经过最近的努力,终于将ucLinux2008R1.5-RC3运行了在新做的板子上。
2008-12-16 20:27
344 查看
U-Boot 1.1.6 (ADI-2008R1.5) (Dec 16 2008 - 07:12:19)
CPU: ADSP bf533-0.5 (Detected Rev: 0.5)
Board: BeiJing Tourtone System Co.,Ltd
Go......
Clock: VCO: 405 MHz, Core: 405 MHz, System: 101 MHz
RAM: 32 MB
Flash: 2.1 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 5 4 3 2 1 0
EEPROM @0x0 read: addr 01000000 off 40000 count 3670016 ... done
## Booting image at 01000000 ...
Image Name: Linux-2.6.22.19-ADI-2008R1.5-svn
Created: 2008-12-16 9:02:17 UTC
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 1964662 Bytes = 1.9 MB
Load Address: 00001000
Entry Point: 00142000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 142000
Linux version 2.6.22.19-ADI-2008R1.5-svn (root@colinux) (gcc version 4.1.2 (ADI svn)) #15 Tue Dec 16 04:02:09 EST 2008
Hardware Trace Active and Enabled
Blackfin support (C) 2004-2007 Analog Devices, Inc.
Compiled for ADSP-BF531 Rev 0.5
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 405 MHz core clock and 101 MHz System Clock
Board Memory: 32MB
Kernel Managed Memory: 32MB
Memory map:
text = 0x00001000-0x000edd40
rodata = 0x000ee000-0x0013071c
data = 0x00131000-0x00142000
stack = 0x00132000-0x00134000
init = 0x00142000-0x003d0000
bss = 0x003d0000-0x003de4d0
available = 0x003de4d0-0x01eff000
DMA Zone = 0x01f00000-0x02000000
NOMPU: setting up cplb tables for global access
Instruction Cache Enabled
Data Cache Enabled (write-through)
Built 1 zonelists. Total pages: 7874
Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,115200
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory available: 27480k/32768k RAM, (2616k init code, 947k kernel code, 394k data, 1024k dma, 304k reserved)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin Instruction SRAM: 16 KB (8 KB free)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
ezkit_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
smc91x: not found (-19).
bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Contoller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting the system clock to 2012-01-03 16:04:03 (1325606643)
Freeing unused kernel memory: 2616k freed
dma_alloc_init: dma_page @ 0x00145000 - 256 pages at 0x01f00000
hostname: not found
grep: not found
ifconfig: not found
inetd: not found
_____________________________________
a8888b. / Welcome to the uClinux distribution /
d888888b. / _ _ /
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ / // / |
8' .88 / | | | | _ /| | | | / / |
8`._.' Y8. / | |__ | | | | | |_| | / / |
d/ `8b. / /____||_|_| |_|/____|/_//_/ |
dP . Y8b. / For embedded processors including |
d8:' " `::88b / the Analog Devices Blackfin /
d8" 'Y88b /___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
/ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ /.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.4.1 (2008-12-14 10:39:27 EST) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/>
CPU: ADSP bf533-0.5 (Detected Rev: 0.5)
Board: BeiJing Tourtone System Co.,Ltd
Go......
Clock: VCO: 405 MHz, Core: 405 MHz, System: 101 MHz
RAM: 32 MB
Flash: 2.1 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 5 4 3 2 1 0
EEPROM @0x0 read: addr 01000000 off 40000 count 3670016 ... done
## Booting image at 01000000 ...
Image Name: Linux-2.6.22.19-ADI-2008R1.5-svn
Created: 2008-12-16 9:02:17 UTC
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 1964662 Bytes = 1.9 MB
Load Address: 00001000
Entry Point: 00142000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 142000
Linux version 2.6.22.19-ADI-2008R1.5-svn (root@colinux) (gcc version 4.1.2 (ADI svn)) #15 Tue Dec 16 04:02:09 EST 2008
Hardware Trace Active and Enabled
Blackfin support (C) 2004-2007 Analog Devices, Inc.
Compiled for ADSP-BF531 Rev 0.5
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 405 MHz core clock and 101 MHz System Clock
Board Memory: 32MB
Kernel Managed Memory: 32MB
Memory map:
text = 0x00001000-0x000edd40
rodata = 0x000ee000-0x0013071c
data = 0x00131000-0x00142000
stack = 0x00132000-0x00134000
init = 0x00142000-0x003d0000
bss = 0x003d0000-0x003de4d0
available = 0x003de4d0-0x01eff000
DMA Zone = 0x01f00000-0x02000000
NOMPU: setting up cplb tables for global access
Instruction Cache Enabled
Data Cache Enabled (write-through)
Built 1 zonelists. Total pages: 7874
Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,115200
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory available: 27480k/32768k RAM, (2616k init code, 947k kernel code, 394k data, 1024k dma, 304k reserved)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin Instruction SRAM: 16 KB (8 KB free)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
ezkit_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
smc91x: not found (-19).
bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Contoller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting the system clock to 2012-01-03 16:04:03 (1325606643)
Freeing unused kernel memory: 2616k freed
dma_alloc_init: dma_page @ 0x00145000 - 256 pages at 0x01f00000
hostname: not found
grep: not found
ifconfig: not found
inetd: not found
_____________________________________
a8888b. / Welcome to the uClinux distribution /
d888888b. / _ _ /
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ / // / |
8' .88 / | | | | _ /| | | | / / |
8`._.' Y8. / | |__ | | | | | |_| | / / |
d/ `8b. / /____||_|_| |_|/____|/_//_/ |
dP . Y8b. / For embedded processors including |
d8:' " `::88b / the Analog Devices Blackfin /
d8" 'Y88b /___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
/ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ /.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.4.1 (2008-12-14 10:39:27 EST) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/>
相关文章推荐
- 经过努力终于在虚拟机里运行android模拟器,并以域名方式访问物理机网站成功,ksoap调用c#webservice成功
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(5):'bf561.h'的问题
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(12):trace_buffer_init
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(23):PREEMPT_ACTIVE is too low
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(33):.l1.text
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(38):未命名union的问题
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(45):未命名union的后遗症
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(49):likely
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(60):KBUILD_MODNAME
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(75):Milestone:内核成功启动
- 设置代理服务器 经过不懈的努力,终于取得进展
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(78):又见internal error
- [导入]哈哈哈,好爽,经过几个礼拜的努力,终于把布料运算搞定了。
- 经过百般努力,终于用JSP写出FileUpload上传小程序
- 经过努力终于实现了远程FTP下载文件到本地的批处理
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(6):CONFIG_BFIN_KERNEL_CLOCK
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(13):ENDPROC
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(16):使用head.s做为入口点
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(18):_sdata
- uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(24):Gcc版本号