UIP Forums (Logged in as: v-yilian)
2008-01-31 18:16
609 查看
Re: Setup CD ISO for Dell 745
Posted: 02-08-2007 04:29 PM To get started you can look at this document http://sharepoint/sites/UIP/Shared%20Documents/How%20to%20-%20Slipstream%20network%20drivers%20into%20WINPE.doc but it is actually for creating a UIPSetup 2.2 CD. There is some great information but you will need to tweak the process slightly.
First, we aren't going to actually find a known working NIC and discover drivers. We know what network card is in the OptiPlex 745 so we're just going to wing it.
Copy the files from \\uipfs\setup$ to your local machine. After you have copied the files from \\uipfs\setup$ delete the contents of the ...\UIPSETUP2.2_ISO\disc\ folder. Replace it with the contents of a freshly burned UIPSETUP cd. You can get the iso from \\uipfs\iso\UIPSETUP3.0.iso of course. While I was at it I renamed UIPSETUP2.2_ISO to UIPSETUP3.0_ISO, although this isn't necessary.
Now get your Broadcom 57xx Windows XP drivers from support.dell.com. You will download an EXE from the site. Run this file which will ask you where to extract the files to. It will then proceed to try to setup the NIC, you can cancel after the files have been extracted. There should be a WinXP folder with the 3 files you need. Everything else is trash.
You're going to copy the file b57xp32.inf to two locations.
...\UIPSETUP3.0_ISO\disc\I386\INF\
...\UIPSETUP3.0_ISO\disc\X86\C_DRIVE\MININT\INF\
You're going to copy the other two files (b57win32.cat, b57xp32.sys) to two other locations.
...\UIPSETUP3.0_ISO\disc\I386\SYSTEM32\DRIVERS\
...\UIPSETUP3.0_ISO\disc\X86\C_DRIVE\MININT\SYSTEM32\DRIVERS\
Now ignore that part about modifying the Txtsetup.sif file. You may have noticed that when you copied the files in the step above, an older version already existed. Well that means the .sif file already points to files with that name. The CD already has Broadcom 57 series drivers, you just need to update them.
OPTIONAL
While you're here messing around you might as well make some customizations to save yourself some time. Open up the UIPISO.ini file located at ...\UIPSETUP3.0_ISO\disc\
I like to fill in the values for the following fields to make setup go a little faster.
LabName=MYLAB
LabUserName=labaccount
DiskPartC=DISK_C_6.TXT
DesiredOS=96
ImageName=96-SP2
NumberofProcs=2
Lastly modify the create_iso.bat file as directed in the How to document and then run it.
(Oh, and to actually answer your question... yes I have a CD you can borrow.)
UIP Forums (Logged in as: v-yilian)
Posted: 02-08-2007 04:29 PM To get started you can look at this document http://sharepoint/sites/UIP/Shared%20Documents/How%20to%20-%20Slipstream%20network%20drivers%20into%20WINPE.doc but it is actually for creating a UIPSetup 2.2 CD. There is some great information but you will need to tweak the process slightly.
First, we aren't going to actually find a known working NIC and discover drivers. We know what network card is in the OptiPlex 745 so we're just going to wing it.
Copy the files from \\uipfs\setup$ to your local machine. After you have copied the files from \\uipfs\setup$ delete the contents of the ...\UIPSETUP2.2_ISO\disc\ folder. Replace it with the contents of a freshly burned UIPSETUP cd. You can get the iso from \\uipfs\iso\UIPSETUP3.0.iso of course. While I was at it I renamed UIPSETUP2.2_ISO to UIPSETUP3.0_ISO, although this isn't necessary.
Now get your Broadcom 57xx Windows XP drivers from support.dell.com. You will download an EXE from the site. Run this file which will ask you where to extract the files to. It will then proceed to try to setup the NIC, you can cancel after the files have been extracted. There should be a WinXP folder with the 3 files you need. Everything else is trash.
You're going to copy the file b57xp32.inf to two locations.
...\UIPSETUP3.0_ISO\disc\I386\INF\
...\UIPSETUP3.0_ISO\disc\X86\C_DRIVE\MININT\INF\
You're going to copy the other two files (b57win32.cat, b57xp32.sys) to two other locations.
...\UIPSETUP3.0_ISO\disc\I386\SYSTEM32\DRIVERS\
...\UIPSETUP3.0_ISO\disc\X86\C_DRIVE\MININT\SYSTEM32\DRIVERS\
Now ignore that part about modifying the Txtsetup.sif file. You may have noticed that when you copied the files in the step above, an older version already existed. Well that means the .sif file already points to files with that name. The CD already has Broadcom 57 series drivers, you just need to update them.
OPTIONAL
While you're here messing around you might as well make some customizations to save yourself some time. Open up the UIPISO.ini file located at ...\UIPSETUP3.0_ISO\disc\
I like to fill in the values for the following fields to make setup go a little faster.
LabName=MYLAB
LabUserName=labaccount
DiskPartC=DISK_C_6.TXT
DesiredOS=96
ImageName=96-SP2
NumberofProcs=2
Lastly modify the create_iso.bat file as directed in the How to document and then run it.
(Oh, and to actually answer your question... yes I have a CD you can borrow.)
相关文章推荐
- 不知道有没有同在学习aspnetforums的
- User Interface Process (UIP) Application Block - Version 2.0
- AspNetForums2.0附件的修改
- 发布Asp.Net Forums V2 中文官方 10.1 国庆版
- 在网上看到有朋友要DVBBS -> ASPNETForums2.0的转换程序.
- View-ForumsGroupView.ascx 读解
- 以增加收藏夹功能为实例,解析asp.net forums2结构流程及组件设计
- FasSms2.0beta1整合Cnforums2.02(附源码版)
- [转]模拟Asp.Net Forums实现可以换皮肤的控件
- ASP.NET Forums与现有系统整合方案示例
- 给Asp.Net Forums的后台管理菜单做一个树形外衣
- 以增加收藏夹功能为实例,解析asp.net forums2结构流程及组件设计
- Asp.Net Forums研究文章集合(收藏)
- uip-0[1].6中文说明
- forums中的全文检索机制
- cs_Moderate_Forum_Roles///cs_Moderate_Forums///cs_Moderate_Post_Move(最后的注释)
- 把Asp.Net Forums (version 2.3.2537 ) 转换为.net 2.0 版Web Application Projects
- Asp.net Forums 论坛web.config文件详解
- asp.net forums中定时器的应用
- BW----List of logged on users in the Portal