP
- 在VS2005下生成创建运行一个WinCE6.0平台(一)Clone the DeviceEmulator BSP
- 用VS2005在WinCE6.0创建一个应用程序(转摘)
- 创建基于ARMV4I仿真平台Wince6.0 OS 映像(转摘)
- 编写一个Java程序,创建制定长度的int型数组,并生成100以内的随机数为数组的每个元素赋值
- 解决vs2013下创建的python文件,到其他平台(如linux)下中文乱码(或运行时报SyntaxError: (unicode error) 'utf-8' codec can't decode byte...)
- 随机生成30个数字(范围0-30)存到一个数组中,将数组中重复的数字去除,动态创建数组保存剩下的数字
- 如何用创建命名对象来判断应用程序是否已有一个实例在运行?
- C# 创建互斥程序_只允许运行一个程序实例
- .Net平台下使应用程序只运行一个实例
- 在Appery.io平台上创建一个Mobile App应用
- 用VS2005创建一个Atlas Web应用程序(5)
- Unity之一天一个技术点(三)---判断当前运行的平台
- 利用VS2005创建WINCE 6.0 平台
- jdt 创建java工程,生成代码,运行main方法
- MM应用引擎——一个支持HTML5的互联网应用开发运行托管平台
- 创建maven项目,将该配置文件运行即可生成 sql 语句
- PHP DOM创建生成一个XML文件
- 用字典创建一个平台的用户信息(包含用户名和密码)管理系统,新用户可以用与现有系统帐号不冲突的用户名创建帐号,已存在的老用户则可以用用户名和密码登陆重返系统。