您的位置:首页 > 运维架构 > Linux

DELL R200服务器Centos5安装Dell OpenManage Server Administrator

2008-12-02 16:57 841 查看
客户新购买了两台DELL R200 服务器。两块160G的硬盘。使用DELL 的sas 6/ir 配置raid1. 安装的系统是:centos5.2
系统安装成功后。配置Dell OpenManage Server Administrator。
1.使用root登陆服务器。
[root@localhost ~]# mount /dev/cdrom /mnt
把光驱挂在/mnt 下。
2.进入/mnt目录下
[root@localhost ~]# cd /mnt/SYSMGMT/srvadmin/
[root@localhost srvadmin]# cp -R linux/ /home/admin/
把linxu目录拷贝到/home/admin/下。
3.进入/home/admin/linux
[root@localhost ~]#cd /home/admin/linux
设置 support.s目录755的权限。
[root@localhost linux]# chmod -R 755 support.s/*
4.编辑srvadmin-install.sh文件。
[root@localhost support.s]# vi srvadmin-install.sh
― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―
# Check if operating system is RHEL3.
if [ -f /etc/redhat-release ] && [ `grep -c "Taroon" /etc/redhat-release` -gt 0 ]; then
GBL_OS_TYPE=${GBL_OS_TYPE_RHEL3}
GBL_OS_TYPE_STRING="RHEL3"

# Else check if operating system is RHEL4.
elif [ -f /etc/redhat-release ] && [ `grep -c "Nahant" /etc/redhat-release` -gt 0 ]; then
GBL_OS_TYPE=${GBL_OS_TYPE_RHEL4}
GBL_OS_TYPE_STRING="RHEL4"

# Else check if operating system is RHEL5.
elif [ -f /etc/redhat-release ] && [ `grep -c "Tikanga" /etc/redhat-release` -gt 0 ]; then
GBL_OS_TYPE=${GBL_OS_TYPE_RHEL5}
GBL_OS_TYPE_STRING="RHEL5"
― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―
修改grep -c "Tikanga" /etc/redhat-release` -gt 0 为grep -c "CentOS release 5.2 (Final)" /etc/redhat-release` -gt 0。
系统的版本可以从/etc/redhat-releasec查到。修改后保存文件。
服务器的版本。
[root@localhost support.s]# cat /etc/redhat-release
CentOS release 5.2 (Final)
5.开始安装:
[root@localhost support.s]# ./srvadmin-install.sh
##############################################
Server Administrator Custom Install Utility
##############################################
Components for Server Administrator Managed Node Software:
[ ] 1. Server Administrator CLI
[ ] 2. Server Administrator Web Server
[ ] 3. Storage Management
[ ] 4. All
Enter the number to select a component from the above list.
Enter q to quit.
Enter : 4 我选择全部安装
##############################################
Server Administrator Custom Install Utility
##############################################
Selected Options
- All
Dependencies
- Server Administrator CLI
- Server Administrator Web Server
- Storage Management
Components for Server Administrator Managed Node Software:
[x] 1. Server Administrator CLI
[x] 2. Server Administrator Web Server
[x] 3. Storage Management
[x] 4. All
Enter the number to select a component from the above list.
Enter c to copy selected components to destination folder.
Enter i to install the selected components.
Enter r to reset selection and start over.
Enter q to quit.
Enter : i
Default install location is: /opt/dell/srvadmin
Do you want to change it?
Press ('y' for yes | 'Enter' for default): Enter'
Installing the selected packages.
warning: srvadmin-cm-5.5.0-364.i386.rpm: Header V3 DSA signature: NOKEY, key ID 23b66a9d
Preparing... ########################################### [100%]
1:srvadmin-omilcore ########################################### [ 8%]
To start all installed services without a reboot,
enter the following command: srvadmin-services.sh start
2:srvadmin-syscheck ########################################### [ 15%]
3:srvadmin-deng ########################################### [ 23%]
4:srvadmin-omauth ########################################### [ 31%]
5:srvadmin-omacore ########################################### [ 38%]
6:srvadmin-jre ########################################### [ 46%]
7:srvadmin-ipmi ########################################### [ 54%]
8:srvadmin-hapi ########################################### [ 62%]
9:srvadmin-isvc ########################################### [ 69%]
10:srvadmin-cm ########################################### [ 77%]
11:srvadmin-iws ########################################### [ 85%]
12:srvadmin-omhip ########################################### [ 92%]
13:srvadmin-storage ########################################### [100%]
Do you want the Server Administrator services started?
Press ('y' for yes | 'Enter' to exit): y
Starting mptctl:
Waiting for mptctl driver registration to complete:
[ OK ]
Starting Systems Management Device Drivers:
Starting dell_rbu: [ OK ]
Starting ipmi driver: [ OK ]
Starting Systems Management Data Engine:
Starting dsm_sa_datamgr32d: [ OK ]
Starting dsm_sa_eventmgr32d: [ OK ]
Starting DSM SA Shared Services: [ OK ]
Starting DSM SA Connection Service: [ OK ]

6.访问 https://服务器名或ip地址:1311 出现成功界面。使用用户名及密码登陆吧。



如果安装出现错误。请安装相应的软件包
如:
warning: srvadmin-cm-5.5.0-364.i386.rpm: Header V3 DSA signature: NOKEY, key ID 23b66a9d
error: Failed dependencies:
libstdc++.so.5 is needed by srvadmin-iws-5.5.0-364.i386
libstdc++.so.5(GLIBCPP_3.2) is needed by srvadmin-iws-5.5.0-364.i386
libstdc++.so.5 is needed by srvadmin-omacore-5.5.0-364.i386
libstdc++.so.5(GLIBCPP_3.2) is needed by srvadmin-omacore-5.5.0-364.i386
libstdc++.so.5(GLIBCPP_3.2.2) is needed by srvadmin-omacore-5.5.0-364.i386
- Installation of some of the packages have failed.
- Please refer to 'readme_ins.txt' file for more details.
- The readme_ins.txt can be found in srvadmin/docs/readme folder
安装
[root@localhost opt]# yum -y install compat-libstdc++-33
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package compat-libstdc++-33.i386 0:3.2.3-61 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
compat-libstdc++-33 i386 3.2.3-61 base 232 k
Transaction Summary
=============================================================================
Install 1 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 232 k
Downloading Packages:
(1/1): compat-libstdc++-3 100% |=========================| 232 kB 00:01
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID e8562897
Importing GPG key 0xE8562897 "CentOS-5 Key (CentOS 5 Official Signing Key) <centos-5-key@centos.org>" from http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: compat-libstdc++-33 ######################### [1/1]
Installed: compat-libstdc++-33.i386 0:3.2.3-61
Complete!
内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理 点击这里给我发消息
标签: