RHEL4下Postfix+dovecot实现简单邮件服务
2007-07-17 11:04
447 查看
Postfix+dovecot实现简单邮件服务
1. 删除sendmail,#rpm –e sendmail
2. 检查网络环境。
网卡配置:/etc/sysconfig/network-scripts/ifcfg-eth0,设置IP,掩码,网关等。
网络配置:/etc/sysconfig/network,内容为:HOSTNAME=localhost
NETWORKING=yes
主机配置:/etc/hosts,加上:192.168.1.236 test.com localhost
3.重新启动网络服务:service network restart
4.安装postfix(在光盘中找到),#rpm –ivh *.rpm
5.配置/etc/postfix/main.cf(注意先备份)。
Inet-interfaces=all
6.重启postfix服务,#service podtfix restart
7.安装dovecot(在光盘中找到)
8.配置/etc/dovecot.conf
Protocols=imap pop3
9.重启dovecot服务,#service dovecot restart
10.测试(同sendmail)
1. 删除sendmail,#rpm –e sendmail
2. 检查网络环境。
网卡配置:/etc/sysconfig/network-scripts/ifcfg-eth0,设置IP,掩码,网关等。
网络配置:/etc/sysconfig/network,内容为:HOSTNAME=localhost
NETWORKING=yes
主机配置:/etc/hosts,加上:192.168.1.236 test.com localhost
3.重新启动网络服务:service network restart
4.安装postfix(在光盘中找到),#rpm –ivh *.rpm
5.配置/etc/postfix/main.cf(注意先备份)。
Inet-interfaces=all
6.重启postfix服务,#service podtfix restart
7.安装dovecot(在光盘中找到)
8.配置/etc/dovecot.conf
Protocols=imap pop3
9.重启dovecot服务,#service dovecot restart
10.测试(同sendmail)
相关文章推荐
- 邮件服务系列之三实现postfix+dovecot+sasl
- RHEL4下Sendmail+dovecot实现简单邮件收发(不做认证)
- RHEL6 postfix+dovecot 邮件服务配置
- 使用Postfix+dovecot+MySQL+PostfixAdmin实现基本的邮件服务
- Postfix+Dovecot 搭建简单认证的邮件服务
- RHEL6 postfix+dovecot+mysql 邮件服务配置
- 简单邮件服务(Postfix+dovecot)
- [RHEL] RHEL7.0 下 Postfix + Dovecot 实现邮件发送
- 构建postfix邮件服务器(二)postfix和dovecot的安装,实现简单的收发邮件
- 搭建 Postfix、Dovecot 邮件服务
- Postfix+Dovecot+MySQL+Cyrus-sasl+Extmail实现基于虚拟用户的邮件系统架构
- CentOS 6.x 下Postfix和dovecot邮件服务安装和基本配置
- 简单配置postfix邮件服务
- RHEl 5服务篇—部署Postfix邮件服务(二)配置邮件服务器的收、发信服务
- CentOS 搭建Postfix+Dovecot简单邮件系统
- 邮件服务/Sendmail/Dovecot/Postfix的配置与应用
- postfix和dovecot简单的邮件服务器
- PHP实现Amazon简单邮件服务SMTP
- Openldap+Postfix+courier-imap+FreeBSD实现邮件服务(v1.1)
- Mail,邮件服务(二):收发邮件以及如何基于认证实现邮件简单安全