『转载』别脱我裤子我已经结婚了
2007-03-05 13:19
302 查看
Oracle Linux 5 Installation
Boot from the CD or DVD. At the boot screen, press the "Enter" key.
Press the "tab" key to move focus to the "Skip" key, then press the "Enter" key to continue.
On the "Welcome" screen, click the "Next" button.
Select the appropriate language, then click the "Next" button.
Select the relevant keyboard setting, then click the "Next" button.
Click the "Yes" button on the disk partitioning warning dialog.
Check the "Review and modify partitioning layout" option, then allow the installer to automatically partition the disk by clicking on the "Next" button.
Click the "Yes" button on the subsequent warning dialog.
The installer will list the default partitioning scheme for your size disk.
The following screen shots show the actions I take for small test installations
Edit the "/boot" partition, setting it to "150M" and "Fixed size", then click the "OK" button.
The "/root" and "/swap" partitions are part of a volume group.
Edit the "/root" partition, setting it to "8000 MB", then click the "OK" button.
Edit the "swap" partition, setting it to "2048M", then click the "OK" button.
If you need additional swap space, simply make this partition bigger.
The partitions screen should now looks something like the following picture, then click the "Next" button.
Accept the boot loader settings by clicking the "Next" button.
Configure the network interface with the apropriate settings. This can be done automatically using DHCP, or manually.
If you are not using DHCP, enter the appropriate IP addess and subnet mask, then click the "OK" button.
If you are not using DHCP, enter the host name, gateway and DNS information, then click the "Next" button.
Select the relevant region by clicking on the map.
Select the relevant city by clicking on the map. Click on the "Next" button to proceed.
Enter a root password for the server, then click the "Next" button to proceed.
Select the "Customize now" option and the appropriate installation type and click the "Next" button.
The "Package Group Selection" screen allows you to select the required package groups, and individual packages within the details section. When you've made your selection, click the "Next" button.
On the "About to Install" screen, click the "Next" button.
Click the "Continue" button on the "Required Install Media" screen.
During the installation phase, enter the appropriate CDs as requested.
Click the "Reboot" button to complete the installation.
On the "Welcome" screen, click the "Forward" button.
Accept the license agreement and click the "Forward" button.
On the Firewall screen, choose the "Disabled" option and click the "Forward" button.
Click the "Yes" button on the subsequent warning screen.
On the SELinux screen, choose the "Disabled" option and click the "Forward" button.
Click the "Yes" button on the subsequent warning screen.
Accept the default setting on the Kdump screen by clicking the "Forward" button.
Adjust the Date and Time settings if necessary, and click the "Forward" Button.
If you have an Unbreakable Linux Support account, you can enter it here and register your system. Alternatively, you can pick the "No, I prefer to register at a later time" option and click the "Forward" button to avoid this step.
Create an additional system user if required, and click the "Next" button.
If you chose not to define an additional system user, click the "Continue" button on the resulting warning dialog.
On the sound card screen, click the "Forward" button.
On the "Additional CDs" screen, click the "Finish" button.
Click the "OK" button on the reboot request dialog.
Once the system has rebooted, you are presented with the login screen.
Once logged in, you are ready to use the desktop.
本文出自 “IT小民工” 博客,请务必保留此出处http://novali.blog.51cto.com/2798986/1209163
Boot from the CD or DVD. At the boot screen, press the "Enter" key.
Press the "tab" key to move focus to the "Skip" key, then press the "Enter" key to continue.
On the "Welcome" screen, click the "Next" button.
Select the appropriate language, then click the "Next" button.
Select the relevant keyboard setting, then click the "Next" button.
Click the "Yes" button on the disk partitioning warning dialog.
Check the "Review and modify partitioning layout" option, then allow the installer to automatically partition the disk by clicking on the "Next" button.
Click the "Yes" button on the subsequent warning dialog.
The installer will list the default partitioning scheme for your size disk.
The following screen shots show the actions I take for small test installations
Edit the "/boot" partition, setting it to "150M" and "Fixed size", then click the "OK" button.
The "/root" and "/swap" partitions are part of a volume group.
Edit the "/root" partition, setting it to "8000 MB", then click the "OK" button.
Edit the "swap" partition, setting it to "2048M", then click the "OK" button.
If you need additional swap space, simply make this partition bigger.
The partitions screen should now looks something like the following picture, then click the "Next" button.
Accept the boot loader settings by clicking the "Next" button.
Configure the network interface with the apropriate settings. This can be done automatically using DHCP, or manually.
If you are not using DHCP, enter the appropriate IP addess and subnet mask, then click the "OK" button.
If you are not using DHCP, enter the host name, gateway and DNS information, then click the "Next" button.
Select the relevant region by clicking on the map.
Select the relevant city by clicking on the map. Click on the "Next" button to proceed.
Enter a root password for the server, then click the "Next" button to proceed.
Select the "Customize now" option and the appropriate installation type and click the "Next" button.
The "Package Group Selection" screen allows you to select the required package groups, and individual packages within the details section. When you've made your selection, click the "Next" button.
On the "About to Install" screen, click the "Next" button.
Click the "Continue" button on the "Required Install Media" screen.
During the installation phase, enter the appropriate CDs as requested.
Click the "Reboot" button to complete the installation.
On the "Welcome" screen, click the "Forward" button.
Accept the license agreement and click the "Forward" button.
On the Firewall screen, choose the "Disabled" option and click the "Forward" button.
Click the "Yes" button on the subsequent warning screen.
On the SELinux screen, choose the "Disabled" option and click the "Forward" button.
Click the "Yes" button on the subsequent warning screen.
Accept the default setting on the Kdump screen by clicking the "Forward" button.
Adjust the Date and Time settings if necessary, and click the "Forward" Button.
If you have an Unbreakable Linux Support account, you can enter it here and register your system. Alternatively, you can pick the "No, I prefer to register at a later time" option and click the "Forward" button to avoid this step.
Create an additional system user if required, and click the "Next" button.
If you chose not to define an additional system user, click the "Continue" button on the resulting warning dialog.
On the sound card screen, click the "Forward" button.
On the "Additional CDs" screen, click the "Finish" button.
Click the "OK" button on the reboot request dialog.
Once the system has rebooted, you are presented with the login screen.
Once logged in, you are ready to use the desktop.
本文出自 “IT小民工” 博客,请务必保留此出处http://novali.blog.51cto.com/2798986/1209163
相关文章推荐
- 数据结构-树-已经知道先根(后根)和中根 构建树(转载)
- 青涩已成屌丝 小霸王已经不是那个小霸王(转载)
- [荐] [顶] ★★从男女情话看结婚前后的差别!!!~!!(欢迎转载)
- 【家暴怎么办?】我跟先生已经结婚…
- [经济杂谈]只要你是小股东, 就已经被套住了(转载)
- 如何向已经安装好的apache添加一个模块 (纯转载)
- 写作文的时代已经很远了,刚看到一篇作文,所以转载了
- [转载]给想立志入行网络或已经初入行的朋友的建议
- hibernate join fetch lazy 你懂了么,反正我已经凌乱了,今天整理一下,转载一下人家的文章吧
- 转载_debian linux 中如何查看软件包是否已经安装和如何安装、卸载软件
- [转载自MOS文章]Oracle Database 12.2 for Linux x86-64,Solaris SPARC ,Solaris x86-64 的发布日期已经确定
- 已经加入版本控制的目录文件怎么忽略呢【转载】
- 已经清空回收站的情况下怎样恢复刚刚删除的文件(转载)
- [转载]WIN7已经记住访问另一台电脑的账号和密码 凭证
- 好文章 转载:我希望成为一个优秀的IT人,我已经努力了七年
- 已经过事务处理的 MSMQ 绑定(转载)
- 在Inno Setup制作的安装包中利用Pascal脚本检查安装,卸载前检查程序是否已经启动 [转载]
- 前几天碰到个同学,已经结婚了,突然发现自己也很老了
- 你可能已经知道或者不知道的ASP.NET 2.0技巧(转载)
- [转载]给想立志入行网络或已经初入行的朋友的建议