[H/W] MP : Admin 口令的变更的方法
2007-08-07 15:20
246 查看
变更用户 Admin 的口令
[構成]
rx1600 rx1620 rx2600 rx2620 rx4640 rx5670
rp3410 rp3440 rp4410 rp4440
[解決方法]
能使用MP指令的 UC 变更。对以下表现那个实际的次序。
MP:CM> uc
This command allows you to modify the user configuration.
User Configuration Menu:
L - List current users
N - Add a New user
C - Change a current user
D - Delete a current user
Enter menu item or [Q] to Quit: l
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
试着进行了现在被设定的用户的名单
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current User Configuration:
Login ID User Name Access Rights Enabled
--------------------------------------------------------------------------
1 - Admin Default Admin C, P, M, U Yes
2 - Oper Default Operator C Yes
3 - test test C, P, M, U Yes
Enter number for more detail, or [Q] to Quit: q
User Configuration Menu:
L - List current users
N - Add a New user
C - Change a current user
D - Delete a current user
Enter menu item or [Q] to Quit: c
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
为了变更口令 "c"实行(Change a current user)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current User Configuration:
Login ID User Name Access Rights Enabled
--------------------------------------------------------------------------
1 - Admin Default Admin C, P, M, U Yes
2 - Oper Default Operator C Yes
3 - test test C, P, M, U Yes
Select User to modify by number, or [Q] to Quit: 1
Current User Parameters:
L - User Login ID : Admin
P - User Password : ************ U - User Name : De
fault Admin
W - User Workgroup :
R - User Access Rights : Console access, Power control,
MP configuration, User administration
M - User Operating Mode : Multiple
E - User Enabled/Disabled : Enabled
D - Modem Dial-back : Disabled
T - Modem Dial-back Phone :
Enter parameter(s) to change, A to modify All, or [Q] to Quit: p
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
实行因为想只变更口令 "p"
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
For each parameter, enter:
New value, or
<CR> to retain the current value, or
Q to Quit
User Password:
6-24 characters
<CR> to retain current password
Enter New Password: **********
Enter New Password for confirmation: *********
-> Password will be updated
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
口令需要6个字以上
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
New User Parameters (* modified values):
L - User Login ID : Admin
* P - User Password : ************
U - User Name : Default Admin
W - User Workgroup :
R - User Access Rights : Console access, Power control,
MP configuration, User administration
M - User Operating Mode : Multiple
E - User Enabled/Disabled : Enabled
D - Modem Dial-back : Disabled
T - Modem Dial-back Phone :
Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y
User may be disconnected in this process
<Your 'TELNET' connection has terminated>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
口令的变更结束的话MP自动地被复位
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*************************************************************************
This is a private system.
Do not attempt to login unless you are an authorized user.
Any authorized or unauthorized access or use may be monitored and can
result in criminal or civil prosecution under applicable law.
*************************************************************************
MP login: Admin
MP password: **********
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
新的口令进入变成了可能
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
注記
====
如果,想到口令的设定后到默认值返还全部的用户设定的情况 uc -all default 的指令能实施。
这个情况新规章追加了的用户的设定请注意全部消失的事。
MP:CM> uc -all default
All user entries will be deleted.
Confirm? (Y/
): y
User may be disconnected in this process
-> User Configuration has been updated.
-> Command successful.
<Your 'TELNET' connection has terminated>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
指令实行后MP自动地被复位
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[構成]
rx1600 rx1620 rx2600 rx2620 rx4640 rx5670
rp3410 rp3440 rp4410 rp4440
[解決方法]
能使用MP指令的 UC 变更。对以下表现那个实际的次序。
MP:CM> uc
This command allows you to modify the user configuration.
User Configuration Menu:
L - List current users
N - Add a New user
C - Change a current user
D - Delete a current user
Enter menu item or [Q] to Quit: l
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
试着进行了现在被设定的用户的名单
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current User Configuration:
Login ID User Name Access Rights Enabled
--------------------------------------------------------------------------
1 - Admin Default Admin C, P, M, U Yes
2 - Oper Default Operator C Yes
3 - test test C, P, M, U Yes
Enter number for more detail, or [Q] to Quit: q
User Configuration Menu:
L - List current users
N - Add a New user
C - Change a current user
D - Delete a current user
Enter menu item or [Q] to Quit: c
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
为了变更口令 "c"实行(Change a current user)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current User Configuration:
Login ID User Name Access Rights Enabled
--------------------------------------------------------------------------
1 - Admin Default Admin C, P, M, U Yes
2 - Oper Default Operator C Yes
3 - test test C, P, M, U Yes
Select User to modify by number, or [Q] to Quit: 1
Current User Parameters:
L - User Login ID : Admin
P - User Password : ************ U - User Name : De
fault Admin
W - User Workgroup :
R - User Access Rights : Console access, Power control,
MP configuration, User administration
M - User Operating Mode : Multiple
E - User Enabled/Disabled : Enabled
D - Modem Dial-back : Disabled
T - Modem Dial-back Phone :
Enter parameter(s) to change, A to modify All, or [Q] to Quit: p
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
实行因为想只变更口令 "p"
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
For each parameter, enter:
New value, or
<CR> to retain the current value, or
Q to Quit
User Password:
6-24 characters
<CR> to retain current password
Enter New Password: **********
Enter New Password for confirmation: *********
-> Password will be updated
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
口令需要6个字以上
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
New User Parameters (* modified values):
L - User Login ID : Admin
* P - User Password : ************
U - User Name : Default Admin
W - User Workgroup :
R - User Access Rights : Console access, Power control,
MP configuration, User administration
M - User Operating Mode : Multiple
E - User Enabled/Disabled : Enabled
D - Modem Dial-back : Disabled
T - Modem Dial-back Phone :
Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y
User may be disconnected in this process
<Your 'TELNET' connection has terminated>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
口令的变更结束的话MP自动地被复位
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*************************************************************************
This is a private system.
Do not attempt to login unless you are an authorized user.
Any authorized or unauthorized access or use may be monitored and can
result in criminal or civil prosecution under applicable law.
*************************************************************************
MP login: Admin
MP password: **********
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
新的口令进入变成了可能
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
注記
====
如果,想到口令的设定后到默认值返还全部的用户设定的情况 uc -all default 的指令能实施。
这个情况新规章追加了的用户的设定请注意全部消失的事。
MP:CM> uc -all default
All user entries will be deleted.
Confirm? (Y/
): y
User may be disconnected in this process
-> User Configuration has been updated.
-> Command successful.
<Your 'TELNET' connection has terminated>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
指令实行后MP自动地被复位
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
相关文章推荐
- oracle密码过期ORA-28002: 7天之后口令将过期的解决方法
- [H/W] EFI Autoboot 设定变更的方法
- 破解CentOS7 的root口令的两种方法
- 设计一个User类,并定义类的三个构造方法,类中有三个变量有用户名、口令、记录用户个数
- INS-30011 输入的ADMIN口令不符合Oracle建议的标准
- MySql Host is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' 解决方法
- git服务器被删除或变更的处理方法
- 测试过程针对新增和变更需求的处理方法!
- Java Swing实现JTable检测单元格数据变更事件的方法示例
- navicat连接oracle数据库ORA-28547:connection to server failed, probable Oracle Net admin error错误,解决方法
- 公司里用FOXMAIL7帐号访问口令忘记处理方法
- “迭代期内无变更”与研发心理学(承诺管理,MosCoW方法)
- SCAMPI A类评估方法v1.2变更简介
- wordpress站点地址变更无法访问时修改方法
- 破解WINDOWS XP登陆口令的方法
- 黑客破解口令常用的三种方法
- Eclipse SVN地址变更后,右键卡死解决方法(二)常规方法
- 使用Python监视指定目录下文件变更的方法
- dubbo-admin-2.5.3 运行报错: Bean property 'URIType' is not writable or has an invalid 解决方法
- 从AP中获取电池和电源信息变更通知的方法