[align=left]经典配置包括Catalyst6509 4006交换机配置方案 拓扑结构如下图所示:[/align]
500)this.width=500;" border=0> 这个配置的例子里面涉及到了:HSRP,VLAN,VTP,STP,TRUNK,PPP等等,一些工程中很常见的配置! 一、 Catalyst 6509交换机配置方案 1.1、配置6509二层交换 Console> (enable) set system name bg-sw-01 /设备名称 Bg-sw-01> (enable) set password Enter old password: Enter new password: test /设备口令 Retype new password: test Bg-sw-01> (enable) set enablepass Enter old password: Enter new password: test /设备口令 Retype new password: test Bg-sw-01> (enable) set banner motd % Welcome to the c6509 in the office % /提示文本 Bg-sw-01> (enable) set interface sc0 10.234.180.21 255.255.255.0 /设置管理接口 #sh int Bg-sw-01> (enable) set ip route default 10.234.180.234 /设置默认网关 #sh ip route Bg-sw-01> (enable) set vtp mode server /设置VTP模式 #sh vtp domain Bg-sw-01> (enable) set vtp domain Core_Net /设置VTP域名 Bg-sw-01> (enable) set vlan 31 name ZhongSanLu /创建VLAN #sh vlan Bg-sw-01> (enable) set vlan 32 name YiYang Bg-sw-01> (enable) set vlan 33 name JianXiu Bg-sw-01> (enable) set vlan 34 name RaoDian Bg-sw-01> (enable) set vlan 35 name JinSanLou Bg-sw-01> (enable) set vlan 36 name WuZi Bg-sw-01> (enable) set port channel 1/1-2 on /设置Channel #sh port channel Bg-sw-01> (enable) set trunk 1/1 on dot1q 1-1005 Bg-sw-01> (enable) set trunk 2/2 on dot1q 1-1005 /设置trunk口 #sh trunk # Bg-sw-01> (enable) set trunk 2/3 on dot1q 1-1005 Bg-sw-01> (enable) set trunk 2/4 on dot1q 1-1005 Bg-sw-01> (enable) set trunk 2/5 on dot1q 1-1005 Bg-sw-01> (enable) set trunk 2/6 on dot1q 1-1005 Bg-sw-01> (enable) set trunk 2/7 on dot1q 1-1005 Bg-sw-01> (enable) set spantree root 1-40 dia 4 /设为spantree的根 #sh spantree Bg-sw-01> (enable) set spantree portfast 1/1-2 enable /设spantree端口快速启用 Bg-sw-01> (enable) set spantree portfast 2/1-8 enable Bg-sw-01> (enable) set spantree uplinkfast enable /设spantree端口快速切换 Bg-sw-01> (enable) set spantree backbonefast enable /设spantree端口快速定位根 1.2、配置路由 Console> (enable) session 15 /进入路由子卡 Router(config)# hostname c6509-msfc /设备名 c6509-msfc (config)# enable password test /设口令 c6509-msfc (config)# enable secret test C6509-msfc(config)# banner motd % Welcome to the c6509-msfc in the Office % /设提示文本 c6509-msfc (config)# line vty 0 4 / 进入VTY模式 c6509-msfc (config-line)#login / 登入提示 c6509-msfc (config-line)#password test / 设用户级口令 c6509-msfc (config-line)# end C6509-msfc#configure terminal / 进入全局模式 Enter configuration commands, one per line. End with CNTL/Z. C6509-msfc(config)# interface vlan 1 /进入虚子接口 C6509-msfc(config-if)# ip address 10.234.180.232 255.255.255.0 /加ip地址 C6509-msfc(config-if)# no shutdown /开启端口 C6509-msfc(config-if)# standby 1 ip 10.234.180.234 /建HSRP组并设虚IP地址 C6509-msfc(config-if)# standby 1 priority 110 /设优先级 C6509-msfc(config-if)# standby 1 preempt /设切换许可 C6509-msfc(config-if)# interface vlan 31 C6509-msfc(config-if)# ip address 10.234.181.60 255.255.255.192 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 31 ip 10.234.181.62 C6509-msfc(config-if)# standby 31 priority 110 C6509-msfc(config-if)# standby 31 preempt C6509-msfc(config-if)# interfacevlan 32 C6509-msfc(config-if)# ip address 10.234.181.124 255.255.255.192 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 32 ip 10.234.181.126 C6509-msfc(config-if)# standby 32 priority 110 C6509-msfc(config-if)# standby 32 preempt
C6509-msfc(config-if)# interface vlan 33 C6509-msfc(config-if)# ip address 10.234.181.188 255.255.255.192 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 33 ip 10.234.181.190 C6509-msfc(config-if)# standby 33 priority 110 C6509-msfc(config-if)# standby 33 preempt C6509-msfc(config-if)# interface vlan 34 C6509-msfc(config-if)# ip address 10.234.181.220 255.255.255.224 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 34 ip 10.234.181.222 C6509-msfc(config-if)# standby 34 priority 110 C6509-msfc(config-if)# standby 34 preempt
C6509-msfc(config-if)# interface vlan 35 C6509-msfc(config-if)# ip address 10.234.181.254 252.255.255.224 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 35 ip 10.234.181.254 C6509-msfc(config-if)# standby 35 priority 110 C6509-msfc(config-if)# standby 35 preempt
C6509-msfc(config-if)# interface vlan 36 C6509-msfc(config-if)# ip address 10.234.182.28 255.255.255.224 C6509-msfc(config-if)# no shutdown C6509-msfc(config-if)# standby 36 ip 10.234.182.30 C6509-msfc(config-if)# standby 36 priority 110 C6509-msfc(config-if)# standby 36 preempt C6509-msfc(config-if)# exit C6509-msfc #copy running config ------------------------------------------------- 二、Catalyst 4006交换机配置方案 2.1、配置4006二层交换(三层交换模块安置在第二个槽) Console> (enable) set system name bg-sw-02 /设备名称 Bg-sw-02> (enable) set password Enter old password: Enter new password: test /设备口令 Retype new password: test Bg-sw-02> (enable) set enablepass Enter old password: Enter new password: test /设备口令 Retype new password: test Bg-sw-02> (enable) set banner motd % Welcome to the c4006 in the office % /提示文本 Bg-sw-02> (enable) set interface sc0 10.234.180.22 255.255.255.0 /设置管理接口 #sh int Bg-sw-02> (enable) set ip route default 10.234.180.234 /设置默认网关 #sh ip route Bg-sw-02> (enable) set vtp mode server /设置VTP模式 #sh vtp domain Bg-sw-02> (enable) set vtp domain Core_Net /设置VTP域名 Bg-sw-02> (enable) set vlan 31 name ZhongSanLu /创建VLAN #sh vlan Bg-sw-02> (enable) set vlan 32 name YiYang Bg-sw-02> (enable) set vlan 33 name JianXiu Bg-sw-02> (enable) set vlan 34 name RaoDian Bg-sw-02> (enable) set vlan 35 name JinSanLou Bg-sw-02> (enable) set vlan 36 name WuZi Bg-sw-02> (enable) set port channel 1/1-2 on /设置Channel #sh port channel Bg-sw-02> (enable) set trunk 1/1 on dot1q 1-1005 Bg-sw-02> (enable) set port channel 2/1-2 on /设置Channel #sh port channel Bg-sw-02> (enable) set trunk 2/1 on dot1q 1-1005 Bg-sw-02> (enable) set trunk 4/1 on dot1q 1-1005 /设置trunk口 #sh trunk # Bg-sw-02> (enable) set trunk 4/3 on dot1q 1-1005 Bg-sw-02> (enable) set trunk 4/4 on dot1q 1-1005 Bg-sw-02> (enable) set spantree root secondary 1-40 dia 4 Bg-sw-02> (enable) set spantree portfast 1/1-2 enable /设spantree端口快速启用 Bg-sw-02> (enable) set spantree portfast 2/1-34 enable Bg-sw-02> (enable) set spantree portfast 3/1-32 enable Bg-sw-02> (enable) set spantree portfast 4/1-6 enable Bg-sw-02> (enable) set spantree uplinkfast enable /设spantree端口快速切换 Bg-sw-02> (enable) set spantree backbonefast enable /设spantree端口快速定位根 2.1、配置三层交换模块(三层交换模块安置在第二) Console> (enable) session 2 /进入路由子卡 Router(config)# hostname c4006-L3 /设备名 c4006-L3 (config)# enable password test /设口令 c4006-L3 (config)# enable secret test c4006-L3(config)# banner motd % Welcome to the c4006-l3 in the Office % /设提示文本 c4006-L3 (config)# line vty 0 4 / 进入VTY模式 c4006-L3 (config-line)#login / 登入提示 c4006-L3 (config-line)#password test / 设用户级口令 c4006-L3 (config-line)# end C4006-L3#configure terminal Enter configuration commands, one per line. End with CNTL/Z. C4006-L3(config)# interface port-channel 1 /建内部虚端口 C4006-L3(config)# interface g3 /进入接口模式 C4006-L3(config-if)# channel-group 1 / 加入到channel组中 C4006-L3(config-if)# exit C4006-L3(config)# interface g4 /进入接口模式 C4006-L3(config-if)# channel-group 1 / 加入到channel组中 C4006-L3(config-if)# exit
C4006-L3(config)# interface port-channel 1.1 /进入子接口模式 C4006-L3(config-if)# encapsulation dot1q 1 native / 封装trunk C4006-L3(config-if)# ip address 10.234.180.233 255.255.255.0 /加ip地址 C4006-L3(config-if)# no shutdown /开启端口 C4006-L3(config-if)# standby 1 ip 10.234.180.234 /建HSRP组并设虚IP地址 C4006-L3(config-if)# standby 1 priority 100 /设优先级 C4006-L3(config-if)# standby 1 preempt /设切换许可 C4006-L3(config-if)# interface port-channel 1.31 C4006-L3(config-if)# encapsulation dot1q 31 C4006-L3(config-if)# ip address 10.234.181.61 255.255.255.192 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 31 ip 10.234.181.62 C4006-L3(config-if)# standby 31 priority 100 C4006-L3(config-if)# standby 31 preempt C4006-L3(config-if)# interface port-channel 1.32 C4006-L3(config-if)# encapsulation dot1q 32 C4006-L3(config-if)# ip address 10.234.181.125 255.255.255.192 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 32 ip 10.234.181.126 C4006-L3(config-if)# standby 32 priority 100 C4006-L3(config-if)# standby 32 preempt C4006-L3(config-if)# interface port-channel 1.33 C4006-L3(config-if)# encapsulation dot1q 33 C4006-L3(config-if)# ip address 10.234.181.189 255.255.255.192 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 33 ip 10.234.181.190 C4006-L3(config-if)# standby 33 priority 100 C4006-L3(config-if)# standby 33 preempt C4006-L3(config-if)# interface port-channel 1.34 C4006-L3(config-if)# encapsulation dot1q 34 C4006-L3(config-if)# ip address 10.234.181.221 255.255.255.224 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 34 ip 10.234.181.222 C4006-L3(config-if)# standby 34 priority 100 C4006-L3(config-if)# standby 34 preempt C4006-L3(config-if)# interface port-channel 1.35 C4006-L3(config-if)# encapsulation dot1q 35 C4006-L3(config-if)# ip address 10.234.181.253 255.255.255.224 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 35 ip 10.234.181.254 C4006-L3(config-if)# standby 35 priority 100 C4006-L3(config-if)# standby 35 preempt C4006-L3(config-if)# interface port-channel 1.36 C4006-L3(config-if)# encapsulation dot1q 36 C4006-L3(config-if)# ip address 10.234.182.29 255.255.255.224 C4006-L3(config-if)# no shutdown C4006-L3(config-if)# standby 36 ip 10.234.182.30 C4006-L3(config-if)# standby 36 priority 100 C4006-L3(config-if)# standby 36 preempt C4006-L3(config-if)# exit C4006-L3#copy running config -------------------------------------------------------------- 三、Catalyst 3500XL交换机配置方案 3.1、办公楼Catalyst 3500XL交换机配置方案 第一台Catalyst 3548 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname bg-sw-03 /设备名 bg-sw-03(config)#enable password test /设口令 bg-sw-03(config)#enable secret test bg-sw-03(config)#banner motd % Welcome to the C3548 in the Office % /提示文本 bg-sw-03(config)#line vty 0 4 / 进入VTY模式 bg-sw-03(config.line)#login / 登入提示 bg-sw-03(config.line)#password test / 设用户级口令 bg-sw-03(config.line)#exit bg-sw-03 (config)#int vlan 1 / 进入内部管理接口 bg-sw-03 (config-if)#ip address 10.234.180.23 255.255.255.0 /加入IP地址 bg-sw-03(config-if)#exit bg-sw-03(config)#ip default.gateway 10.234.180.234 /设网关 bg-sw-03(config)#end bg-sw-03#vlan database / 进入vtp数据库 bg-sw-03(vlan)#vtp domain Corp_Net /设vtp域 bg-sw-03(vlan)#vtp client /设定vtp模式 bg-sw-03(vlan)#exit bg-sw-03(config)#spantree uplinkfast /设定端口快速上连 bg-sw-03(config)#int g0/1 /进入接口模式 bg-sw-03(config-if)#switchport mode trunk /设为trunk模式 bg-sw-03(config-if)#switchport trunk encapsulation dot1q /设定封装模式 bg-sw-03(config-if)#switchport trunk allowed vlan all /设定trunk许可vlan bg-sw-03(config-if)#spanning-tree portfast /设定端口快速启用 bg-sw-03(config-if)#int g0/2 /进入接口模式 bg-sw-03(config-if)#switchport mode trunk /设为trunk模式 bg-sw-03(config-if)#switchport trunk encapsulation dot1q /设定封装模式 bg-sw-03(config-if)#switchport trunk allowed vlan all /设定trunk许可vlan bg-sw-03(config-if)#spanning-tree portfast /设定端口快速启用 bg-sw-03(config-if)#exit bg-sw-03#write memory 第二台Catalyst 3548 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname bg-sw-04 /设备名 bg-sw-04(config)#enable password test /设口令 bg-sw-04(config)#enable secret test bg-sw-04(config)#banner motd % Welcome to the C3548 in the Office % /提示文本 bg-sw-04(config)#line vty 0 4 / 进入VTY模式 bg-sw-04(config.line)#login / 登入提示 bg-sw-04(config.line)#password test / 设用户级口令 bg-sw-04(config.line)#exit / 进入内部管理接口 bg-sw-04(config)#int vlan 1 bg-sw-04(config-if)#ip address 10.234.180.24 255.255.255.0 bg-sw-04(config-if)#exit bg-sw-04(config)#ip default.gateway 10.234.180.234 bg-sw-04(config)#end bg-sw-04#vlan database bg-sw-04(vlan)#vtp domain Corp_Net bg-sw-04(vlan)#vtp client bg-sw-04(vlan)#exit bg-sw-04(config)#spantree uplinkfast bg-sw-04(config)#int g0/1 bg-sw-04(config-if)#switchport mode trunk bg-sw-04(config-if)#switchport trunk encapsulation dot1q bg-sw-04(config-if)#switchport trunk allowed vlan all bd-sw-03 (config-if)# spanning-tree portfast bg-sw-04(config-if)#exit bg-sw-04(config)#int g0/2 bg-sw-04(config-if)#switchport mode trunk bg-sw-04(config-if)#switchport trunk encapsulation dot1q bg-sw-04(config-if)#switchport trunk allowed vlan all bg-sw-04(config-if)#spanning-tree portfast bg-sw-04(config-if)#exit bg-sw-04#write memory 3.2 办公楼Catalyst 3548XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname zsr-sw-01 zsr-sw-01(config)#enable password test zsr-sw-01(config)#enable secret test zsr-sw-01(config)#banner motd % Welcome to the C3548 in the Zhong San Lu ban Gong Lou % zsr-sw-01(config)#line vty 0 4 zsr-sw-01(config.line)#login zsr-sw-01(config.line)#password test zsr-sw-01(config.line)#exit zsr-sw-01(config)#int vlan 1 zsr-sw-01(config-if)#ip address 10.234.180.25 255.255.255.0 zsr-sw-01(config-if)#exit zsr-sw-01(config)#ip default.gateway 10.234.180.234 zsr-sw-01(config)#end zsr-sw-01#vlan database zsr-sw-01(vlan)#vtp domain Corp_Net zsr-sw-01(vlan)#vtp client zsr-sw-01(vlan)#exit zsr-sw-1#configure terminal zsr-sw-1(config)#int f0/1 zsr-sw-1(config-if)#switchport mode access zsr-sw-1(config-if)#switchport access vlan 31 zsr-sw-1(config-if)#exit zsr-sw-1(config)#int f0/2 。。。。。。 zsr-sw-1(config)#int f0/48 zsr-sw-1(config-if)#switchport mode access zsr-sw-1(config-if)#switchport access vlan 31 zsr-sw-1(config-if)#exit zsr-sw-01(config)#int g0/1 zsr-sw-01(config-if)#switchport mode trunk zsr-sw-01(config-if)#switchport trunk encapsulation dot1q zsr-sw-01(config-if)#switchport trunk allowed vlan all zsr-sw-01 (config-if)#spantree cost 10 zsr-sw-01(config-if)#exit zsr-sw-01(config)#int g0/2 zsr-sw-01(config-if)#switchport mode trunk zsr-sw-01(config-if)#switchport trunk encapsulation dot1q zsr-sw-01(config-if)#switchport trunk allowed vlan all zsr-sw-01 (config-if)#spantree cost 20 zsr-sw-01(config-if)#exit zsr-sw-01#write memory 3.3 局办公楼Catalyst 3548XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname yy-sw-01 yy-sw-01(config)#enable password test yy-sw-01(config)#enable secret test yy-sw-01(config)#banner motd % Welcome to the C3548 in the Yi Yang Fen Ju % yy-sw-01(config)#line vty 0 4 yy-sw-01(config.line)#login yy-sw-01(config.line)#password test yy-sw-01(config.line)#exit yy-sw-01(config)#int vlan 1 yy-sw-01(config-if)#ip address 10.234.180.26 255.255.255.0 yy-sw-01(config-if)#exit yy-sw-01(config)#ip default.gateway 10.234.180.234 yy-sw-01(config)#end yy-sw-01#vlan database yy-sw-01(vlan)#vtp domain Corp_Net yy-sw-01(vlan)#vtp client yy-sw-01(vlan)#exit yy-sw-1#configure terminal yy-sw-1(config)#int f0/1 yy-sw-1(config-if)#switchport mode access yy-sw-1(config-if)#switchport access vlan 32 yy-sw-1(config-if)#exit yy-sw-1(config)#int f0/2 。。。。。。 yy-sw-1(config)#int f0/48 yy-sw-1(config-if)#switchport mode access yy-sw-1(config-if)#switchport access vlan 32 yy-sw-1(config-if)#exit yy-sw-01#write memory 3.4 检修设计Catalyst 3548XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname jxsj-sw-01 jxsj-sw-01(config)#enable password test jxsj-sw-01(config)#enable secret test jxsj-sw-01(config)#banner motd % Welcome to the C3548 in the Jian Xiu She Ji Fen Ju % jxsj-sw-01(config)#line vty 0 4 jxsj-sw-01(config.line)#login jxsj-sw-01(config.line)#password test jxsj-sw-01(config.line)#exit jxsj-sw-01(config)#int vlan 1 jxsj-sw-01(config-if)#ip address 10.234.180.27 255.255.255.0 jxsj-sw-01(config-if)#exit jxsj-sw-01(config)#ip default.gateway 10.234.180.234 jxsj-sw-01(config)#end jxsj-sw-01#vlan database jxsj-sw-01(vlan)#vtp domain Corp_Net jxsj-sw-01(vlan)#vtp client jxsj-sw-01(vlan)#exit jxsj-sw-1#configure terminal jxsj-sw-1(config)#int f0/1 jxsj-sw-1(config-if)#switchport mode access jxsj-sw-1(config-if)#switchport access vlan 33 jxsj-sw-1(config-if)#exit jxsj-sw-1(config)#int f0/2 。。。。。。 jxsj-sw-1(config)#int f0/48 jxsj-sw-1(config-if)#switchport mode access jxsj-sw-1(config-if)#switchport access vlan 33 jxsj-sw-1(config-if)#exit jxsj-sw-01(config)#int g0/1 jxsj-sw-01(config-if)#switchport mode trunk jxsj-sw-01(config-if)#switchport trunk encapsulation dot1q jxsj-sw-01(config-if)#switchport trunk allowed vlan all jxsj-sw-01 (config-if)#spantree cost 10 jxsj-sw-01(config-if)#exit jxsj-sw-01(config)#int g0/2 jxsj-sw-01(config-if)#switchport mode trunk jxsj-sw-01(config-if)#switchport trunk encapsulation dot1q jxsj-sw-01(config-if)#switchport trunk allowed vlan all jxsj-sw-01 (config-if)#spantree cost 20 jxsj-sw-01(config-if)#exit jxsj-sw-01#write memory 3.5 总公司Catalyst 3524XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname rd-sw-01 rd-sw-01(config)#enable password test rd-sw-01(config)#enable secret test rd-sw-01(config)#banner motd % Welcome to the C3524 in the Rao Dian Zong Gong Si % rd-sw-01(config)#line vty 0 4 rd-sw-01(config.line)#login rd-sw-01(config.line)#password test rd-sw-01(config.line)#exit rd-sw-01(config)#int vlan 1 rd-sw-01(config-if)#ip address 10.234.180.28 255.255.255.0 rd-sw-01(config-if)#exit rd-sw-01(config)#ip default gateway 10.234.180.234 rd-sw-01(config)#end rd-sw-01#vlan database rd-sw-01(vlan)#vtp domain Corp_Net rd-sw-01(vlan)#vtp client rd-sw-01(vlan)#exit rd-sw-01#configure terminal rd-sw-01(config)#int f0/1 rd-sw-01(config-if)#switchport mode access rd-sw-01(config-if)#switchport access vlan 34 rd-sw-01(config-if)#exit rd-sw-01(config)#int f0/2 。。。。。。 rd-sw-01(config)#int f0/24 rd-sw-01(config-if)#switchport mode access rd-sw-01(config-if)#switchport access vlan 34 rd-sw-01(config-if)#exit rd-sw-01(config)#int g0/1 rd-sw-01(config-if)#switchport mode trunk rd-sw-01(config-if)#switchport trunk encapsulation dot1q rd-sw-01(config-if)#switchport trunk allowed vlan all rd-sw-01(config-if)#exit rd-sw-01#write memory 3.6 山楼Catalyst 3524XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname jsl-sw-01 jsl-sw-01(config)#enable password test jsl-sw-01(config)#enable secret test jsl-sw-01(config)#banner motd % Welcome to the C3524 in the Jin San Lou % jsl-sw-01(config)#line vty 0 4 jsl-sw-01(config.line)#login jsl-sw-01(config.line)#password test jsl-sw-01(config.line)#exit jsl-sw-01(config)#int vlan 1 jsl-sw-01(config-if)#ip address 10.234.180.29 255.255.255.0 jsl-sw-01(config-if)#exit jsl-sw-01(config)#ip default.gateway 10.234.180.234 jsl-sw-01(config)#end jsl-sw-01#vlan database jsl-sw-01(vlan)#vtp domain Corp_Net jsl-sw-01(vlan)#vtp client jsl-sw-01(vlan)#exit jsl-sw-1#configure terminal jsl-sw-1(config)#int f0/1 jsl-sw-1(config-if)#switchport mode access jsl-sw-1(config-if)#switchport access vlan 35 jsl-sw-1(config-if)#exit jsl-sw-1(config)#int f0/2 。。。。。。 jsl-sw-1(config)#int f0/24 jsl-sw-1(config-if)#switchport mode access jsl-sw-1(config-if)#switchport access vlan 35 jsl-sw-1(config-if)#exit jsl-sw-01(config)#int g0/1 jsl-sw-01(config-if)#switchport mode trunk jsl-sw-01(config-if)#switchport trunk encapsulation dot1q jsl-sw-01(config-if)#switchport trunk allowed vlan all jsl-sw-01(config-if)#exit jsl-sw-01#write memory 3.7 公司Catalyst 3524XL交换机配置方案 switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#hostname wz-sw-01 wz-sw-01(config)#enable password test wz-sw-01(config)#enable secret test wz-sw-01(config)#banner motd % Welcome to the C3524 in the Wu Zi Gong Si % wz-sw-01(config)#line vty 0 4 wz-sw-01(config.line)#login wz-sw-01(config.line)#password test wz-sw-01(config.line)#exit wz-sw-01(config)#int vlan 1 wz-sw-01(config-if)#ip address 10.234.180.30 255.255.255.0 wz-sw-01(config-if)#exit wz-sw-01(config)#ip default.gateway 10.234.180.234 wz-sw-01(config)#end wz-sw-01#vlan database wz-sw-01(vlan)#vtp domain Corp_Net wz-sw-01(vlan)#vtp client wz-sw-01(vlan)#exit wz-sw-1#configure terminal wz-sw-1(config)#int f0/1 wz-sw-1(config-if)#switchport mode access wz-sw-1(config-if)#switchport access vlan 36 wz-sw-1(config-if)#exit wz-sw-1(config)#int f0/2 。。。。。。 wz-sw-1(config)#int f0/24 wz-sw-1(config-if)#switchport mode access wz-sw-1(config-if)#switchport access vlan 36 wz-sw-1(config-if)#exit wz-sw-01(config)#int g0/1 wz-sw-01(config-if)#switchport mode trunk wz-sw-01(config-if)#switchport trunk encapsulation dot1q wz-sw-01(config-if)#switchport trunk allowed vlan all wz-sw-01(config-if)#exit ------------------------------------------------------------------------------- 四、CISCO 2620路由器配置方案 //8个异步拨号口 一个fast以太口 route#conf t route(config)#hostname c2620 c2620 (config)#enable secret test c2620 (config)#enable password test c2620 (config)#username test password test c2620 (config)#banner motd “ Welcome to the C2620 in the Office “ c2620 (config)#int f0/0 c2620(config-if)#ip address 10.234.180.254 255.255.255.0 c2620(config-if)#no shutdown c2620(config-if)#int group-async 1 c2620(config-if)# ip unnumbered FastEthernet0/0 c2620(config-if)#peer default ip address pool default c2620(config-if)#async mode interactive c2620(config-if)#async default routing c2620(config-if)#encap ppp c2620(config-if)#ppp authen chap pap c2620(config-if)#group 33 48 c2620(config-if)#exit c2620(config)#ip local pool default 10.234.180.218 10.234.180.233 c2620(config)#ip routing c2620(config-if)#exit c2620(config)#line 33 48 c2620(config-line)#transport input all c2620(config-line)#autoselect ppp c2620(config-line)#autocommand ppp c2620(config-line)# modem autoconfigure discovery c2620(config-line)#login local c2620(config-line)#modem inout c2620(config-line)# stopbits 1 c2620(config-line)# flowcontrol hardware c2620(config-line)# exit c2620(config)# line vty 0 4 c2620(config-line)# login c2620(config-line)# password test c2620(config-line)# line aux 0 c2620(config-line)# login local c2620(config-line)# modem inout c2620(config-line)# modem autoconfigure discovery c2620(config-line)# transport input all c2620(config-line)# flowcontrol hardware c2620(config-line)# exit c2620(config)# 注: 1、使用用dot1q封装是考虑以后网络扩展加入3com等其它产品,再说大多数工程师载配置事都喜欢用用dot1q封装很少用isl的。 2、使用6509和4006是因为考虑spantree啊,保证在6509down掉后使用4006接管吗,你没看到在6509上Bg-sw-01> (enable) set spantree root 1-40 dia 4 /设为spantree的根,但是你说的子交换机可以通过两根光纤连接到6509上,但是这里6509没有配置双引擎啊,做不到自身冗余啊。
|
|
原文地址 http://xfei-sars.spaces.live.com/blog/ |
内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理