转帖:List of raw FTP commands
2008-12-12 11:08
363 查看
You are on the nsftools.com site
This page originally appeared at http://www.dreamhaven.org/ftp-raw.html, but the last time I looked it wasn't there any more, so I posted a local copy for you here. If you were really looking for a list of commands for the Microsoft Windows command-line FTP client, please look here instead.
Note that commands marked with a * are not implemented in a number of FTP servers.
CWD - change working directory
DELE - delete a remote file
LIST - list remote files
MDTM - return the modification time of a file
MKD - make a remote directory
NLST - name list of remote directory
PASS - send password
PASV - enter passive mode
PORT - open a data port
PWD - print working directory
QUIT - terminate the connection
RETR - retrieve a remote file
RMD - remove a remote directory
RNFR - rename from
RNTO - rename to
SITE - site-specific commands
SIZE - return the size of a file
STOR - store a file on the remote host
TYPE - set transfer type
USER - send username
APPE - append to a remote file
CDUP - CWD to the parent of the current directory
HELP - return help on using the server
MODE - set transfer mode
NOOP - do nothing
REIN* - reinitialize the connection
STAT - return server status
STOU - store a file uniquely
STRU - set file transfer structure
SYST - return system type
Aborts a file transfer currently in progress.
This command is used to send account information on systems that require it. Typically sent after a PASS command.
Allocates sufficient storage space to receive a file. If the maximum size of a record also needs to be known, that is sent as a second numeric parameter following a space, the capital letter "R", and another space.
Append data to the end of a file on the remote host. If the file does not already exist, it is created. This command must be preceded by a PORT or PASV command so that the server knows where to receive data from.
Makes the parent of the current directory be the current directory.
Makes the given directory be the current directory on the remote host.
Deletes the given file on the remote host.
If a command is given, returns help on that command; otherwise, returns general help for the FTP server (usually a list of supported commands).
If remote-filespec refers to a file, sends information about that file. If remote-filespec refers to a directory, sends information about each file in that directory. remote-filespec defaults to the current directory. This command must be preceded by a PORT or PASV command.
Returns the last-modified time of the given file on the remote host in the format "YYYYMMDDhhmmss": YYYY is the four-digit year, MM is the month from 01 to 12, DD is the day of the month from 01 to 31, hh is the hour from 00 to 23, mm is the minute from 00 to 59, and ss is the second from 00 to 59.
Creates the named directory on the remote host.
Sets the transfer mode to one of:
S - Stream
B - Block
C - Compressed
The default mode is Stream.
Returns a list of filenames in the given directory (defaulting to the current directory), with no other information. Must be preceded by a PORT or PASV command.
Does nothing except return a response.
After sending the USER command, send this command to complete the login process. (Note, however, that an ACCT command may have to be used on some systems.)
Tells the server to enter "passive mode". In passive mode, the server will wait for the client to establish a connection with it rather than attempting to connect to a client-specified port. The server will respond with the address of the port it is listening on, with a message like:
227 Entering Passive Mode (a1,a2,a3,a4,p1,p2)
where a1.a2.a3.a4 is the IP address and p1*256+p2 is the port number.
Specifies the host and port to which the server should connect for the next file transfer. This is interpreted as IP address a1.a2.a3.a4, port p1*256+p2.
Returns the name of the current directory on the remote host.
Terminates the command connection.
Reinitializes the command connection - cancels the current user/password/account information. Should be followed by a USER command for another login.
Sets the point at which a file transfer should start; useful for resuming interrupted transfers. For nonstructured files, this is simply a decimal number. This command must immediately precede a data transfer command (RETR or STOR only); i.e. it must come after any PORT or PASV command.
Begins transmission of a file from the remote host. Must be preceded by either a PORT command or a PASV command to indicate where the server should send data.
Deletes the named directory on the remote host.
Used when renaming a file. Use this command to specify the file to be renamed; follow it with an RNTO command to specify the new name for the file.
Used when renaming a file. After sending an RNFR command to specify the file to rename, send this command to specify the new name for the file.
Executes a site-specific command.
Returns the size of the remote file as a decimal number.
If invoked without parameters, returns general status information about the FTP server process. If a parameter is given, acts like the LIST command, except that data is sent over the control connection (no PORT or PASV command is required).
Begins transmission of a file to the remote site. Must be preceded by either a PORT command or a PASV command so the server knows where to accept data from.
Begins transmission of a file to the remote site; the remote filename will be unique in the current directory. The response from the server will include the filename.
Sets the file structure for transfer to one of:
F - File (no structure)
R - Record structure
P - Page structure
The default structure is File.
Returns a word identifying the system, the word "Type:", and the default transfer type (as would be set by the TYPE command). For example: UNIX Type: L8
Sets the type of file to be transferred. type-character can be any of:
A - ASCII text
E - EBCDIC text
I - image (binary data)
L - local format
For A and E, the second-type-character specifies how the text should be interpreted. It can be:
N - Non-print (not destined for printing). This is the default if second-type-character is omitted.
T - Telnet format control (<CR>, <FF>, etc.)
C - ASA Carriage Control
For L, the second-type-character specifies the number of bits per byte on the local system, and may not be omitted.
Send this command to begin the login process. username should be a valid username on the system, or "anonymous" to initiate an anonymous login.
This page originally appeared at http://www.dreamhaven.org/ftp-raw.html, but the last time I looked it wasn't there any more, so I posted a local copy for you here. If you were really looking for a list of commands for the Microsoft Windows command-line FTP client, please look here instead.
List of raw FTP commands
(Warning: this is a technical document, not necessary for most FTP use.)Note that commands marked with a * are not implemented in a number of FTP servers.
Common commands
ABOR - abort a file transferCWD - change working directory
DELE - delete a remote file
LIST - list remote files
MDTM - return the modification time of a file
MKD - make a remote directory
NLST - name list of remote directory
PASS - send password
PASV - enter passive mode
PORT - open a data port
PWD - print working directory
QUIT - terminate the connection
RETR - retrieve a remote file
RMD - remove a remote directory
RNFR - rename from
RNTO - rename to
SITE - site-specific commands
SIZE - return the size of a file
STOR - store a file on the remote host
TYPE - set transfer type
USER - send username
Less common commands
ACCT* - send account informationAPPE - append to a remote file
CDUP - CWD to the parent of the current directory
HELP - return help on using the server
MODE - set transfer mode
NOOP - do nothing
REIN* - reinitialize the connection
STAT - return server status
STOU - store a file uniquely
STRU - set file transfer structure
SYST - return system type
ABOR
Syntax: ABORAborts a file transfer currently in progress.
ACCT*
Syntax: ACCT account-infoThis command is used to send account information on systems that require it. Typically sent after a PASS command.
ALLO
Syntax: ALLO size [R max-record-size]Allocates sufficient storage space to receive a file. If the maximum size of a record also needs to be known, that is sent as a second numeric parameter following a space, the capital letter "R", and another space.
APPE
Syntax: APPE remote-filenameAppend data to the end of a file on the remote host. If the file does not already exist, it is created. This command must be preceded by a PORT or PASV command so that the server knows where to receive data from.
CDUP
Syntax: CDUPMakes the parent of the current directory be the current directory.
CWD
Syntax: CWD remote-directoryMakes the given directory be the current directory on the remote host.
DELE
Syntax: DELE remote-filenameDeletes the given file on the remote host.
HELP
Syntax: HELP [command]If a command is given, returns help on that command; otherwise, returns general help for the FTP server (usually a list of supported commands).
LIST
Syntax: LIST [remote-filespec]If remote-filespec refers to a file, sends information about that file. If remote-filespec refers to a directory, sends information about each file in that directory. remote-filespec defaults to the current directory. This command must be preceded by a PORT or PASV command.
MDTM
Syntax: MDTM remote-filenameReturns the last-modified time of the given file on the remote host in the format "YYYYMMDDhhmmss": YYYY is the four-digit year, MM is the month from 01 to 12, DD is the day of the month from 01 to 31, hh is the hour from 00 to 23, mm is the minute from 00 to 59, and ss is the second from 00 to 59.
MKD
Syntax: MKD remote-directoryCreates the named directory on the remote host.
MODE
Syntax: MODE mode-characterSets the transfer mode to one of:
S - Stream
B - Block
C - Compressed
The default mode is Stream.
NLST
Syntax: NLST [remote-directory]Returns a list of filenames in the given directory (defaulting to the current directory), with no other information. Must be preceded by a PORT or PASV command.
NOOP
Syntax: NOOPDoes nothing except return a response.
PASS
Syntax: PASS passwordAfter sending the USER command, send this command to complete the login process. (Note, however, that an ACCT command may have to be used on some systems.)
PASV
Syntax: PASVTells the server to enter "passive mode". In passive mode, the server will wait for the client to establish a connection with it rather than attempting to connect to a client-specified port. The server will respond with the address of the port it is listening on, with a message like:
227 Entering Passive Mode (a1,a2,a3,a4,p1,p2)
where a1.a2.a3.a4 is the IP address and p1*256+p2 is the port number.
PORT
Syntax: PORT a1,a2,a3,a4,p1,p2Specifies the host and port to which the server should connect for the next file transfer. This is interpreted as IP address a1.a2.a3.a4, port p1*256+p2.
PWD
Syntax: PWDReturns the name of the current directory on the remote host.
QUIT
Syntax: QUITTerminates the command connection.
REIN*
Syntax: REINReinitializes the command connection - cancels the current user/password/account information. Should be followed by a USER command for another login.
REST
Syntax: REST positionSets the point at which a file transfer should start; useful for resuming interrupted transfers. For nonstructured files, this is simply a decimal number. This command must immediately precede a data transfer command (RETR or STOR only); i.e. it must come after any PORT or PASV command.
RETR
Syntax: RETR remote-filenameBegins transmission of a file from the remote host. Must be preceded by either a PORT command or a PASV command to indicate where the server should send data.
RMD
Syntax: RMD remote-directoryDeletes the named directory on the remote host.
RNFR
Syntax: RNFR from-filenameUsed when renaming a file. Use this command to specify the file to be renamed; follow it with an RNTO command to specify the new name for the file.
RNTO
Syntax: RNTO to-filenameUsed when renaming a file. After sending an RNFR command to specify the file to rename, send this command to specify the new name for the file.
SITE*
Syntax: SITE site-specific-commandExecutes a site-specific command.
SIZE
Syntax: SIZE remote-filenameReturns the size of the remote file as a decimal number.
STAT
Syntax: STAT [remote-filespec]If invoked without parameters, returns general status information about the FTP server process. If a parameter is given, acts like the LIST command, except that data is sent over the control connection (no PORT or PASV command is required).
STOR
Syntax: STOR remote-filenameBegins transmission of a file to the remote site. Must be preceded by either a PORT command or a PASV command so the server knows where to accept data from.
STOU
Syntax: STOUBegins transmission of a file to the remote site; the remote filename will be unique in the current directory. The response from the server will include the filename.
STRU
Syntax: STRU structure-characterSets the file structure for transfer to one of:
F - File (no structure)
R - Record structure
P - Page structure
The default structure is File.
SYST
Syntax: SYSTReturns a word identifying the system, the word "Type:", and the default transfer type (as would be set by the TYPE command). For example: UNIX Type: L8
TYPE
Syntax: TYPE type-character [second-type-character]Sets the type of file to be transferred. type-character can be any of:
A - ASCII text
E - EBCDIC text
I - image (binary data)
L - local format
For A and E, the second-type-character specifies how the text should be interpreted. It can be:
N - Non-print (not destined for printing). This is the default if second-type-character is omitted.
T - Telnet format control (<CR>, <FF>, etc.)
C - ASA Carriage Control
For L, the second-type-character specifies the number of bits per byte on the local system, and may not be omitted.
USER
Syntax: USER usernameSend this command to begin the login process. username should be a valid username on the system, or "anonymous" to initiate an anonymous login.
相关文章推荐
- List of raw FTP commands
- List of raw FTP commands
- List of raw FTP commands
- List of FTP commands for the Microsoft command-line FTP client
- List of FTP user commands
- The list of Vim commands
- Command Line -- List of command line commands
- A categorized list of Windows CMD commands
- List of all MySQL commands
- FTPrep, 19 Remove Nth Node From End of List
- List of FTP Sever/Client Software
- List of FTP server return codes
- 怎么把ftp_rawlist里的返回的文本定义成数组呢,我有办法
- The list of Vim commands
- List of Solaris commands for process management
- matlab commands and functions list
- 重拾编程之路--jeetcode(java)-- Remove Nth Node From End of List
- Remove Nth Node From End of List
- How to send a list of files over a socket in Java
- leetcode: Remove Nth Node From End of List