WebSphere Application Server创建profile的响应文件

下面是创建一个dmgr profile的实例文件

################################################################################
#
# Response file for Websphere Application Server 6.0 dmgr profile creation
#
# This options file is located in the CD_ROOT/WAS/ directory and in the
# install_root/bin/ProfileCreator directory.
#
# To use the options file under CD_ROOT/WAS/ directory, follow the instructions
# in CD_ROOT/WAS/responsefile.nd.txt. The WebSphere Application Server
# Network Deployment installer locates this file during silent installation
# and automatically runs the silent profile creation at the end of installation.
#
# To use the options file under install_root/bin/ProfileCreator for silent profile
# creation, you must change various values in the file and use the following
# command line arguments:
#
# -options "responsefile.pct.NDdmgrProfile.txt" -silent
#
################################################################################

################################################################################
#
# Profile name
#
# Set the profile name for installing a deployment manager profile. The profile
# name must be unique for this WebSphere Application Server installation.
#
-W profilenamepanelInstallWizardBean.profileName="dmgr01"

################################################################################
# If you want to set this profile to be your default profile, set to "true".
# Otherwise set to "false". If this is the first profile being created, the profile
# automatically is the default.
#
-W profilenamepanelInstallWizardBean.isDefault="false"

################################################################################
#
# Profile location
#
# Specify a directory to contain the files that define the run-time environment,
# such as commands,configuration files, and log files. If the directory contains
# spaces, enclose it in double-quotes as shown in the Windows example below.
#
# Note that spaces in the install location is only supported on Windows
# operating systems.
#
# Default Install Location:
#
# -P installLocation="<WAS_HOME>/profiles/<PROFILE_NAME>"
#
-P installLocation="/opt/WebSphere/AppServer/profiles/dmgr01"

################################################################################
#
# Node name
#
# Please select the node name for the Application Server. Node name under one cell
# has to be unique.
#
# Replace YOUR_NODE_NAME with the actual node name.
#
-W nodehostandcellnamepanelInstallWizardBean.nodeName="emis02CellManager01"

################################################################################
#
# Host name
#
# Specify the host name for the Application Server. The host name is the domain
# name system (DNS) name (short or long) or the IP address of this computer.
#
# Replace YOUR_HOST_NAME with the actual host name. Comment the line to use
# the default value.
#
-W nodehostandcellnamepanelInstallWizardBean.hostName="emis02"

################################################################################
#
# Cell name
#
# Specify the cell name for the Application Server.
#
# If you plan to migrate a V5 deployment manager cell to this V6 deployment
# manager, specify the same cell name as the V5 cell.
#
# Replace YOUR_CELL_NAME with the actual cell name.
#
-W nodehostandcellnamepanelInstallWizardBean.cellName="emis02Cell01"

################################################################################
#
# Port value assignment
#
# The following entries are used to reset port numbers used in the configuration
#
# They are currently set to the defaults.
# Please check to make sure there are no Port Conflicts.
# Port nubmers for each profile can be found in: <profile>/config/cells/<cell name>/nodes/<node name>/serverindex.xml
#
-W pctdmgrprofileportspanelInstallWizardBean.WC_adminhost="9060"
-W pctdmgrprofileportspanelInstallWizardBean.WC_adminhost_secure="9043"
-W pctdmgrprofileportspanelInstallWizardBean.BOOTSTRAP_ADDRESS="9809"
-W pctdmgrprofileportspanelInstallWizardBean.SOAP_CONNECTOR_ADDRESS="8879"
-W pctdmgrprofileportspanelInstallWizardBean.SAS_SSL_SERVERAUTH_LISTENER_ADDRESS="9404"
-W pctdmgrprofileportspanelInstallWizardBean.CSIV2_SSL_SERVERAUTH_LISTENER_ADDRESS="9406"
-W pctdmgrprofileportspanelInstallWizardBean.CSIV2_SSL_MUTUALAUTH_LISTENER_ADDRESS="9405"
-W pctdmgrprofileportspanelInstallWizardBean.ORB_LISTENER_ADDRESS="9101"
-W pctdmgrprofileportspanelInstallWizardBean.CELL_DISCOVERY_ADDRESS="7277"
-W pctdmgrprofileportspanelInstallWizardBean.DCS_UNICAST_ADDRESS="9352"

################################################################################
#
# Windows service
#
# The following directives are to install services for Websphere Application Server on Windows.
# Using Services, you can start and stop services, and configure startup and recovery actions.
# Set winServiceQuery="false" will turn off the function on windows system.
# You can ignore these or comment them out for other Operating Systems.
#
-W winservicepanelInstallWizardBean.winServiceQuery="true"

################################################################################
# Specify account type of the service. Legal values are:
#
# localsystem - Indicates that you choose to use Local System account.
# specifieduser - Indicates that you choose to use specified user account.
#
-W winservicepanelInstallWizardBean.accountType="localsystem"

################################################################################
# If you chose to install a service above with the accountType="localsystem",
# the userName and password below can be ignored. If the accountType was set to:
# accountType="specifieduser", then you must specify the User Name and Password
# which are required to install the Services. The current user must be admin or must
# have admin authority to install a Service. Also the username
# which is given here must have "Log On as a Service " authority
# for the service to run properly.
#
# Replace YOUR_USER_NAME with your username.
#
-W winservicepanelInstallWizardBean.userName="YOUR_USER_NAME"

################################################################################
# Replace YOUR_PASSWORD with your valid password.
#
-W winservicepanelInstallWizardBean.password="YOUR_PASSWORD"

################################################################################
# Set the startup type of the WebSphere Application Server on Windows.
# Valid values are "automatic", "manual", and "disabled".
#
-W winservicepanelInstallWizardBean.startupType="manual"

################################################################################
# Profile type
#
# Must be set to "dmgr" for installing a deployment manager Profile.
# Do not change this!
#
-W profiletypepanelInstallWizardBean.selection="dmgr"