使用profile来得到程序运行信息
2005-10-09 11:21
429 查看
使用profile来得到程序运行信息
profile程序可以用来监测程序不同部分(主要是各个函数)的使用时间和调用次数。
因此可以使用这个程序来鉴别程序中那个函数是整个程序的瓶颈,从而可以通过优化这个
函数来提高程序的性能。
Unix/Linux系统提供了GPROF这个profile程序。该程序提供两种信息:
1、程序中每个函数的CPU使用时间。
2、每个函数的调用次数。并提供简单调用关系图。
使用GPROF步骤如下:
1、用gcc或g++编译程序时,使用-pg参数,如:g++ -pg -o test.out test.cpp
2、执行编译得到的运行程序。如:./test.out
该步骤运行程序的时间会稍慢于正常编译出来的程序执行时间。而且会产生一个
gmon.out文件。
3、使用gprof命令。如:gprof test.out
于是可以在显示器上看到上述信息。
/////////////////////////////////////////////////////////////////////////////
ps1:test.cpp程序使用gprof得到的结果
Flat profile:
Each sample counts as 0.01 seconds.
% cumulative self self total
time seconds seconds calls ms/call ms/call name
60.00 0.09 0.09 50 1.80 1.80 test2(int)
40.00 0.15 0.06 50 1.20 1.20 test1(int)
% the percentage of the total running time of the
time program used by this function.
cumulative a running sum of the number of seconds accounted
seconds for by this function and those listed above it.
self the number of seconds accounted for by this
seconds function alone. This is the major sort for this
listing.
calls the number of times this function was invoked, if
this function is profiled, else blank.
self the average number of milliseconds spent in this
ms/call function per call, if this function is profiled,
else blank.
total the average number of milliseconds spent in this
ms/call function and its descendents per call, if this
function is profiled, else blank.
name the name of the function. This is the minor sort
for this listing. The index shows the location of
the function in the gprof listing. If the index is
in parenthesis it shows where it would appear in
the gprof listing if it were to be printed.
Call graph (explanation follows)
granularity: each sample hit covers 4 byte(s) for 6.67% of 0.15 seconds
index % time self children called name
<spontaneous>
[1] 100.0 0.00 0.15 main [1]
0.09 0.00 50/50 test2(int) [2]
0.06 0.00 50/50 test1(int) [3]
-----------------------------------------------
0.09 0.00 50/50 main [1]
[2] 60.0 0.09 0.00 50 test2(int) [2]
-----------------------------------------------
0.06 0.00 50/50 main [1]
[3] 40.0 0.06 0.00 50 test1(int) [3]
-----------------------------------------------
This table describes the call tree of the program, and was sorted by
the total amount of time spent in each function and its children.
Each entry in this table consists of several lines. The line with the
index number at the left hand margin lists the current function.
The lines above it list the functions that called this function,
and the lines below it list the functions this one called.
This line lists:
index A unique number given to each element of the table.
Index numbers are sorted numerically.
The index number is printed next to every function name so
it is easier to look up where the function in the table.
% time This is the percentage of the `total' time that was spent
in this function and its children. Note that due to
different viewpoints, functions excluded by options, etc,
these numbers will NOT add up to 100%.
self This is the total amount of time spent in this function.
children This is the total amount of time propagated into this
function by its children.
called This is the number of times the function was called.
If the function called itself recursively, the number
only includes non-recursive calls, and is followed by
a `+' and the number of recursive calls.
name The name of the current function. The index number is
printed after it. If the function is a member of a
cycle, the cycle number is printed between the
function's name and the index number.
For the function's parents, the fields have the following meanings:
self This is the amount of time that was propagated directly
from the function into this parent.
children This is the amount of time that was propagated from
the function's children into this parent.
called This is the number of times this parent called the
function `/' the total number of times the function
was called. Recursive calls to the function are not
included in the number after the `/'.
name This is the name of the parent. The parent's index
number is printed after it. If the parent is a
member of a cycle, the cycle number is printed between
the name and the index number.
If the parents of the function cannot be determined, the word
`<spontaneous>' is printed in the `name' field, and all the other
fields are blank.
For the function's children, the fields have the following meanings:
self This is the amount of time that was propagated directly
from the child into the function.
children This is the amount of time that was propagated from the
child's children to the function.
called This is the number of times the function called
this child `/' the total number of times the child
was called. Recursive calls by the child are not
listed in the number after the `/'.
name This is the name of the child. The child's index
number is printed after it. If the child is a
member of a cycle, the cycle number is printed
between the name and the index number.
If there are any cycles (circles) in the call graph, there is an
entry for the cycle-as-a-whole. This entry shows who called the
cycle (as parents) and the members of the cycle (as children.)
The `+' recursive calls entry shows the number of function calls that
were internal to the cycle, and the calls entry for each member shows,
for that member, how many times it was called from other members of
the cycle.
Index by function name
[3] test1(int) [2] test2(int)
///////////////////////////////////////////////////////////////////////
ps2:test.cpp文件
/* test.cpp */
#include <stdio.h>
#include <math.h>
int test1(int n)
{
int temp = 0;
for (int i = 0; i < 10000; i++)
temp = sqrt(i);
return temp*n;
}
int test2(int n)
{
int temp = 0;
for (int i = 0; i < 10000; i++)
temp = cos(i);
return temp * n;
}
int main(int argc, char * argv[])
{
int temp = 0;
for (int i = 0; i < 100; i++)
{
if ( i % 2 == 0)
temp = test1(i);
else
temp = test2(i);
printf("%d/n",temp);
}
return 1;
}
profile程序可以用来监测程序不同部分(主要是各个函数)的使用时间和调用次数。
因此可以使用这个程序来鉴别程序中那个函数是整个程序的瓶颈,从而可以通过优化这个
函数来提高程序的性能。
Unix/Linux系统提供了GPROF这个profile程序。该程序提供两种信息:
1、程序中每个函数的CPU使用时间。
2、每个函数的调用次数。并提供简单调用关系图。
使用GPROF步骤如下:
1、用gcc或g++编译程序时,使用-pg参数,如:g++ -pg -o test.out test.cpp
2、执行编译得到的运行程序。如:./test.out
该步骤运行程序的时间会稍慢于正常编译出来的程序执行时间。而且会产生一个
gmon.out文件。
3、使用gprof命令。如:gprof test.out
于是可以在显示器上看到上述信息。
/////////////////////////////////////////////////////////////////////////////
ps1:test.cpp程序使用gprof得到的结果
Flat profile:
Each sample counts as 0.01 seconds.
% cumulative self self total
time seconds seconds calls ms/call ms/call name
60.00 0.09 0.09 50 1.80 1.80 test2(int)
40.00 0.15 0.06 50 1.20 1.20 test1(int)
% the percentage of the total running time of the
time program used by this function.
cumulative a running sum of the number of seconds accounted
seconds for by this function and those listed above it.
self the number of seconds accounted for by this
seconds function alone. This is the major sort for this
listing.
calls the number of times this function was invoked, if
this function is profiled, else blank.
self the average number of milliseconds spent in this
ms/call function per call, if this function is profiled,
else blank.
total the average number of milliseconds spent in this
ms/call function and its descendents per call, if this
function is profiled, else blank.
name the name of the function. This is the minor sort
for this listing. The index shows the location of
the function in the gprof listing. If the index is
in parenthesis it shows where it would appear in
the gprof listing if it were to be printed.
Call graph (explanation follows)
granularity: each sample hit covers 4 byte(s) for 6.67% of 0.15 seconds
index % time self children called name
<spontaneous>
[1] 100.0 0.00 0.15 main [1]
0.09 0.00 50/50 test2(int) [2]
0.06 0.00 50/50 test1(int) [3]
-----------------------------------------------
0.09 0.00 50/50 main [1]
[2] 60.0 0.09 0.00 50 test2(int) [2]
-----------------------------------------------
0.06 0.00 50/50 main [1]
[3] 40.0 0.06 0.00 50 test1(int) [3]
-----------------------------------------------
This table describes the call tree of the program, and was sorted by
the total amount of time spent in each function and its children.
Each entry in this table consists of several lines. The line with the
index number at the left hand margin lists the current function.
The lines above it list the functions that called this function,
and the lines below it list the functions this one called.
This line lists:
index A unique number given to each element of the table.
Index numbers are sorted numerically.
The index number is printed next to every function name so
it is easier to look up where the function in the table.
% time This is the percentage of the `total' time that was spent
in this function and its children. Note that due to
different viewpoints, functions excluded by options, etc,
these numbers will NOT add up to 100%.
self This is the total amount of time spent in this function.
children This is the total amount of time propagated into this
function by its children.
called This is the number of times the function was called.
If the function called itself recursively, the number
only includes non-recursive calls, and is followed by
a `+' and the number of recursive calls.
name The name of the current function. The index number is
printed after it. If the function is a member of a
cycle, the cycle number is printed between the
function's name and the index number.
For the function's parents, the fields have the following meanings:
self This is the amount of time that was propagated directly
from the function into this parent.
children This is the amount of time that was propagated from
the function's children into this parent.
called This is the number of times this parent called the
function `/' the total number of times the function
was called. Recursive calls to the function are not
included in the number after the `/'.
name This is the name of the parent. The parent's index
number is printed after it. If the parent is a
member of a cycle, the cycle number is printed between
the name and the index number.
If the parents of the function cannot be determined, the word
`<spontaneous>' is printed in the `name' field, and all the other
fields are blank.
For the function's children, the fields have the following meanings:
self This is the amount of time that was propagated directly
from the child into the function.
children This is the amount of time that was propagated from the
child's children to the function.
called This is the number of times the function called
this child `/' the total number of times the child
was called. Recursive calls by the child are not
listed in the number after the `/'.
name This is the name of the child. The child's index
number is printed after it. If the child is a
member of a cycle, the cycle number is printed
between the name and the index number.
If there are any cycles (circles) in the call graph, there is an
entry for the cycle-as-a-whole. This entry shows who called the
cycle (as parents) and the members of the cycle (as children.)
The `+' recursive calls entry shows the number of function calls that
were internal to the cycle, and the calls entry for each member shows,
for that member, how many times it was called from other members of
the cycle.
Index by function name
[3] test1(int) [2] test2(int)
///////////////////////////////////////////////////////////////////////
ps2:test.cpp文件
/* test.cpp */
#include <stdio.h>
#include <math.h>
int test1(int n)
{
int temp = 0;
for (int i = 0; i < 10000; i++)
temp = sqrt(i);
return temp*n;
}
int test2(int n)
{
int temp = 0;
for (int i = 0; i < 10000; i++)
temp = cos(i);
return temp * n;
}
int main(int argc, char * argv[])
{
int temp = 0;
for (int i = 0; i < 100; i++)
{
if ( i % 2 == 0)
temp = test1(i);
else
temp = test2(i);
printf("%d/n",temp);
}
return 1;
}
相关文章推荐
- 使用profile来得到程序运行信息
- 使用profile来得到程序运行信息
- 使用profile来得到程序运行信息
- 使用profile来得到程序运行信息
- C语言linux环境下使用gettimeofday函数得到程序运行时间
- 使用Windows API实现运行时动态获取程序文件版本信息
- 得到用户手机中的程序使用流量的信息
- 使用memory_profiler 与 cProfile ,line_profiler 优化Python程序运行时间和内存消耗实例
- HDFS设计思路,HDFS使用,查看集群状态,HDFS,HDFS上传文件,HDFS下载文件,yarn web管理界面信息查看,运行一个mapreduce程序,mapreduce的demo
- 于仕琪老师《OpenCV入门教程》中某一程序在我电脑VS2008,opencv2.3.1上运行错误,“未使用调试信息生成二进制文件”,留待解决,
- 练习1-1 在你自己的程序中运行“hello,world”程序。再有意去掉部分内容,看看会得到什么错误信息。
- 得到android多有的正在运行的程序信息
- 为golang程序使用pprof远程查看httpserver运行堆栈,cpu耗时等信息
- 如何得到运行程序的路径,以及如何得到路径的文件夹,文件名,以及类型等等信息
- 为golang程序使用pprof远程查看httpserver运行堆栈,cpu耗时等信息
- HDFS设计思路,HDFS使用,查看集群状态,HDFS,HDFS上传文件,HDFS下载文件,yarn web管理界面信息查看,运行一个mapreduce程序,mapreduce的demo
- How To Get Application Path,And How To Get The Path's Directory,File Name,And Type Info(如何得到运行程序的路径,以及如何得到路径的文件夹,文件名,以及类型等等信息)
- 以不同用户身份运行程序,/savecred只需要输入一次密码(GetTokenByName取得EXPLORER.EXE的令牌,然后调用CreateProcessAsUser,而且使用LoadUserProfile解决另存文件的问题)good
- 使用Process Monitor来得到程序运行参数
- 以字符串形式得到程序运行堆栈信息