CCNA(Stand-ALONE)Lab1-Connecting to a Router
2008-04-02 16:30
543 查看
Objective: Become familiar with the Cisco Router.
Lab Equipment: Router 1 from the eRouters menu
Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface
1. When the lab has finished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear.
2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the > prompt indicates user mode.
Press Enter to get Started
Router>
3. Next, type the enable command to get to the privileged mode prompt.
Router>enable
Router#
4 . To return to user mode, simply type disable. From user mode, type logout or exit to exit the router.
Router#disable
Router>exit
Router con0 is now available
Press RETURN to get started
************************************************
Next:CCNA(Stand-ALONE)Lab2-Introduction to the Basic User Interface
附件:http://down.51cto.com/data/2349666
Lab Equipment: Router 1 from the eRouters menu
Background Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface
1. When the lab has finished loading, the Router 1 window will open, and the text “Press Enter to Start” will appear.
2. Click inside the Router 1 window, and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts: the host name and the mode. Router is Router 1’s host name, and the > prompt indicates user mode.
Press Enter to get Started
Router>
3. Next, type the enable command to get to the privileged mode prompt.
Router>enable
Router#
4 . To return to user mode, simply type disable. From user mode, type logout or exit to exit the router.
Router#disable
Router>exit
Router con0 is now available
Press RETURN to get started
************************************************
Next:CCNA(Stand-ALONE)Lab2-Introduction to the Basic User Interface
附件:http://down.51cto.com/data/2349666
相关文章推荐
- CCNA(Stand-ALONE)Lab 18-Saving Router configurations
- CCNA(Stand-ALONE)Lab 3-Introduction to the Basic Show Commands
- CCNA(Stand-ALONE)Lab 8-Introduction to Interface configuration
- CCNA(Stand-ALONE)Lab 22-Introduction to the Switch
- CCNA(Stand-ALONE)Lab 9-Introduction to IP
- CCNA(Stand-ALONE)Lab 23-Introduction to Basic Switch Commands
- CCNA(Stand-ALONE)Lab 6-Banner MOTD
- CCNA(Stand-ALONE)Lab 13-RIP
- CCNA(Stand-ALONE)Lab 29-Extended Access Lists
- CCNA(Stand-ALONE)Lab 14-Troubleshooting RIP
- CCNA(Stand-ALONE)Lab 30-Verify Extended Access Lists
- CCNA(Stand-ALONE)Lab 10-ARP
- CCNA(Stand-ALONE)Lab 16-PPP With CHAP Authentication
- CCNA(Stand-ALONE)Lab 19-Loading Router configurations
- CCNA(Stand-ALONE)Lab 26-Frame Relay Full Mesh Topology
- CCNA(Stand-ALONE)Lab 4-CDP
- CCNA(Stand-ALONE)Lab 20-Copying and Pasting configurations
- CCNA(Stand-ALONE)Lab 27-Standard Access Lists
- CCNA(Stand-ALONE)Lab 31-Named Access Lists
- CCNA(Stand-ALONE)Lab 24-Frame Relay