Catalyst 2950/2960 密码恢复方法
2008-07-31 14:33
232 查看
总部发来的交换机居然密码错误。
在网上找了个文章。
1.连接好console线;
2.拔电源,按住mode键插电源,直至1x口LED灯亮两秒以上方可松开mode键,flash初始化过程中断,系统进入“switch:”提示符状态; (正常启动时候按Ctrl+Break也可达到相同效果);
3.执行flash_init
load_helper
dir flash: (一定要有冒号)
rename flash:config.text flash:config.old (将startup-config文件改名)
boot (继续引导)
4.系统提示是否进行初始化,选择no;
5.执行enable
rename flash:config.old flash:config.text (恢复startup-config文件)
copy flash:config.text system:running-config (恢复running-config文件)
conf t enable secret xxxxxx (重设密码)
end
copy run start
在网上找了个文章。
1.连接好console线;
2.拔电源,按住mode键插电源,直至1x口LED灯亮两秒以上方可松开mode键,flash初始化过程中断,系统进入“switch:”提示符状态; (正常启动时候按Ctrl+Break也可达到相同效果);
3.执行flash_init
load_helper
dir flash: (一定要有冒号)
rename flash:config.text flash:config.old (将startup-config文件改名)
boot (继续引导)
4.系统提示是否进行初始化,选择no;
5.执行enable
rename flash:config.old flash:config.text (恢复startup-config文件)
copy flash:config.text system:running-config (恢复running-config文件)
conf t enable secret xxxxxx (重设密码)
end
copy run start
相关文章推荐
- Catalyst 2950/2960 密码恢复方法
- 一、Catalyst 2950系列交换机密码恢复
- Catalyst 2950的密码恢复原理
- Catalyst交换机密码恢复
- Cisco catalyst 2950交换机的密码恢复
- mysql5.6忘记密码的恢复方法
- 思科交换机密码恢复方法介绍
- mysql密码丢失时恢复密码的方法!
- 华为5680T密码恢复方法
- cisco3750-12G交换机密码恢复方法
- MySQL忘记密码恢复密码的实现方法
- 忘记密码 密码保护SqlServer备份文件恢复方法
- 忘记drupal7的管理员密码的恢复方法
- 2950系列交换机密码恢复过程
- cisco 2950密码恢复
- MySQL忘记密码恢复密码的实现方法
- 忘记密码 密码保护SqlServer备份文件恢复方法
- cisco 2960交换机密码恢复教程
- 不用第三方软件的方法来恢复管理员密码