openssh生成密钥及使用方法,以及puttygen工具自由转换私钥
2008-07-23 02:33
686 查看
前 言
SSH服务和Telnet服务一样,通过远程登录登录到系统,在远程操控系统。但它与Telnet的不同点就是:Telnet在传输的过程中是平文传输,而SSH是将传输内容加密,在传送的过程中保证了传送内容的保密性,从而提高了系统的安全性。
在这里,我们不准备将SSH服务作为用户上传下载文件的工具。我们只用SSH服务的开通为远程管理系统提供方便。另外在用户认证方式上,为了服务器和用户的安全,禁止用户密码的认证方式,而基于“钥匙”的方式。
SSH相关配置文件的修改
首先修改SSH的配置文件。如下:
[root@sample ~]# vi /etc/ssh/sshd_config ← 用vi打开SSH的配置文件
#Protocol 2,1 ← 找到此行将行头“#”删除,再将行末的“,1”删除,只允许SSH2方式的连接
↓
Protocol 2 ← 修改后变为此状态,仅使用SSH2
#ServerKeyBits 768 ← 找到这一行,将行首的“#”去掉,并将768改为1024
↓
ServerKeyBits 1024 ← 修改后变为此状态,将ServerKey强度改为1024比特
#PermitRootLogin yes ← 找到这一行,将行首的“#”去掉,并将yes改为no
↓
PermitRootLogin no ← 修改后变为此状态,不允许用root进行登录
#PassWordAuthentication yes ← 找到这一行,将yes改为no
↓
PasswordAuthentication no ← 修改后变为此状态,不允许密码方式的登录
#PermitEmptyPasswords no ← 找到此行将行头的“#”删除,不允许空密码登录
↓
PermitEmptyPasswords no ← 修改后变为此状态,禁止空密码进行登录
然后保存并退出。(vi保存退出的命令为ZZ)
因为我们只想让SSH服务为管理系统提供方便,所以在不通过外网远程管理系统的情况下,只允许内网客户端通过SSH登录到服务器,以最大限度减少不安全因素。设置方法如下:
[root@sample ~]# vi /etc/hosts.deny ← 修改屏蔽规则,在文尾添加相应行
#
# hosts.deny This file describes the names of the hosts which are
# *not* allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
# The portmap line is redundant, but it is left to remind you that
# the new secure portmap uses hosts.deny and hosts.allow. In particular
# you should know that NFS uses portmap!
sshd: ALL ← 添加这一行,屏蔽来自所有的SSH连接请求
[root@sample ~]# vi /etc/hosts.allow ← 修改允许规则,在文尾添加相应行
#
# hosts.allow This file describes the names of the hosts which are
# allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
sshd: 192.168.0. ← 添加这一行,只允许来自内网的SSH连接请求
重新启动SSH服务
在修改完SSH的配置文件后,需要重新启动SSH服务才能使新的设置生效。
[root@sample ~]# /etc/rc.d/init.d/sshd restart ← 重新启动SSH服务器
Stopping sshd: [ OK ]
Starting sshd: [ OK ] ← SSH服务器重新启动成功
这时,在远程终端(自用PC等等)上,用SSH客户端软件以正常的密码的方式是无法登录服务器的。为了在客户能够登录到服务器,我们接下来建立SSH用的公钥与私钥,以用于客户端以“钥匙”的方式登录SSH服务器。
SSH2的公钥与私钥的建立
登录为一个一般用户,基于这个用户建立公钥与私钥。(这里以centospub用户为例)
[root@sample ~]# su - centospub ← 登录为一般用户centospub
[centospub@sample ~]$ ssh-keygen -t rsa ← 建立公钥与私钥
Generating public/private rsa key pair.
Enter file in which to save the key (/home/centospub/.ssh/id_rsa): ← 钥匙的文件名,这里保持默认直接回车
Created Directory '/home/centospub/.ssh'
Enter passphrase (empty for no passphrase): ← 输入口令
Enter same passphrase again: ← 再次输入口令
Your identification has been saved in /home/kaz/.ssh/id_rsa.
Your public key has been saved in /home/kaz/.ssh/id_rsa.pub.
The key fingerprint is:
tf:rs:e3:7s:28:59:5s:93:fe:33:84:01:cj:65:3b:8e centospub@sample.centospub.com
然后确认一下公钥与密钥的建立,以及对应于客户端的一些处理。
[centospub@sample ~]$ cd ~/.ssh ← 进入用户SSH配置文件的目录
[centospub@sample .ssh]$ ls -l ← 列出文件
total 16
-rw------- 1 centospub centospub 951 Sep 4 19:22 id_rsa ← 确认私钥已被建立
-rw-r--r-- 1 centospub centospub 241 Sep 4 19:22 id_rsa.pub ← 确认公钥已被建立
[centospub@sample .ssh]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys ← 公钥内容输出到相应文件中
[centospub@sample .ssh]$ rm -f ~/.ssh/id_rsa.pub ← 删除原来的公钥文件
[centospub@sample .ssh]$ chmod 400 ~/.ssh/authorized_keys ← 将新建立的公钥文件属性设置为400
以上内容引用 http://www.hackhome.com/InfoView/Article_141084.html
用puttygen.exe导入私钥id_rsa,点Save private key,保存成putty.exe可以用的私钥,这样就可以使用putty.exe加载刚才转换好的私钥。
反之,我们也可以将putty生成的私钥,导出OpenSSH key,这样就可以在linux下用ssh命令连接linux服务器,命令如下:
# chmod 600 id_rsa
# ssh -i id_rsa uu@222.222.222.222 -p 66
这里要注意的是
.ssh目录是700权限
authorized_keys公钥是400权限
用ssh连接用的私钥是600权限
SSH服务和Telnet服务一样,通过远程登录登录到系统,在远程操控系统。但它与Telnet的不同点就是:Telnet在传输的过程中是平文传输,而SSH是将传输内容加密,在传送的过程中保证了传送内容的保密性,从而提高了系统的安全性。
在这里,我们不准备将SSH服务作为用户上传下载文件的工具。我们只用SSH服务的开通为远程管理系统提供方便。另外在用户认证方式上,为了服务器和用户的安全,禁止用户密码的认证方式,而基于“钥匙”的方式。
SSH相关配置文件的修改
首先修改SSH的配置文件。如下:
[root@sample ~]# vi /etc/ssh/sshd_config ← 用vi打开SSH的配置文件
#Protocol 2,1 ← 找到此行将行头“#”删除,再将行末的“,1”删除,只允许SSH2方式的连接
↓
Protocol 2 ← 修改后变为此状态,仅使用SSH2
#ServerKeyBits 768 ← 找到这一行,将行首的“#”去掉,并将768改为1024
↓
ServerKeyBits 1024 ← 修改后变为此状态,将ServerKey强度改为1024比特
#PermitRootLogin yes ← 找到这一行,将行首的“#”去掉,并将yes改为no
↓
PermitRootLogin no ← 修改后变为此状态,不允许用root进行登录
#PassWordAuthentication yes ← 找到这一行,将yes改为no
↓
PasswordAuthentication no ← 修改后变为此状态,不允许密码方式的登录
#PermitEmptyPasswords no ← 找到此行将行头的“#”删除,不允许空密码登录
↓
PermitEmptyPasswords no ← 修改后变为此状态,禁止空密码进行登录
然后保存并退出。(vi保存退出的命令为ZZ)
因为我们只想让SSH服务为管理系统提供方便,所以在不通过外网远程管理系统的情况下,只允许内网客户端通过SSH登录到服务器,以最大限度减少不安全因素。设置方法如下:
[root@sample ~]# vi /etc/hosts.deny ← 修改屏蔽规则,在文尾添加相应行
#
# hosts.deny This file describes the names of the hosts which are
# *not* allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
# The portmap line is redundant, but it is left to remind you that
# the new secure portmap uses hosts.deny and hosts.allow. In particular
# you should know that NFS uses portmap!
sshd: ALL ← 添加这一行,屏蔽来自所有的SSH连接请求
[root@sample ~]# vi /etc/hosts.allow ← 修改允许规则,在文尾添加相应行
#
# hosts.allow This file describes the names of the hosts which are
# allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
sshd: 192.168.0. ← 添加这一行,只允许来自内网的SSH连接请求
重新启动SSH服务
在修改完SSH的配置文件后,需要重新启动SSH服务才能使新的设置生效。
[root@sample ~]# /etc/rc.d/init.d/sshd restart ← 重新启动SSH服务器
Stopping sshd: [ OK ]
Starting sshd: [ OK ] ← SSH服务器重新启动成功
这时,在远程终端(自用PC等等)上,用SSH客户端软件以正常的密码的方式是无法登录服务器的。为了在客户能够登录到服务器,我们接下来建立SSH用的公钥与私钥,以用于客户端以“钥匙”的方式登录SSH服务器。
SSH2的公钥与私钥的建立
登录为一个一般用户,基于这个用户建立公钥与私钥。(这里以centospub用户为例)
[root@sample ~]# su - centospub ← 登录为一般用户centospub
[centospub@sample ~]$ ssh-keygen -t rsa ← 建立公钥与私钥
Generating public/private rsa key pair.
Enter file in which to save the key (/home/centospub/.ssh/id_rsa): ← 钥匙的文件名,这里保持默认直接回车
Created Directory '/home/centospub/.ssh'
Enter passphrase (empty for no passphrase): ← 输入口令
Enter same passphrase again: ← 再次输入口令
Your identification has been saved in /home/kaz/.ssh/id_rsa.
Your public key has been saved in /home/kaz/.ssh/id_rsa.pub.
The key fingerprint is:
tf:rs:e3:7s:28:59:5s:93:fe:33:84:01:cj:65:3b:8e centospub@sample.centospub.com
然后确认一下公钥与密钥的建立,以及对应于客户端的一些处理。
[centospub@sample ~]$ cd ~/.ssh ← 进入用户SSH配置文件的目录
[centospub@sample .ssh]$ ls -l ← 列出文件
total 16
-rw------- 1 centospub centospub 951 Sep 4 19:22 id_rsa ← 确认私钥已被建立
-rw-r--r-- 1 centospub centospub 241 Sep 4 19:22 id_rsa.pub ← 确认公钥已被建立
[centospub@sample .ssh]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys ← 公钥内容输出到相应文件中
[centospub@sample .ssh]$ rm -f ~/.ssh/id_rsa.pub ← 删除原来的公钥文件
[centospub@sample .ssh]$ chmod 400 ~/.ssh/authorized_keys ← 将新建立的公钥文件属性设置为400
以上内容引用 http://www.hackhome.com/InfoView/Article_141084.html
用puttygen.exe导入私钥id_rsa,点Save private key,保存成putty.exe可以用的私钥,这样就可以使用putty.exe加载刚才转换好的私钥。
反之,我们也可以将putty生成的私钥,导出OpenSSH key,这样就可以在linux下用ssh命令连接linux服务器,命令如下:
# chmod 600 id_rsa
# ssh -i id_rsa uu@222.222.222.222 -p 66
这里要注意的是
.ssh目录是700权限
authorized_keys公钥是400权限
用ssh连接用的私钥是600权限
相关文章推荐
- window10使用命令ssh工具生成github开源中国需要的ssh密钥以及转换为ppk让tortriseGit工具支持它
- 批量部署ssh私钥认证以及pssh工具使用方法
- 批量部署ssh私钥认证以及pssh工具使用方法
- 批量部署ssh私钥认证以及pssh工具使用方法
- 批量部署ssh私钥认证以及pssh工具使用方法
- 使用mybatis自带工具,自动生成表对应domain、mapper.xml以及dao
- 14章类型信息-之类型转换前先做检查--之使用类字面常量--类名.class--以及动态instanceof(isInstance方法)----递归计数(计算各个类的个数)
- linux下性能监控工具Nmon的使用以及通过nmon_analyse生成分析报表
- 使用OpenSSL生成私钥(Private Key)以及根据Private Key创建证书
- RSA 密钥生成工具,以及出现的问题
- pandas的to_datetime时间转换使用方法以及学习的心得
- 使用jxl工具包生成Excel以及读取Excel的方法
- 把Java生成的RSA公钥、私钥转换成.NET使用的XML格式
- 几种快速将数组转换为List的方法,使用Arrays,Collections这两个工具类。
- ActiveMQ SSL应用之二 使用keytool工具生成密钥和证书文件
- 使用openssl工具生成密钥
- MAC OS下使用OpenSSL生成私钥和公钥的方法
- 【工具】使用反射为类快速生成toString方法
- 调试 Android* x86 应用程序的方法以及要使用的工具
- ETL工具kettle与JAVA结合使用程序生成转换