ubuntu下安装codeblocks
2007-10-01 00:40
495 查看
ubuntu下安装codeblocks
code::blocks在ubuntu下的安装。安装步骤:
1、安装必要组件
2、更新源
添加(以feisty为例):
3、获取密钥
4、安装最新 wxWidgets 库
5、设置 wxWidgets 默认版本
从列表中选择一项即可。
6、下载 Code::Blocks 每夜构建版本
下载地址:http://forums.codeblocks.org/index.php/board,20.0.html
7、安装 Code::Blocks
其中,CB_20070608_rev4078_Ubuntu6.10+7.04_wx2.8.4.deb是2007年6月8日最新版本,以此类推。
在这里注意的是最后一步,若在安装最后一步时出错,那么将文件解压后一个文件一文件的安装。
参考 http://wiki.codeblocks.org/
This is a quick guide to get Code::Blocks up and running on your Ubuntu based Linux distribution. It is also going to make sure you can develop wxWidgets applications on your box as well. Look at the bottom of this guide for a complete command line that will install all the packages in one operation.
First be sure you have the necessary software to compile and debug programs.
1. Install the compiler.
2. Install the debugger.
You'll need to install wxWidgets to use Codeblocks. Revisions prior to revision 4051 use wxWidgets 2.6 and revisions from 4051 and after use wxWidgets 2.8.4. If you want to install a revision prior to revision 4051, make sure you have your universe and multiverse repositories enabled and install the following packages.
3. Install wxWidgets library. (This package is all that is needed to run any application that uses wxWidgets. ie. Code::Blocks)
4. Install the wxWidgets developement packages. (This is used to develop wxWidgets applications of your own.)
5. (OPTIONAL) Install the wxWidgets documentation.
To install wxWidgets 2.8.4 you need to be using Ubuntu 6.10 (Edgy Eft) or Ubuntu 7.04 (Feisty Fawn) and you need to add the wxWidget repository to your sources.list. You can install wxWidgets 2.8.4 on Ubuntu 6.06 (Dapper Drake), but the nightly builds are not made to run on Dapper.
1. Backup your current sources.list first for precaution.
2. Open your sources.list in a text editor to edit it.
3. Add the correct repository for the Ubuntu version you are running to the end of the file. The repository listed below is referenced on the wxWidgets.org download page and appears to be for the stable version.
or
4. Save and close the file.
5. Add the key for tt-solutions.com.
Alternate wxWidgets repository. Some users of Code::Blocks have received critical errors related to libwxgtk when using the above repository packages. They were able to solve their problems by installing newer packages available from an alternate repository from wxWidgets.org. To use these packages make the following changes to the above directions:
6. Update your sources.list and run upgrade to make sure everything is up-to-date.
7. Now you're finally ready to install wxWidgets 2.8.4.
8. Set wxWidgets 2.8 as default version for your machine. Select number for the wxgtk2.8 version.
Now go get the nightly build and install it. All dependencies should now be met.
1. Get the latest nigtly build of Code::Blocks from the nightly builds forum.
2. Install Code::Blocks.
NOTE: Since revision 4281 and after, the nightly builds are made differently. Codeblocks is now packaged into separate Debian packages and the packages are archived together in a tar.gz file.
1. Download the tar.gz file to your computer and extract the files to an empty directory, such as one called temp for example.
2. Install all the packages at the same time.
The packages can be installed individually, if you prefer not to install everything. The first package to install is libcodeblocks0 followed by the codeblocks package. All the other packages are optional. If you want to install the wxsmith and/or contrib packages, you must install the libwxsmithlib0 package first.
NOTE: Here is a complete command line for the above steps. Watch for word wrap. Replace wx2.6 with wx2.8 when needed.
Without optional steps:
code::blocks在ubuntu下的安装。安装步骤:
1、安装必要组件
代码: |
sudo apt-get install build-essential |
代码: |
sudo apt-get install gdb |
代码: |
gksudo gedit /etc/apt/sources.list |
代码: |
deb http://apt.tt-solutions.com/ubuntu/ feisty main |
代码: |
wget http://www.tt-solutions.com/vz/key.asc |
代码: |
sudo apt-key add key.asc |
代码: |
sudo apt-get update |
代码: |
sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common |
代码: |
sudo update-alternatives --config wx-config |
6、下载 Code::Blocks 每夜构建版本
下载地址:http://forums.codeblocks.org/index.php/board,20.0.html
7、安装 Code::Blocks
代码: |
sudo dpkg -i CB_20070608_rev4078_Ubuntu6.10+7.04_wx2.8.4.deb |
在这里注意的是最后一步,若在安装最后一步时出错,那么将文件解压后一个文件一文件的安装。
参考 http://wiki.codeblocks.org/
Installing Code::Blocks nightly build on Ubuntu
From CodeBlocks
Jump to: navigation, searchThis is a quick guide to get Code::Blocks up and running on your Ubuntu based Linux distribution. It is also going to make sure you can develop wxWidgets applications on your box as well. Look at the bottom of this guide for a complete command line that will install all the packages in one operation.
First be sure you have the necessary software to compile and debug programs.
1. Install the compiler.
sudo apt-get install build-essential
2. Install the debugger.
sudo apt-get install gdb
You'll need to install wxWidgets to use Codeblocks. Revisions prior to revision 4051 use wxWidgets 2.6 and revisions from 4051 and after use wxWidgets 2.8.4. If you want to install a revision prior to revision 4051, make sure you have your universe and multiverse repositories enabled and install the following packages.
3. Install wxWidgets library. (This package is all that is needed to run any application that uses wxWidgets. ie. Code::Blocks)
sudo apt-get install libwxgtk2.6-0
4. Install the wxWidgets developement packages. (This is used to develop wxWidgets applications of your own.)
sudo apt-get install libwxgtk2.6-dev wx2.6-headers wx-common
5. (OPTIONAL) Install the wxWidgets documentation.
sudo apt-get install wx2.6-doc
To install wxWidgets 2.8.4 you need to be using Ubuntu 6.10 (Edgy Eft) or Ubuntu 7.04 (Feisty Fawn) and you need to add the wxWidget repository to your sources.list. You can install wxWidgets 2.8.4 on Ubuntu 6.06 (Dapper Drake), but the nightly builds are not made to run on Dapper.
1. Backup your current sources.list first for precaution.
sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak
2. Open your sources.list in a text editor to edit it.
gksudo gedit /etc/apt/sources.list
3. Add the correct repository for the Ubuntu version you are running to the end of the file. The repository listed below is referenced on the wxWidgets.org download page and appears to be for the stable version.
deb http://apt.tt-solutions.com/ubuntu/ edgy main
or
deb http://apt.tt-solutions.com/ubuntu/ feisty main
4. Save and close the file.
5. Add the key for tt-solutions.com.
wget http://www.tt-solutions.com/vz/key.asc sudo apt-key add key.asc
Alternate wxWidgets repository. Some users of Code::Blocks have received critical errors related to libwxgtk when using the above repository packages. They were able to solve their problems by installing newer packages available from an alternate repository from wxWidgets.org. To use these packages make the following changes to the above directions:
Add deb http://apt.wxwidgets.org/ edgy-wx main or deb http://apt.wxwidgets.org/ feisty-wx main to your sources.list. Download the gpg key using wget http://apt.wxwidgets.org/key.asc and install the same as above.
6. Update your sources.list and run upgrade to make sure everything is up-to-date.
sudo apt-get update sudo apt-get dist-upgrade
7. Now you're finally ready to install wxWidgets 2.8.4.
sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common
8. Set wxWidgets 2.8 as default version for your machine. Select number for the wxgtk2.8 version.
sudo update-alternatives --config wx-config
Now go get the nightly build and install it. All dependencies should now be met.
1. Get the latest nigtly build of Code::Blocks from the nightly builds forum.
2. Install Code::Blocks.
sudo dpkg -i <Name_Of_Daily_Build.deb>
NOTE: Since revision 4281 and after, the nightly builds are made differently. Codeblocks is now packaged into separate Debian packages and the packages are archived together in a tar.gz file.
1. Download the tar.gz file to your computer and extract the files to an empty directory, such as one called temp for example.
tar xvf CB_date-of-build_revision-number_Ubuntu6.10+7.04_wx2.8.4.tar.gz
2. Install all the packages at the same time.
sudo dpkg -i *.deb
The packages can be installed individually, if you prefer not to install everything. The first package to install is libcodeblocks0 followed by the codeblocks package. All the other packages are optional. If you want to install the wxsmith and/or contrib packages, you must install the libwxsmithlib0 package first.
NOTE: Here is a complete command line for the above steps. Watch for word wrap. Replace wx2.6 with wx2.8 when needed.
sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx2.6-doc wx-common
Without optional steps:
sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx-common
相关文章推荐
- Ubuntu16安装CodeBlocks
- ubuntu10.04安装codeblocks10.05
- Ubuntu13.10下用源码安装Codeblocks
- Ubuntu16.04系统安装+codeblocks安装+虚拟机配置:使用心得
- ubuntu下如何安装codeblocks集成开发环境
- Ubuntu10.04 安装 codeblocks10.05
- Ubuntu下安装CodeBlocks
- ubuntu 11.04 安装codeblocks 12.11
- Ubuntu 10.04编译安装CodeBlocks 10.5
- 在UBUNTU上安装CodeBlocks的方法(测试可行,解决7.10依赖的问题)
- Ubuntu安装CodeBlocks
- Fedora下编译安装codeblocks比Ubuntu难一百倍
- ubuntu codeblocks10.05安装全过程 (包含注意事项:安装后不能启动)
- ubuntu 安装codeblocks教程 一遍安装成功
- 转:ubuntu 下code blocks 安装全过程 && codeblocks 快捷键 && 解决调试终端不能粘贴问题
- 【转贴】Ubuntu10.04 安装 Codeblocks10.05
- ubuntu 14.04安装codeblocks
- ubuntu 10.04 codeblocks10.05安装问题 安装后不能启动
- 安装Ubuntu,安装配置软件视频教程 (把学C++和CodeBlocks,玩Ubuntu的积累来个总结)
- ubuntu下安装codeblocks