CCNA(Stand-ALONE)Lab 22-Introduction to the Switch
2008-04-20 08:51
591 查看
Objective: View some basic areas of a Cisco Catalyst 1900 switch.
Lab Equipment: Switch 1 from the eSwitches menu
Background Reading: Lab Primer Lesson 11: Switches
1. Connect to Switch 1. You should see the user mode prompt.
>
2. Enter the command to display the IOS version of the switch.
>show version
What version of the IOS is running? _______________________
What is the model number of the switch? ___________________
What is the Base Ethernet Address of the switch? _____________
3. Display the interfaces of the switch.
>show interfaces
How many of the interfaces are 10 Mbps? ___________________
How many ports are 100 Mbps Fast Ethernet? ________________
4. Enter the command to view the MAC address table.
>show mac-address-table
How many dynamic entries have been learned? _______________
5. Display the running configuration.
#show running-config
*****************************************************************
Above:CCNA(Stand-ALONE)Lab 21-ISDN
Next:CCNA(Stand-ALONE)Lab 23-Introduction to Basic Switch Commands
Lab Equipment: Switch 1 from the eSwitches menu
Background Reading: Lab Primer Lesson 11: Switches
1. Connect to Switch 1. You should see the user mode prompt.
>
2. Enter the command to display the IOS version of the switch.
>show version
What version of the IOS is running? _______________________
What is the model number of the switch? ___________________
What is the Base Ethernet Address of the switch? _____________
3. Display the interfaces of the switch.
>show interfaces
How many of the interfaces are 10 Mbps? ___________________
How many ports are 100 Mbps Fast Ethernet? ________________
4. Enter the command to view the MAC address table.
>show mac-address-table
How many dynamic entries have been learned? _______________
5. Display the running configuration.
#show running-config
*****************************************************************
Above:CCNA(Stand-ALONE)Lab 21-ISDN
Next:CCNA(Stand-ALONE)Lab 23-Introduction to Basic Switch Commands
相关文章推荐
- CCNA(Stand-ALONE)Lab 3-Introduction to the Basic Show Commands
- CCNA(Stand-ALONE)Lab 23-Introduction to Basic Switch Commands
- CCNA(Stand-ALONE)Lab 9-Introduction to IP
- CCNA(Stand-ALONE)Lab2-Introduction to the Basic User Interface
- CCNA(Stand-ALONE)Lab 8-Introduction to Interface configuration
- CCNA(Stand-ALONE)Lab1-Connecting to a Router
- CCNA(Stand-ALONE)Lab 13-RIP
- CCNA(Stand-ALONE)Lab 4-CDP
- CCNA(Stand-ALONE)Lab 5-Extended Basics
- CCNA(Stand-ALONE)Lab 11-Creating a Host Table
- CCNA(Stand-ALONE)Lab 16-PPP With CHAP Authentication
- CCNA(Stand-ALONE)Lab 20-Copying and Pasting configurations
- CCNA(Stand-ALONE)Lab 24-Frame Relay
- CCNA(Stand-ALONE)Lab 29-Extended Access Lists
- CCNA(Stand-ALONE)Lab 26-Frame Relay Full Mesh Topology
- CCNA(Stand-ALONE)Lab 27-Standard Access Lists
- CCNA(Stand-ALONE)Lab 6-Banner MOTD
- CCNA(Stand-ALONE)Lab 12-Static Routes
- CCNA(Stand-ALONE)Lab 15-IGRP
- CCNA(Stand-ALONE)Lab 21-ISDN