从源码编译安装sipx4.0（CENTOS 操作系统）

SELINUX=disabled

A host that was assigned a fixed IP address:
127.0.0.1               localhost.localdomain localhost
192.168.5.145           sipx.example.com sipx

2.安装DHCP

yum install dhcp

3.配置DHCP服务器

rndc-confgen -a

key "rndckey" {
algorithm hmac-md5;
secret "JIjUPfT2GZZ172o5IdcK1Q==";#这里的key每个人是不同的
};

File: /etc/dhcpd.conf 
 authoritative;              # No other DHCP servers on this subnet
ddns-update-style interim;  # Supported update method - see man dhcpd.conf
# ddns-update-style ad-hoc;  # Add this instead of "interim" if not using ddns
ignore client-updates;      # Overwrite client configured FQHNs
ddns-domainname "domain.com.";
ddns-rev-domainname "in-addr.arpa.";

key rndckey {               # Key for DNS updates
algorithm hmac-md5;
secret "JIjUPfT2GZZ172o5IdcK1Q=="; # 同上边 /etc/rndc.key中的内容
};

zone domain.com. {          # Forward zone to be updated
primary 127.0.0.1;
key rndckey;
}

zone 5.168.192.in-addr.arpa. { # Backward zone to be updated
primary 127.0.0.1;
key rndckey;
}

subnet 192.168.5.0 netmask 255.255.255.0 {

range                         192.168.5.200 192.168.5.250;
default-lease-time            21600;
max-lease-time                43200;

option routers                192.168.5.1;   # Default gateway
option subnet-mask            255.255.255.0;
option domain-name            "example.com";
option domain-name-servers    192.168.5.145; # loopback address does not work here

#  option nis-domain            "example.com";

option time-offset            -18000;        # Eastern Standard Time
option tftp-server-name       "sipx.example.com";  # required for phones to pickup profiles

option ntp-servers            192.168.5.145;
# option netbios-name-servers   192.168.5.145;
# option netbios-node-type      8; # try WINS servers first, broadcast if necessary

# Example for resource reservations:
#       host xyz {
#               ddns-hostname "host.example.com";  # use for hosts that do not send a hostname
#               hardware ethernet 12:34:56:78:AB:CD;
#               fixed-address 192.168.5.x;
#       }
}
4.启动DHCP

[code]/sbin/service dhcpd start

[/code]
五.配置DNS服务器

1.文件 /etc/named.conf

The following two sections were added automatically when running the rndc-confgen -a command:

controls {
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};

include "/etc/rndc.key";

The following options section and two zone definitions were added manually:

options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
};

zone "example.com" IN {
type master;
file "example.com.zone";
allow-update { key "rndckey"; };
notify yes;
};

zone "5.168.192.in-addr.arpa" {
type master;
file "192.168.5.zone";
allow-update { key "rndckey"; };
notify yes;
};

;
; Zone file for domain.com
;

$TTL 3D
@       IN      SOA    ns1.example.com. root.example.com. (
200602132       ; serial#
3600            ; refresh, seconds
3600            ; retry, seconds
3600            ; expire, seconds
3600 )          ; minimum TTL, seconds

NS     ns1.example.com.   ; Inet Address of nameserver
example.com.     MX     10 mail           ; Primary Mail Exchanger
;
localhost       A      127.0.0.1
sipx            A      192.168.5.145     ; Record of class IN by default

_sip._udp       SRV    100     1       5060    sipx
_sip._tcp       SRV    200     1       5060    sipx
_sips._tcp      SRV    300     1       5060    sipx

ns1             CNAME  sipx
mail            CNAME  sipx

3.文件 /var/named/192.168.5.zone[code];
; Reverse zone file for domain.com
;

$TTL 3D
@       IN      SOA    ns1.example.com. root.example.com. (
200602132       ; serial#
3600            ; refresh, seconds
3600            ; retry, seconds
3600            ; expire, seconds
3600 )          ; minimum TTL, seconds

NS     ns1.example.com.   ; Inet Address of nameserver
;
1               PTR    localhost.
145             PTR    sipx.example.com.

; Don't specify any reverse pointer records for addresses in the
; DHCP range. Dynamic updates will define those as necessary.

cd /var/named
chown named:named *
5.赋予 named 对Zone 文件的写权限If SELinux is disabled (required for sipX), then allow named to write its zone files and create files in its $ROOTDIR/var/named directory; this is necessary for dynamic updates (DDNS) and slave zone transfers.

# This line needs to be added
ENABLE_ZONE_WRITE=yes
# This line enables the chroot and was configured automatically when installing the chroot jail
ROOTDIR=/var/named/chroot

search example.com
nameserver 127.0.0.1

7.启动 DNS Server

/sbin/service named start

#!/bin/bash
#
# Copyright (C) 2008 Nortel, certain elements licensed under a Contributor Agreement.
# Contributors retain copyright to elements licensed under a Contributor Agreement.
# Licensed to the User under the LGPL license.
#
###################################################

# See http://sipx-wiki.calivia.com/index.php/Express_Development_Environment_Setup for instructions.

# Clean up the old (which may not even exist...)
if test -x /etc/init.d/sipxpbx
then
sudo /sbin/service sipxpbx stop
elif test -x /etc/init.d/sipxecs
then
sudo /sbin/service sipxecs stop
fi
sudo killall httpd

# You can override the CODE directory, relative to the current directory.
INSTALL=INSTALL
BUILD=BUILD
CODE=main
LINKS=links
EDE_LOGS=ede_logs
if [ $# -gt 0 ]
then
CODE=$1
fi
if [ ! -d $CODE ]; then
echo "Error: Directory './$CODE' does not exist."
exit 1
fi
echo INSTALL=`pwd`/$INSTALL > env
echo BUILD=`pwd`/$BUILD >> env
echo CODE=`pwd`/$CODE >> env
echo LINKS=`pwd`/$LINKS >> env
sudo rm -rf $INSTALL $BUILD $LINKS $CODE/lib/freeswitch/dist $EDE_LOGS
mkdir $INSTALL
mkdir $BUILD
mkdir $EDE_LOGS
FULL_PATH_EDE_LOGS=`pwd`/$EDE_LOGS

# Easy scripts to start, stop, restart, and get status.
echo sudo `pwd`/$INSTALL/etc/init.d/sipxecs start > /tmp/sstart
sudo mv /tmp/sstart /usr/bin/
sudo chmod a+rx /usr/bin/sstart
echo sudo `pwd`/$INSTALL/etc/init.d/sipxecs stop > /tmp/sstop
sudo mv /tmp/sstop /usr/bin/
sudo chmod a+rx /usr/bin/sstop
echo sudo `pwd`/$INSTALL/etc/init.d/sipxecs status > /tmp/sstatus
sudo mv /tmp/sstatus /usr/bin/
sudo chmod a+rx /usr/bin/sstatus
echo sudo `pwd`/$INSTALL/etc/init.d/sipxecs stop > /tmp/srestart
echo sudo `pwd`/$INSTALL/etc/init.d/sipxecs start >> /tmp/srestart
sudo mv /tmp/srestart /usr/bin/
sudo chmod a+rx /usr/bin/srestart

# Get ready to build RPMs.
mv ~/.rpmmacros ~/.rpmmacros.old 2> /dev/null
rpmdev-setuptree

# Configure and compile FreeSWITCH RPMs.
pushd $CODE/lib/freeswitch
rm -rf dist
autoreconf -if
if [ $? != 0 ]
then
echo "Error: FreeSWITCH autoreconf failed, see console output."
exit 2
fi
./configure SIPXPBXUSER='whoami' &> $FULL_PATH_EDE_LOGS/fs_configure_output.txt
if [ $? != 0 ]
then
echo "Error: FreeSWITCH configure failed, see $EDE_LOGS/fs_configure_output.txt."
exit 3
fi
sudo make &> $FULL_PATH_EDE_LOGS/fs_make_output.txt
if [ $? != 0 ]
then
echo "Error: FreeSWITCH RPM build failed, see $EDE_LOGS/fs_make_output.txt."
exit 4
fi

# Uninstall any old FreeSWITCH RPMs.
for fs_old_rpm in `rpm -qa | grep sipx-freeswitch`
do
sudo rpm --erase --nodeps $fs_old_rpm &> $FULL_PATH_EDE_LOGS/fs_install_output.txt
if [ $? != 0 ]
then
echo "Error: FreeSWITCH old RPM uninstall failed, see $EDE_LOGS/fs_install_output.txt"
exit 5
fi
done

# Install the new FreeSWITCH RPMs.
sudo yum -y localinstall dist/RPM/*.rpm &> $FULL_PATH_EDE_LOGS/fs_install_output.txt
if [ $? != 0 ]
then
echo "Error: FreeSWITCH RPM install failed, see $EDE_LOGS/fs_install_output.txt."
exit 6
fi

popd

# Configure, compile, test, and installi sipXecs.
pushd $INSTALL
FULL_INSTALL_PATH=`pwd`
popd
pushd $CODE
FULL_CODE_PATH=`pwd`
autoreconf -if
if [ $? != 0 ]
then
echo "Error: sipXecs autoreconf failed, see console output."
exit 7
fi
popd

pushd $BUILD
$FULL_CODE_PATH/configure --srcdir=$FULL_CODE_PATH --cache-file=`pwd`/ac-cache-file SIPXPBXUSER=`whoami` JAVAC_DEBUG=on --prefix=$FULL_INSTALL_PATH --enable-reports --enable-agent --enable-cdr --enable-conference &> $FULL_PATH_EDE_LOGS/configure_output.txt
if [ $? != 0 ]
then
echo "Error: sipXecs configure failed, see $EDE_LOGS/configure_output.txt."
exit 8
fi
make recurse TARGETS="all install" &> $FULL_PATH_EDE_LOGS/make_output.txt
if [ $? != 0 ]
then
echo "Error: sipXecs build/install failed, see $EDE_LOGS/make_output.txt."
exit 9
fi
popd

# This is needed so often, we might as well make it easily available with "sudo /sbin/service sipxecs xxx",
# and started automatically after reboot.
sudo rm -rf /etc/init.d/sipxecs
sudo ln -s $FULL_INSTALL_PATH/etc/init.d/sipxecs /etc/init.d/sipxecs

# Cause the logs to be rotated.
sudo rm -rf /etc/logrotate.d/sipxchange
sudo ln -s $FULL_INSTALL_PATH/etc/logrotate.d/sipxchange /etc/logrotate.d/sipxchange
sudo rm -rf /etc/logrotate.d/freeswitch
sudo ln -s $FULL_INSTALL_PATH/etc/logrotate.d/freeswitch /etc/logrotate.d/freeswitch

# Adjust the TFTP/FTP directory.
TFTP_PATH=$FULL_INSTALL_PATH/var/sipxdata/configserver/phone/profile/tftproot
ruby -e 'path=""; ARGV[0].split("/").each {|x| path+=x+"/"; `sudo chmod g+x #{path}`}' $TFTP_PATH
sudo rm -rf /tftpboot
sudo ln -s $TFTP_PATH /tftpboot

# Clear any database contents that might be left over from the last install.
$FULL_INSTALL_PATH/bin/sipxconfig.sh --database drop create &> $FULL_PATH_EDE_LOGS/sipxconfig_drop_create.log
$FULL_INSTALL_PATH/bin/sipxconfig.sh --first-run &> $FULL_PATH_EDE_LOGS/sipxconfig_first-run.log

# Fix FreeSWITCH
sudo $FULL_INSTALL_PATH/bin/freeswitch.sh --configtest &> $FULL_PATH_EDE_LOGS/freeswitch_configtest.log

# Create some helpful links.
mkdir $LINKS
pushd $LINKS
ln -s $FULL_INSTALL_PATH/var/log/sipxpbx log
ln -s $FULL_INSTALL_PATH/var/sipxdata/configserver/phone/profile/tftproot tftproot
ln -s $FULL_INSTALL_PATH/var/sipxdata/sipdb sipdb
ln -s $FULL_INSTALL_PATH/etc/sipxpbx home
ln -s $FULL_INSTALL_PATH/bin bin
ln -s $FULL_INSTALL_PATH/share/sipxecs/process.d process.d
popd

# sipxecs-setup
$FULL_INSTALL_PATH/bin/sipxecs-setup

# Restart sipXecs twice.  This gets around the "httpd-sipxchange-common-ssl.conf: No
# such file or directory" error on first start, and I've also seen it fix the
# a "Resource Required" state for services.
echo ""
echo "Restarting sipXecs twice...."
srestart
sleep 10
srestart
sstatus

echo ""
echo "TO START     : sstart"
echo "TO STOP      : sstop"
echo "TO RESTART   : srestart"
echo "TO GET STATUS: sstatus"
echo ""
echo "ENV:"
cat env
echo ""
echo "DONE!"